Масленка шкв. моста пер. DS 4кл. TGT8./Mg. 80710

По каталогу Case IH

Название

Шприц-масленка, 1/8” – 27 Dryseal PTF

Название (EN)

LUBE NIPPLE,1/8” – 27 Dryseal PTF

Размеры и исполнение

NIPPLE, LUBE, (Units A and C) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Units B and D) 1/8"-27 x .66 lg| NIPPLE, LUBE, 1/8"-27 x .66 lg| NIPPLE, LUBE, (Stopfen) 1/8"-27 x .66 lg| NIPPLE, LUBE, (In water pump body) (Optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, , Water pump bearing lubricator (Optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, , Water pump shaft lubricator (Optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, (In fan and generator pulley hub) (Optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Schmiernippel) 1/8"-27 x .66 lg| NIPPLE, LUBE, (In water pump body) (optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, (In fan and generator pulley hub) (optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, , All except Komatsu engine 1/8"-27 x .66 lg| NIPPLE, LUBE, , Front engine support lubrication fitting (Will work for Q3673 and 173102) (Optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, , Front engine support, straight, 1/8" (optional with 271409) 1/8"-27 x .66 lg| NIPPLE, LUBE, , Water pump shaft bearing lubricator (Optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Front engine support) (optional with 271409) 1/8"-27 x .66 lg| (Optional with 109461)| NIPPLE, LUBE, (Schmiernippel, oder) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Water pump bearing) (optional with 271409) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Water pump shaft) (optional with 271409) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Optional with 109461) D282501 to 21843 1/8"-27 x .66 lg| Replaces 219-1| LUBRICATOR, 7/16| NIPPLE, LUBE, , Water pump bearing, (Optional) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Not used with pre-packed pumps), or 1/8"-27 x .66 lg| NIPPLE, LUBE, (On adj arm & Pillow Block) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Used on Pillow Block Assy) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Used on Refs. 1 & 8) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Use on Refs. 1 & 8) 1/8"-27 x .66 lg| SNAP RING| NIPPLE, LUBE, (Optional with 109461) 1/8"-27 x .66 lg| (Torque amplifier clutch release shaft) (Optional with 109461) (Note A)| (Clutch release shaft) (Optional with 109461)| NIPPLE, LUBE, (Used on adjusting arm assy, center link assy & pillow block assy only) 1/8"-27 x .66 lg| (Operating handle shaft) (Optional with 109461)| NIPPLE, LUBE, (Optional with 109461) (see note A) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Optional with 109461) (2 for unit A) 1/8"-27 x .66 lg| (Tie rod end) (Optional with 109461)| (Optional with 109461) 9056 up| NIPPLE, LUBE, (Hand operating lever shaft) (optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, , Clutch release sleeve (optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Front axle pivot) (optional with 109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Steering knuckle pivot) (optional with 109461) 1/8"-27 x .66 lg| (Optional with 109461) used on swinging drawbar with lubrication fitting for roller| NIPPLE, LUBE, , Clutch release shaft lubricator (Alemite) (Optional with 109461) 1/8"-27 x .66 lg| (Optional w/109461)| NIPPLE, LUBE, (Optional with 109461) (see note B) 1/8"-27 x .66 lg| Straight, 90°| NIPPLE, LUBE, (A, B, C, D, E and F only) 1/8"-27 x .66 lg| NIPPLE, LUBE, (A, B and D only) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Optional w/109461) 1/8"-27 x .66 lg| NIPPLE, LUBE, , Clutch release shaft, up to B-450F/9326 straight type, 1/8" 1/8"-27 x .66 lg| NIPPLE, LUBE, (A, B, C, D, E, F only) 1/8"-27 x .66 lg| NIPPLE, LUBE, (Inside plates) [B] 1/8"-27 x .66 lg| NIPPLE, LUBE, (Optional with 109461) (A only) 1/8"-27 x .66 lg| FITTING, lubrication, straight, 5/16"| NIPPLE, LUBE, , Optional 1/8"-27 x .66 lg| NIPPLE, LUBE, , NPT Optional 1/8"-27 x .66 lg| Right, 90°| LUBRICATOR, 7/16"| NIPPLE, LUBE, , Pivot pin front axle (Optional) 1/8"-27 x .66 lg| NIPPLE, LUBE, (In 662575R1 idler) 1/8"-27 x .66 lg| NIPPLE, LUBE, , (57-61) 1/8"-27 x .66 lg| NIPPLE, LUBE, , Optional, Used with factory application power assisted steering attachment 1/8"-27 x .66 lg| LUBRICATOR 7/16| LUBRICATOR, 7/16" Opt.| LUBRICATOR, 7/16", Opt.| NIPPLE, LUBE, , Lift rod 1/8"-27 x .66 lg| LUBRICATOR, 7/16" (opt.)| FITTING - grease, 1/4 inch NPT| Lube Fitting 1/8-27 Dryseal PTF| NIPPLE, LUBE, , Optional, For power assisted steering attachment - factory application 1/8"-27 x .66 lg| Fitting| Brake Release

Система техники

PRODUCT FEEDING, FRAME, ENGINE, FRONT AXLE SYSTEM, Drive Train, FRONT AXLE & STEERING, MAIN GEARBOX & DRIVE, PLATFORM, CAB, BODYWORK AND DECALS, Lubrication System, HYDRAULICS, CHASSIS, CHASSIS/ATTACHMENTS, CHASSIS/MOUNTED EQUIPMENT, IMPLEMENT LIFT, MISCELLANEOUS, Options & Miscellaneous, CLUTCH, Rear Frame & Driving Mechanisms, FEEDER, FRONT AXLE, Drawbar & Hitches, Steering Mechanism, ACCESSORIES, WHEELS, COMPLETE MACHINE, MAIN FRAME, ATTACHMENTS/HEADERS, ATTACHMENT, HYDRAULIC SYSTEMS, FRONT LOADER & BUCKET, BOOMS, DIPPERS & BUCKETS, POWER TRAIN, HYDRAULIC SYSTEM, STEERING, CHEMICAL APPLICATORS, SOIL PREPARATION, A - Distribution Systems, Suspension, D - Travel, FRAMES AND BALLASTING, PRESSING - BALE FORMATION, CROP STORAGE/UNLOADING, HITCHES, DRAWBARS & IMPLEMENT COUPLINGS, HANDLING SYSTEM, BRAKES & CONTROLS, SEPARATION

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.