Болт 413-618

Артикул: 413-618
Наличие: Под заказ
Предложений: 1
Производитель: Case IH

Цена за штуку 50 ₽

Цена с НДС

актуально на момент последнего обновления каталога

Кол-во

Введите нужное количество и нажмите «Уточнить наличие» — цена и сроки поставки обновятся.

Итого за 1 шт. 50 ₽

Купить

Доступные предложения

Склад Уфа 50 ₽ Остаток по запросу: 0 шт.

Нет в наличии

По каталогу Case IH

Название: Болт, Hex, 3/8" - 16 x 1-1/8", Gr 5
Название (EN): BOLT,Hex, 3/8" - 16 x 1-1/8", Gr 5
Размеры и исполнение: SETSCREW - 3/8 UNC x 1 1/8 in. frame to cylinder block| setscrew, 3/8 UNC x 1 1/8 in. frame to cylinder block| SETSCREW - 3/8 UNC x 1 1/8 in.--pedal stop| setscrew, 3/8 UNC x 1 1/8 in., bevel pinion gears| setscrew, 3/8 UNC x 1 1/8 in.| SETSCREW, 3/8 UNC x 1 1/8 in. frame to cylinder block| Setscrew, 3/8 UNC x 1 1/8 in. Frame to cylinder block| SETSCREW, 3/8 UNC x 1 1/8 in. (frame to cylinder block)| setscrew, 3/8 UNC x 1 1/8 in. pipe to relief valve| SETSCREW - 3/8 UNC x 1 1/8 in. cover to case| SETSCREW - 3/8 UNC x 1 1/8 in. pump to back plate| SETSCREW - 3/8 UNC x 1 1/8 in.| SETSCREW - 3/8 UNC x 1 1/8 in., double-acting sensing unit (583397 onward)| SETSCREW - 3/8 UNC x 1 1/8 in. check chain to PTO case| setscrew, 3/8 UNC x 1 1/8 in. pump to back plate| 4WD| Vis tête hexagonale 9,5 x 28,5 mm gros filet (3/8" x 1-1/8" NC)| 5/8-11 x 4| 5/8-11 x 4 C| SETSCREW - 3/8 UNC x 1 1/8 in. filler to frame| SETSCREW - 3/8 UNC x 1 1/8 in. starter to engine| SETSCREW - 3/8 UNC x 1 1/8 in. gearbox cover to main frame (replaces 602904)| Vis à tête hexagonale 9,5 x 28,6 mm (3/8 x 1-1/8") NC (gros filet)| SETSCREW, 3/8 UNC x 1 1/8 in order K966428 (10) cylinder block to main frame| SETSCREW - 3/8 UNC x 1 1/8 in. flywheel housing to engine| setscrew, 3/8 UNC x 1 1/8 in. 700001 to 704901| setscrew, 3/8 UNC x 1 1/8 in. 482001 to 800000| setscrew, 3/8 UNC x 1 1/8 in. housing to rear frame| Vis tete hexagonale 9,5 x 28,5 mm (3/8 x 1-1/8") gros filet (NC)| Vis tete hexagonal 9,5 x 22,2 mm gros filet (3/8 x 1-1/8" NC)| Vis de cage de roulement| - hex, 5/8 NC x 4 inch| (Replaces bolt 179840) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Cylinder block to main frame Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Setscrew, 3/8 UNC x 1-1/8 in., 950| Setscrew, 3/8 UNC x 1 1/8 in. Cover to reduction case| SETSCREW, 3/8 UNC x 1 1/8 in. (cover to reduction)| SETSCREW, 3/8 UNC x 1 1/8 in. (cover to case)| Setscrew, 3/8 UNC x 1 1/8 in. Pump to Back Plate| SETSCREW, 3/8 UNC x 1 1/8 in. (pump to back plate)| BOLT, (Replaces bolt 180123) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| (Replaces bolt 179840)| MFD| 50110 MFD| BOLT, (Replaces bolt 179840) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| BOLT, Hex, 3/8"-16 x 1 1/8", G5, Full Thd| (Replaces setscrew K602905), housing Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Eighteen used with housing K954072, K954071, K954074 and K954073; twenty used with all other housing Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Setscrew, 3/8 UNC x 1 1/8 in. Pump to back plate| (Replaces bolt K602985) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| BOLT, (Replaces bolt 179840), Not Illustrated Hex, 3/8"-16 x 1 1/8", G5, Full Thd| 5/8-11 X 4 C| Pipes to relief valve Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Pump to plate (Replaces bolt K602905) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Chains to PTO housing (Replaces bolt K602905) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Chain to PTO housing (Replaces bolt K602905) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| (Replaces bolt K602905) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| SETSCREW, 3/8 UNC x 1 1/8 in. (flywheel housing to engine)| SETSCREW, 3/8 UNC x 1 1/8 in.| Setscrew, 3/8 UNC x 1 1/8 in.| Setscrew, 3/8 UNC x 1 1/8 in. Housing to rear frame| Hinges to bulkhead (Replaces setscrew K602985) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| (1490, 1494, 1594, 1690 and 1694) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| Hinges to bulkhead (Replaces bolt K602985) Hex, 3/8"-16 x 1 1/8", G5, Full Thd| SETSCREW, 3/8UNC x 1 1/8 in order K966428 (10) cylinder block to main frame| SETSCREW, 3/8 UNC x 1-1/8 in., frame to cylinder block| SETSCREW - 3/8 NC x 1-1/8 in. (Cylinder block to main frame)| SETSCREW, 3/8 UNC x 1 1/8 in. frame to cylinder| SETSCREW, 3/8 UNC x 1-1/8 in., frame cylinder block| SETSCREW, 3/8 UNC x 1 1/8 in. - pedal stop| SETSCREW, 3/8 UNC x 1 1/8 in| SETSCREW, 3/8 UNC x 1-1/8 in., gearbox case| Order K966428 (10)| SETSCREW - 3/8 UNC x 1-1/8 (Cover to case)| SETSCREW, 3/8 UNC x 1-1/8 in.| SETSCREW, 3/8 UNC x 1 1/8 in (Cover to reduction gear case)| Set, order K966428 (10), cover to case| SETSCREW, 3/8 UNC x 1 1/8 in (Pipes to right-hand hitch bracket)| SETSCREW - 3/8 UNC x 1-1/8 in. (Pump to plate)| SETSCREW, 3/8 UNC x 1-1/8 in, pipe to relief valve| SETSCREW - 3/8 UNC x 1-1/8 in.| SETSCREW, 3/8 UNC x 1-1/8 in, pump to plate| SETSCREW, 3/8 UNC x 1 1/8 in. (pump to plate)| SETSCREW, 3/8 UNC x 1-1/8 in, chains to PTO case| SETSCREW, 3/8 UNC x 1-1/8 in| SETSCREW, 3/8UNC x 1 1/8 in order K966428 (10) pump to plate| Set, order, order K966428(10), pump to plate| SETSCREW, 3/8 UNC x 1 1/8 in order K966428 (10) pump to plate| SETSCREW, 3/8UNC x 1 1/8 in order K966428 (10) Category 1 linkage only, 1190 without deck or cab| SETSCREW, 3/8UNC x 1 1/8 in order K966428 (10) Category 1 linkage only, 1190 cab model| SETSCREW, 3/8UNC x 1 1/8 in order K966428 (10) Dual category linkage only| Set, order, order K966428(10)| SETSCREW, 3/8UNC x 1 1/8 in order K966428 (10)| SETSCREW, 3/8 UNC x 1-1/8 in, filler to frame| SETSCREW, 3/8 UNC x 1-1/8 in, clutch housing to frame| SETSCREW, 3/8 UNC x 1 1/8 in order K966428 (10)| SETSCREW, 3/8 UNC x 1-1/8 in, housing to frame (990, 995)| SETSCREW, 3/8 UNC x 1 1/8 in. (filler to frame)| SETSCREW, 3/8 UNC x 1 1/8 in. (clutch housing to frame)| SETSCREW - 3/8 UNC x 1-1/8 in. (Hinges to bulkhead)| SETSCREW, 3/8 UNC x 1 1/8 in (Hinges to bulkhead)| SETSCREW, 3/8 UNC x 1-1/8 in, hinges to bulkhead| SETSCREW, 3/8 UNC x 1 1/8 in., 885 (starter to engine)| SETSCREW, 3/8 UNC x 1-1/8 in, starter to engine. (885)| Set, order, order K966428(10), standard tractor| Set, order K966428 (10) bracket to front extension| Set, order, order K966428(10), available separately pr as part of assy. UK5480| Set, order, order K966428(10), available separately or as part of assy. UK5478
Система техники: ENGINE, BRAKES, Drive Train, CLUTCH, Gearbox, Final Drive Reductions, HYDRAULIC SYSTEM, POWER TRAIN, PLATFORM, CAB, BODYWORK AND DECALS, MAIN FRAME, HYDRAULICS, CHASSIS, ELECTRICAL SYSTEMS, BEATER & CLEANING FANS, Power, COMPLETE MACHINE, FUEL SYSTEM, FRAMES AND BALLASTING, CROP STORAGE/UNLOADING, ATTACHMENTS/HEADERS, CHASSIS/ATTACHMENTS, REAR AXLE, IMPLEMENT LIFT, FRAME, SHEET METAL, OPERATORS PLATFORM/CAB, WHEELS & WEIGHTS

Применяется на технике

770A
770B
780
1200
880A
880B
990
385
484
485
248
880E
880F
990A
990B
880UE
880UF
CX50
CX60
CX70
CX80
CX90
CX100
F-235D
8880
8575
8576
CPX610
F-235
2377

Ещё 84

2388
2366
2365
1190E
744
844
644
844S
9190
KP-525
495
395
3210
3220
3230
4230
4210
4220
D-282
1194
885
885N
1210
1212
238
595
258
895
268
695
288
795
2394
2594
D-301
880
950
850
1260
1400
4240
D-236
D-310
695XL
795XL
895XL
995XL
595XL
495XL
D-358
1694
95-SERIES
1490
1294
1594
1494
1394
DT-407
D-407
8750
DT-361
D-361
8830
8820
8840
L1200
QD90
DT-429
3204
3205
3206
900
1680
1660
2188
1688
1190
995
996
1410
1412
1690
1290
1390

Сборочные узлы

CYLINDER BLOCK, SLEEVES AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS, 449001-2
PARK LOCK
BELT PULLEY, ATTACHMENT, BELT PULLEY, W/SAFETY SHIELD - TRACTORS W/DUAL SPEED IPTO

Ещё 192

CLUTCH, FOOT CONTROL
GEARBOX
FINAL DRIVE
HIGH-PRESSURE HYDRAULIC PIPES, SINGLE PUMP
HIGH-PRESSURE HYDRAULIC PIPES, TANDEM PUMP, OPTIONAL EQUIPTMENT
FINAL DRIVE, HEAVY DUTY U1302
HYDRAULIC LIFT PUMP
HYDRAULIC LIFT PUMP, TRACTOR 580001 TO 586962
HYDRAULIC LIFT PUMP, TRACTOR 586963 ONWARD
HYDRAULIC LIFT PUMP, TRACTOR 530001 TO 540165
SENSING UNIT AND TOP LINK
HYDRAULIC LIFT PUMP, TRACTOR 540166 ONWARD
LIFT RODS AND LOWER LINKS
HYDRAULIC LIFT PUMP, TRACTOR 482001 TO 497727
REAR FRAME
HYDRAULIC LIFT PUMP, TRACTOR 497728 ONWARD
SENSING UNIT
SENSING UNIT, ADJUSTABLE, OPTIONAL EQUIPMENT
SENSING UNIT, NON-ADJUSTABLE
INTAKE AND EXHAUST MANIFOLDS
CAB FRAME, MIRROR AND SHIELD ASSEMBLIES
WHEEL, HUB AND AXLE ASSEMBLY
PARK BRAKE LINKAGE - 2 W.D.
CONVEYOR UNLOADER MOTOR SYSTEM - BSN JJC0250100
MAIN FRAME AND COVERS
ELECTRICAL EQUIPMENT, TRACTOR 588498 ONWARD
ELECTRICAL EQUIPMENT, TRACTOR 580001 TO 588497
DISTRIBUTOR DRIVE & COIL ASSY.
CLEANING FAN - DRIVE SPEED CONTROL
CYLINDER BLOCK ASSEMBLIES
DRAFT CONTROL LINKAGE
WATER PUMP CARRIER AND THERMOSTAT
ELECTRICAL EQUIPMENT
ELECTRICAL EQUIPMENT, TRACTOR 544392 ONWARD
ELECTRICAL EQUIPMENT, TRACTOR 530001 TO 544391
FUEL TANK - FILTER AND FUEL LINES, FOR FARMALL F-235
FUEL TANK AND INTAKE PIPING, FOR FARMALL F-235-D
REAR AXLE & DIFFERENTIAL
FOOT BRAKE , 664/744/844, IF SO EQUIPPED
BRAKE LINES , 744/844/844S, IF SO EQUIPPED
ENGINE MOUNTING
DOWNSWEPT EXHAUST
UNDERSLUNG EXHAUST
UNDERSLUNG EXHAUST, 4210, 4220, 4230, WITHOUT CAB
FUEL INJECTION PUMP AND CONNECTIONS, 706 TRACTORS W/INTERNATIONAL R.D. PUMP
OIL PRESSURE GAUGE AND SWITCH / INTAKE MANIFOLD AND EXHAUST SYSTEM, 403 COMBINES
INTAKE AND EXHAUST MANIFOLD, ALL MACHINES EXCEPT 403 COMBINES
UNDERSLUNG EXHAUST AND MANIFOLD
THROTTLE CONTROLS
INTAKE MANIFOLDS AND EXHAUST SYSTEMS
INTAKE AND EXHAUST MANIFOLD
FINAL DRIVE REDUCTIONS
HYDRAULIC LIFT PUMP, ALL MODELS
FRAME - VACUUM SYSTEM
STARTER ASSEMBLY
WORKLIGHT, WITHOUT CAB
INTAKE AND EXHAUST MANIFOLD / EXHAUST SYSTEM
FUEL INJECTION PUMP & CONNECTIONS, 616 & 622 W/SPIN-ON TYPE FILTER & BOSCH BR/CR FUEL INJECTION PUMP
THERMOSTAT & WATER PUMP, 706 & 756 TRACTORS S/N 52-P-728 & AFTER, 95/715/782/686 & HYDRO 86
TRANSMISSION MOUNTING
CLUTCH CONTROLS, LOWER, TRACTOR WITH CAB
MECHANICAL FRONT DRIVE "ZF", DRIVE SHAFT AND SHIELD
MECHANICAL FRONT DRIVE, DRIVE SHAFT AND SHIELD
CLUTCH CONTROLS - LOWER, WITH CAB
MECHANICAL FRONT DRIVE "CARRARO", DRIVE SHAFT AND SHIELD
CLUTCH CONTROLS, WITH CAB
CLUTCH CONTROLS, LOWER
DRIVE SHAFT AND SHIELD, MFD
DRIVE SHAFT AND SHIELD - MFD
THERMOSTAT AND WATER PUMP
MECHANICAL FRONT DRIVE ZF, DRIVE SHAFT AND SHIELD
MECHANICAL FRONT DRIVE CARRARO, DRIVE SHAFT AND SHIELD
GEARBOX HOUSING, FRONT
GEARBOX HOUSING, REAR
DRIVE SHAFT AND SHIELD
DRIVE SHAFT AND SHIELD, MFD AXLE
FINAL DRIVE HOUSING AND COVERS
GEARBOX CASE, HYDRA-SHIFT
FINAL DRIVE REDUCTION HOUSING AND COVERS
GEARBOX HOUSING - FRONT, POWER SHIFT
GEARBOX HOUSING - REAR, POWER SHIFT
GEARBOX HOUSING, FRONT, POWER SHIFT
GEARBOX HOUSING, REAR, POWER SHIFT
GEARBOX HOUSING - FRONT, POWER SHIFT TRACTORS
CASE AND COVERS FOR FINAL DRIVES, TRACTORS WITH DISC BRAKES
GEARBOX HOUSING - REAR, POWER SHIFT TRACTORS
CASE AND COVERS FOR FINAL DRIVES, TRACTORS WITH DRUM BRAKES
HOUSING AND COVERS FOR FINAL DRIVES
GEARBOX ASSEMBLIES AND HOUSING, 1212, 1212Q, 1212SK AND 1212G TRACTORS
FINAL DRIVE, HOUSING AND COVERS
PARK BRAKE LINKAGE, 2WD
BRAKE SLAVE CYLINDERS AND PIPES, 885Q HIGHWAY TRACTORS
CYLINDER HEAD AND RELATED PARTS
PARK BRAKE LINKAGE, TWO WHEEL DRIVE
FUEL INJECTION PUMP AND CONNECTIONS, 1026, 1256, 1456, 21026, 21256, 21456 TRACTORS & 915 COMBINES
FUEL INJECTION PUMP AND CONNECTIONS, 856, 2856 TRACTORS AND 815 COMBINES
LUBRICATING OIL PUMP
ENGINE OIL COOLER, FILTER, OIL PUMP AND PIPING
TONGUE AND TONGUE HYDRAULIC ASSEMBLIES
TANDEM PUMP HIGH PRESSURE PIPES
HITCH SYSTEM, ROCKSHAFT, POWER ARMS AND PISTONS
HYDRAULIC PUMP
TUBES FOR FRONT SECTION OF TANDEN PUMP
THREE-POINT LINKAGE, 885 AND 885G TRACTORS
THREE-POINT LINKAGE, DUAL CATAGORY
TUBES FOR FRONT SECTION OF TANDEM PUMP
SINGLE RATE SENSING UNIT
FUEL INJECTION PUMP AND CONNECTIONS, 806 AND 2806 TRACTORS W/ENGINE S/N 23979 & AFTER
ROOSA-MASTER INJECTION PUMP CONVERSION KIT, 806 AND 2806 TRACTORS W/ENGINE S/N PRIOR TO 23979
FUEL INJECTION PUMP AND CONNECTIONS, 1206 AND 21206 TRACTORS
SINGLE RATE SENSING UNIT, 1210, 1210G AND 1210Q TRACTORS
LUBRICATING OIL PUMP, 1206 AND 21206 TRACTORS
ENGINE OIL COOLER, FILTER & PUMP PIPING, 806 & 2806 W/ENGINE S/N PRIOR TO 22699
ENGINE OIL COOLER, FILTER & PUMP PIPING, 806 & 2806 W/ENGINE S/N 22699 & AFTER, 1206 & 21206 TRACTOR
BULK FILL - HOSES LT WING 66', MODEL YEAR 2010 AND BEFORE
BULK FILL - HOSES LT WING 66', MODEL YEAR 2011
BULK FILL - HOSES RT WING 66', MODEL YEAR 2010 AND BEFORE
BULK FILL - HOSES RT WING 66', MODEL YEAR 2011
HAY CONDITIONER KIT, 15 FOOT ONLY, HAY CONDITIONER SERIAL NUMBER HC00300 THRU HC00334
SUPPORT FRAMES AND SAFETY STRUTS, 1390 AND 1394 TRACTORS
HAY CONDITIONER KIT, 15 FOOT ONLY, HAY CONDITIONER SERIAL NUMBER HC00400 AND LATER
DOORS FOR DB WEATHERFRAME, 1210 AND 1212 TRACTORS FOR EUROPE ONLY
SIDE FRAMES AND NOSE GUARD
CRANKCASE OIL PAN
MAIN FRAME, LOWER
SEED MODULE HOUSING, CYCLO AIR PLANTERS, ALL EXCEPT CORN/SOYBEAN SPECIAL
MAIN DRIVE
LINKS AND STABILIZER BARS, CATEGORY 1 LINKAGE
SINGLE-RATE SENSING UNIT
WEIGHTS, FRAME, TOW BRACKET, RADIATOR GUARD, TRACTORS WITHOUT CAB
WEIGHTS, FRAME, TOW BRACKET, RADIATOR GUARD, TRACTORS WITH CAB
WEIGHTS, FRAME, TOW BRACKET, RADIATOR GUARD
PLATFORM ATTACHMENT
SEAT ASSEMBLIES
WEIGHTS, FRAME, TOW BRACKET RADIATOR GUARD
REAR FENDERS AND MOUNTINGS, TRACTORS WITHOUT CAB
SEAT AND SUPPORTS
REAR FENDERS AND SEAT SUPPORT, WITHOUT DECK OR CAB, P.I.N. 11189137 AND AFTER
CAB DOORS, 885 AND 885H TRACTORS WITH CLAD DB WEATHERFRAME
CLEANING FAN DRIVE SPEED CONTROL
CLEANING FAN DRIVE SPEED CONTROL, - JJC0100459
CLEANING FAN, DRIVE SPEED CONTROL
CLEANING FAN, DRIVE SPEED CONTROL, TWO PIECE SHIELD
CLEANING FAN, DRIVE SPEED CONTROL, ONE PIECE SHIELD, MODELS W/OUT EXTENDED LENGTH CLEANING SYSTEM
CYLINDER BLOCK ASSEMBLIES, 1190 ALL MODELS
ENGINE, CYLINDER BLOCK, 990, 995, 996, 1210 AND 1212 TRACTORS
ENGINE, CYLNDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS - 885 TRACTORS
ENGINE, CYLINDER BLOCK AND COVERS, 885 TRACTORS
CLUTCH - FOOT CONTROL - 885 TRACTORS
GEARBOX, GEARBOX ASSEMBLIES, [A] 1412, 1412Q, 1412SK, [B] 1412G
GEARBOX, GEARBOX, 1212 TRACTORS
GEARBOX CASE
FINAL DRIVE, FINAL DRIVE REDUCTION CASE AND COVERS
FINAL DRIVES, FINAL DRIVE REDUCTION UNITS, 990, 995 AND 996 TRACTORS, WITH STANDARD REAR AXLE CASE
FINAL DRIVES, FINAL DRIVE REDUCTION UNITS, 1210 AND 1212 TRACTORS
FINAL DRIVES, FINAL DRIVE REDUCTION UNITS
CASE AND COVERS FOR FINAL DRIVES
FINAL DRIVE REDUCTION CASE AND COVERS
SELECTAMATIC HYDRAULIC SYSTEM, HIGH PRESSURE PIPES, TANDEM PUMP
SELECTAMATIC HYDRAULIC SYSTEM, HYDRAULIC PUMP
SELECTAMATIC HYDRAULIC SYSTEM, HIGH PRESSURE PIPES FOR TANDEM PUMP, 1210, 1212 TRACTORS
SELECTAMATIC HYDRAULIC SYSTEM, SINGLE RATE SENSING UNIT
SELECTAMATIC HYDRAULIC SYSTEM, HYDRAULIC PUMP, 885, 990, 995 AND 996 TRACTORS
HYDRAULIC LIFT PUMP - 996, 995, 990 AND 885 TRACTORS
FINAL DRIVE CASE AND COVERS
SELECTAMATIC HYDRAULIC SYSTEM, LIFT RODS AND LOWER LINKS, 885 TRACTORS
SELECTAMATIC HYDRAULIC SYSTEM, LIFT RODS & LOWER LINKS, 885 TRACTORS, W/ DUAL CATEGORY LINKAGE U1504
SELECTAMATIC HYDRAULIC SYSTEM, ADJUSTABLE SENSING UNIT U1155, EARLIER 1212 TRACTORS
SENSING UNIT (NON-ADJUSTABLE) - 885 NARROW TRACTORS
SELECTAMATIC HYDRAULIC SYSTEM, SINGLE RATE SENSING UNIT, 885, 990, 995, 996 AND 1210 TRACTORS
HYDRAULIC PUMP, 1190 ALL MODELS
HYDRAULIC PUMP, 1290 ALL MODELS
PIPES FOR FRONT SECTION OF TANDEM PUMP
LOWER LINKS AND STABILISER BARS
SINGLE-RATE SENSING UNIT, 1190 ALL MODELS
CHASSIS, MAIN FRAME AND REAR AXLE, 885 TRACTORS
LOWER LINKS
CHASSIS, MAIN FRAME AND REAR AXLE, 990, 995 AND 996 TRACTORS
CHASSIS, SUPER COMFORT SUSPENSION SEAT, 990G, 995G, 996G
MAIN FRAME AND REAR AXLE CASE - 885 NARROW TRACTORS
CHASSIS, DOORS, CLAD DB WEATHERFRAME, 990, 995, 996
CHASSIS, BONNET, FENDERS, SAFETY FRAME AND CAB, DOORS DB WEATHERFRAME 1410, 1412
CHASSIS, DOORS - ALL MODELS WITH CLAD DB WEATHERFRAME
MAIN FRAME FRONT AND CLUTCH HOUSING, 1190 ALL MODELS
ELECTRICAL COMPONENTS (CONTINUED)
ELECTRICAL EQUIPMENT, STARTER, SWITCHES, WARNING LAMPS AND REGULATORS, ALL MODELS
ENGINE COVER, SUPPORT FRAME, 1290 FROM P.I.N. 11054202, 1390 FROM P.I.N. 11127049
ENGINE COVER, FRAME, TRACTORS WITH FLAT DECK
ENGINE COVER, SUPPORT FRAME
FRAME, WEIGHTS, TOW BRACKET & RADIATOR GUARD, STANDARD TRACTOR
FRAME, WEIGHT, TOW BRACKET & RADIATOR GUARD UNITS, CAB MODEL

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.