Плоская шайба J923261

По каталогу Case IH

Название

Плоская шайба, 7.2mm ID x 15mm OD x 2.5mm Thk

Название (EN)

WASHER,7.2mm ID x 15mm OD x 2.5mm Thk

Размеры и исполнение

Injector Tip, 2.5 mm| Injector Tip 2.5 mm| SEAL injector nozzle, 2.5 mm thick, 7 mm injector tip| 2,5 mm tip; Not Used In This Application| 2,5 mm tip; See Figure 03-04, Ref 7, 03-07, Ref 3| 2,5 mm; Not Used In This Application| 2,5 mm, See Figure 03-07, 03-11| 2,5 mm| 2.5 mm| 2,5 mm, See Page(s) 3-07| 2.5 mm, Injector Tip| 2.5 mm, Not Used In This Application| 2,5 mm, Not Used In This Application| 2,5 mm tip; See Figure 03-03| Injector Tip, 2,5 mm| 2.5 mm; See Fig 03-04, 03-13| 2.5 mm tip; See Fig 03-05| 2,5 mm, See Figure 3-17| 2.5 mm; Not Used in this Application| Seal - Injector Nozzle, 2.5 MM Thick, 7 MM Injector Tip| Seal, INJ. Tip, 2.5 MM| Seal - Injector Nozzle, 2.5 MM hick, 7 MM Injector Tip| 2.5 mm thick, 7 mm Injector Tip; See Figure 03-12| 2.5 mm; See Figure 03-07| 2.5 mm; See Fig 03-13, 03-14| 2,5 mm, See Figure 03-11| 2.5 mm thick; Injector Nozzle, 7 mm Injector Tip; Use a new seal whenever a nozzle is removed and installed again in the cylinder head| SEAL - injector nozzle, 2.5 mm thick, 7 mm injector tip| SEAL injector nozzle 2.5 mm thick 7 mm injector tip| SEAL, 2.5 mm, see Figure 3-038| SEAL 2.5 mm| SEAL, 2.5 mm| Seal 2,5mm

Система техники

GENERAL & PICTORIAL INDEX, ENGINE, COMPLETE MACHINE, FUEL SYSTEM

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.