Шайба 895-11008

По каталогу Case IH

Название

Плоская шайба, 9mm ID x 16mm OD x 1.6mm Thk

Название (EN)

WASHER,9mm ID x 16mm OD x 1.6mm Thk

Размеры и исполнение

WASHER, M8 x 16 x 1.6| Hardened| If equipped| (Not Shown)| Build Date 5-11-2000| Model 844XL| If Used| European Models, North American Models| Used on 60XT| Used with Ref. 5, 515-22254| Used with Ref. 14, 515-22254| Low Fenders, without cab| Used with 387443A1, Ref 44| Used with 387443A1, 374476A1| Used With 387443A1, 374476A1| Model 1255XL and 1455XL| Lock| Assy., PTO Rear| If used| flat, 9 x 17 x 2 mm| 90317| flat, 9 x 16 x 1.6 mm| - flat, 9 x 17 x 1.6 mm| - flat, 9 x 17 x 2 mm| flat, 9 x 17 x 1.6 mm| 20333, 5150| - flat, 8 mm| PJ 55| PJ 65-75| to engine M8 x 16 x 1.6| WASHER flat, 9 x 17 x 1.6 mm| flat, 9 x 17 x 1.6 mm, Alternator mounting| - flat, 9 x 17 x 2 mm, Alternator mounting| - flat, 9 x 17 x 1.6 mm, Alternator mounting| - flat, 9 x 16 x 1.6 mm| 90313| - flat, 9 x 16 x 1.6 mm D.B.M.| - flat, 9 x 17 x 1.6 mm, Mechanical drive| WASHER, , Engine clutch, P.I.N. CCJ0028001 and after M8 x 16 x 1.6| (With manual shuttle shift)| flat, 9 x 17 x 1.6 mm, With manual shuttle shift| - flat, 9 x 17 x 1.6 mm, If used| WASHER flat, 9 x 17 x 1.6 mm, Clutch dual gear| - flat, 9 x 17 x 1.6 mm, No longer used, Not required| Replaces 933347R1 washer| Replaces 934675R1 8 x 17 x 2 mm washer used on some models| WASHER - flat, 9 x 17 x 2 mm| 64039 15 Speed| Flat, 9 x 17 x 2 mm| - flat, 9 x 17 x 1.6 mm (Later Tractors)| - flat, 9 x 17 x 1.6 mm, Shift consoles| - flat, 11/32 x 43/64 x 1/16 inch| With cab| Double acting w/ 2 check valves| Carbon Steel| Carbon Steel, New Holland, 140016| flat, 9 x 17 x1.6 mm| Use with 96561C5 M8 x 16 x 1.6| Spring frame to carrier support, 1210 and 1212 tractors (Replaces washer K964793) M8 x 16 x 1.6| Sliding support, Used with 1210G and 1212G tractors (Replaces washer K964793) M8 x 16 x 1.6| Items not valid for cab - For version with lower fenders| Monitor mounting kit| Monitor mounting kits| Monitor kits| Tractors with cab M8 x 16 x 1.6| - flat| - flat, 9 x 17 x 1.6 mm, Tool box| - flat, 9 x 17 x 2 mm (Hydrostatic transmission)| (Replaces washer K964793) M8 x 16 x 1.6| ZND| Models 745, 844 and 845 only| For Version with Cab| WASHER,| WASHER| 9 X 16 X 1.6MM CST ZND| WASHER, 9 X 16 X 1. 6MM CST ZND| WASHER. 9 X 16 X 1.6MM CST ZND| Between Pivot Assy and Cab Frame, Top and Bottom Holes, LH Arm Only| Not Shown| Não ilustrado| WASHER, REPLACED BY 86624184

Система техники

ATTACHMENTS/HEADERS, ENGINE, CAB, COMPLETE MACHINE, FUEL SYSTEM, ELECTRICAL SYSTEMS, PLATFORM, CAB, BODYWORK AND DECALS, STEERING, POWER TRAIN, TRANSMISSION, HYDRAULIC SYSTEMS, BRAKES, BRAKES & CONTROLS, CHASSIS, HYDRAULICS, CHASSIS/ATTACHMENTS, SPRAYING, CAB CLIMATE CONTROL, HITCHES, DRAWBARS & IMPLEMENT COUPLINGS, ACCESSORIES, ROTOR, CONCANVES & SIEVE, GENERAL, IMPLEMENT POWER TAKE OFF, FRAMES AND BALLASTING, SUPERSTRUCTURE, TRACKS & TRACK SUSPENSION, PRODUCT FEEDING, CLEANING, A - Distribution Systems, Mainframe & Functioning Components, C - Power Train, E - Body and Structure, FRONT AXLE SYSTEM, REAR AXLE SYSTEM, CLUTCH

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.