RusMarket — запчасти для импортной техники
Шприц-масленка, 90 Degree Elbow, 1/8" - 27 NPTF — фото недоступно

Шприц-масленка, 90 Degree Elbow, 1/8" - 27 NPTF McC219-55

Артикул
McC219-55
Наличие
Под заказ
Предложений
1
Производитель
Case IH
Цена за штуку 782 ₽
Цена с НДС

актуально на момент последнего обновления каталога

Введите нужное количество и нажмите «Уточнить наличие» — цена и сроки поставки обновятся.

Итого за 1 шт. 782 ₽
Купить

Доступные предложения

Склад Уфа 782 ₽ Остаток по запросу: 0 шт.
Нет в наличии

По каталогу Case IH

Название
Шприц-масленка, 90 Degree Elbow, 1/8" - 27 NPTF
Название (EN)
LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF
Номер в каталоге
219-55
Размеры и исполнение
NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg| For Ref. 4, models 743XL and 745XL| For Ref. 2| NIPPLE, LUBE, , Grain bin auger 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Lincoln 90º, 1/8" NPT x .84" lg| No Longer Used; Order 219-1, Ref 17A| Special short| No Longer Used, Order 219-1, Ref 17A| Used with Ref 4 or 5| Special short, Self-leveling arm| NIPPLE, LUBE, , Lincoln #5400 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (730 Grove), Mechanical steering drag link 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Lower 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Used w/& w/o P.T.O.) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Used w/o P.T.O.) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Short 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Graisseur coude 90° du roulement exterieur d'essieu arriere (interchangeable avec 755017R91 et 755018R91) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Grove only), drag link 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Used on G100925 only 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Used with and without PTO) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , If equipped 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Rear) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , If used 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Intermediate to rear axle 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Rows 2 and 3) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Row 4) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Row 2) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, (Rows 3 and 4) 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Lincoln #5000, front axle and radius rod, S/N 8172001 and after 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Lincoln #5000 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Used on models with foot operated loader controls 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , 3 point hitch rockershaft, P.I.N. JEE0069308 and after 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , 3 point hitch rockershaft, P.I.N. JEE0069308 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , P.I.N. JEE0071001 and after 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Special short 90º, 1/8" NPT x .84" lg| NIPPLE, LUBE, , Used with Ref. 4 or 5 coupler only, 90° 90º, 1/8" NPT x .84" lg
Система техники
HYDRAULIC SYSTEMS, ATTACHMENTS/HEADERS, COMPLETE MACHINE, PRODUCT FEEDING, PRESSING - BALE FORMATION, TRACKS/STEERING, MISCELLANEOUS, POWER TRAIN, CHASSIS, CROP STORAGE/UNLOADING, HYDRAULICS, CHASSIS/ATTACHMENTS, CHASSIS/MOUNTED EQUIPMENT, THRESHING, PICKING SYSTEM, FRONT LOADER & BUCKET, STEERING, BRAKES, SEPARATION, MAIN FRAME, REEL, KNOTTER /WRAPPER, Drive Train, PLATFORM, CAB, BODYWORK AND DECALS, FRAMES AND BALLASTING, FEEDER, Hydraulic Components & Circuits, HITCHES, DRAWBARS & IMPLEMENT COUPLINGS

Применяется на технике

Ещё 163

Сборочные узлы

  • LIFT CYLINDER, STARTING FROM NO. 3755971
  • LIFT CYLINDER
  • UPPER FEED RAKE SHAFT
  • FEEDER SPOUT
  • POWER LIFT
Ещё 279
  • UPPER FEED RAKE SHAFT, FEED RAKE ANTI WRAP SHIELD
  • PLUNGER
  • CONTROLS - FORWARD AND REVERSE
  • DOUBLE CLUTCH
  • CLUTCH HOUSING
  • FRONT AXLE, GENERAL PURPOSE MODELS, 53" TO 73" AND 60" TO 88", FIRST USED TRACTOR SER. NO. 8332878
  • FEEDER SPOUT, NUMBER 8311400 AND AFTER
  • TAIL WHEEL ASSEMBLY
  • FRONT AXLE, WESTERN MODELS, 60 INCH TO 88 INCH, FIRST USED TRACTOR SERIAL NUMBER 8332878
  • FRONT AXLE, WESTERN MODELS, 55 INCH TO 80 INCH, USED PRIOR TO TRACTOR SERIAL NUMBER 8332878
  • FEED RAKE UPPER SHAFT
  • GRAIN BIN AUGER
  • FRONT WHEEL SPINDLE
  • CYLINDER - LOADER LIFT
  • CYLINDER - LOADER BUCKET
  • CYLINDER - LOADER BUCKET (NOV 14 2011 2:09PM)
  • CYLINDER - LOADER BUCKET (NOV 5 2011 11:51AM)
  • LOADER CONTROLS
  • G109777 LOADER LIFT CYLINDER
  • G34926 LOADER BUCKET CYLINDER
  • AUXILIARY CONTROL VALVE - PEDAL MOUNTING, MODELS WITH FOOT OPERATED LOADER CONTROLS
  • CYLINDER LOADER LIFT
  • LOADER BUCKET CYLINDER
  • MOUNTING - VALVE, AUXILIARY CONTROL
  • CYLINDER LOADER BUCKET
  • CYLINDER ASSY - LOADER LIFT
  • CYLINDER ASSY - LOADER BUCKET TILT
  • CYLINDER ASSY - LOADER BUCKET
  • CYLINDER ASSY - BOOM, DIPPER, AND BUCKET (D100)
  • CYLINDER ASSY - BOOM, DIPPER, AND BUCKET, D100, D100XR
  • CYLINDER ASSY - BACKHOE (NORTH AMERICA), D100, D100XR
  • FRONT AXLE AND SUPPORTS, TIE RODS
  • ADJUSTABLE FRONT AXLE, GENERAL PURPOSE MODELS, FIRST USED TRACTOR SERIAL NUMBER 8339078
  • ADJUSTABLE FRONT AXLE, GENERAL PURPOSE MODELS, USED TRACTOR SERIAL NUMBERS 8300290 THRU 8339077
  • ADJUSTABLE FRONT AXLE, GENERAL PURPOSE MODELS, USED PRIOR TO TRACTOR SERIAL NUMBER 8300290
  • ADJUSTABLE FRONT AXLE, WESTERN MODELS, FIRST USED TRACTOR SERIAL NUMBER 8339078
  • ADJUSTABLE FRONT AXLE, WESTERN MODELS, USED PRIOR TO TRACTOR SERIAL NUMBER 8339078
  • ROCKSHAFT
  • CASE COUPLER - INLINE LEVER, - JAF0041367
  • KNIFE ASSEMBLY
  • CASE COUPLER
  • LOADER LIFT FRAME
  • CLAM BUCKET
  • BRAKE CONTROLS, FIRST USED TRACTOR SERIAL NUMBER 8282440
  • VARIABLE SPEED CYLINDER DRIVE, BELT TAKE UP ASSEMBLY
  • 4-IN-1 BUCKET
  • DRUM SUPPORT ASSY
  • DRUM SUPPORT ASSEMBLY - 6 ROW WIDE AND 4 ROW WIDE
  • DRUM SUPPORT ASSY - 6 ROW WIDE AND 4 ROW WIDE
  • DRUM SUPPORT ASSEMBLY - 6 ROW NARROW
  • DRUM SUPPORT ASSY - 5 ROW NARROW
  • DRUM SUPPORT ASSY - 4 ROW NARROW AND 5 ROW NARROW
  • DRUM SUPPORT ASSY - 4 ROW WIDE
  • DRUM SUPPORT ASSY - 6 ROW NARROW
  • DRUM SUPPORT ASSY - 5 ROW WIDE
  • FRONT AXLE AND RADIUS ROD
  • STEERING CYLINDER
  • STEERING GEAR, MECHANICAL OR POWER, 4 WHEEL, WESTERN, 730 GROVE
  • G100295 LOADER LIFT CYLINDER
  • STRAWWALKER
  • STRAWWALKER AND DRIVE
  • ADJUSTABLE FRONT AXLE, GENERAL PURPOSE, 53" TO 73" AND 60" TO 88" TREAD, 1ST USED TRAC. S/8332878
  • ADJUSTABLE FRONT AXLE, GEN. PURPOSE, 48" TO 73" & 53" TO 82" TREAD, USED PRIOR TO TRAC. S/N 8332878
  • ADJUSTABLE FRONT AXLE, HIGH CLEARANCE
  • FRONT AXLE AND TIE ROD, 4 WHEEL AND WESTERN
  • RADIUS ROD, 4 WHEEL AND WESTERN
  • STEP, FLIP-UP
  • FRONT AXLE AND TIE RODS, 730 GROVE
  • REEL DRIVE
  • T40203 LIFT CYLINDER
  • CLUTCH HOUSING AND CONTROLS, 730 GROVE
  • REAR STEERING CYLINDER AND TUBES
  • TWINE ARM PIVOT, FRANCE, PRIOR TO P.I.N. HBJ039346
  • A77054 REAR HYDRAULIC STEER
  • REAR AXLE TRUNNION AND PIVOT
  • REAR HYDRAULIC STEERING, CONT'D
  • G34864 LOADER LIFT CYLINDER
  • G103407 BUCKET TILT CYLINDER
  • PTO CLUTCH THROWOUT
  • G103407 LOADER BUCHKET CYLINDER
  • REAR AXLE & DIFFERENTIAL
  • CONTROLS, FORWARD AND REVERSE
  • FRAME DRAWBAR AND ATTACHING PARTS
  • STEERING GEAR, MECHANICAL STD. FOUR WHEEL, DRAG LINK
  • BRAKE LINES , 744/844/844S, IF SO EQUIPPED
  • HAND BRAKE
  • SINGLE CLUTCH 844/844S
  • FRONT AXLE, ADJUSTABLE 53" TO 82"
  • G100295 AND G34917 LOADER LIFT CYLINDER
  • FRONT AXLE, ADJUSTABLE 48" TO 73"
  • FRONT AXLE, ADJUSTABLE 41" TO 62"
  • G34926 BUCKET DUMP CYLINDER
  • REAR AXLE PIVOT TRUNNION
  • FRONT AXLE, HIGH CLEARANCE
  • 3 POINT HITCH, DRAWBAR & SUPPORT
  • FRONT AXLE, STANDARD FOUR WHEEL TRACTOR
  • FRONT AXLE, TIE RODS, MODEL 730 GROVE
  • 4-IN-1 LOADER BUCKET
  • GEAR SHIFT, MODEL 730 GROVE
  • 430 STANDARD UTILITY FRONT AXLE, PRIOR TO S/N 8262800
  • CLUTCH CONTROLS, STANDARD CLUTCH DRIVE, CLUTCH HOUSING
  • CLUTCH HOUSING AND CONTROLS, STANDARD CLUTCH DRIVE, 730 GROVE
  • DRAWBAR AND SUPPORTS, WITH HITCH
  • P.T.O CONTROL LINKAGE
  • DRAWBAR AND SUPPORTS, WITHOUT HITCH
  • CONTROLS, FORWARD AND REVERSE, USED BEFORE TRACTOR SERIAL NO. 9821352
  • BOOM LIFT LINK, 80'/90' BOOM
  • DRAWBAR AND SUPPORTS, WITH AND WITHOUT P.T.O.
  • CONTROLS, FORWARD AND REVERSE, USED TRACTOR SERIAL NO. 9821352 THRU 9826659
  • CONTROLS, FORWARD AND REVERSE, USED TRACTOR SERIAL NO. 9826660 AND AFTER
  • THREE POINT HITCH, WITH AND WITHOUT THREE POINT HITCH
  • FRONT AXLE AND SUPPORT
  • SWAYBAR, PITMAN ASSEMBLY, LEFT, ALL HEADER LENGTHS, SERIAL NUMBER CFH0050001 THRU CFH0050871
  • ADJUSTABLE FRONT AXLES AND SUPPORT
  • MFD FRONT AXLE AND SUPPORT
  • STEERING CYLINDER, USED WITH 9240 AND 9260 TRACTORS
  • FRONT AXLE SUPPORT, TWO WHEEL DRIVE
  • SWAYBAR, PITMAN ASSEMBLY, RIGHT, ALL HEADER LENGTHS, SERIAL NUMBER CFH0050001 THRU CFH0050871
  • FRONT AXLE SUPPORT, MFD TRACTOR
  • SWAYBAR, PITMAN ASSEMBLY, LEFT, HEAVY DUTY, 700130795 SWAYBAR COMPLETE, LEFT
  • SWAYBAR, PITMAN ASSEMBLY, RIGHT, HEAVY DUTY, 700130796 SWAYBAR ASSEMBLY COMPLETE, RIGHT
  • PLUNGER ASSEMBLY
  • ADJUSTABLE FRONT AXLE AND SUPPORT, WITH STANDARD WHEEL BASE
  • ADJUSTABLE FRONT AXLE AND SUPPORT, WITH 108 INCH (2743 MM) WHEEL BASE
  • FRONT AXLE AND SUPPORT, MFD TRACTORS
  • REAR STEERING HYDRAULICS, CHECK VALVE AND CYLINDERS
  • ADJUSTABLE FRONT AXLE, STANDARD AND LONG AXLE WITH STANDARD WHEEL BASE
  • ADJUSTABLE FRONT AXLE, STANDARD AND LONG AXLE WITH 110 INCH (2794 MM) WHEEL BASE
  • FRONT AXLE AND SUPPORT, ZF AXLE
  • REAR STEERING HYDRAULICS CHECK VALVE AND CYLINDERS
  • REAR STEER HYDRAULICS, CHECK VALVE AND CYLINDERS
  • ADJUSTABLE FRONT AXLE, STANDARD AND LONG AXLE WITH 110 INCH (2794MM) WHEEL BASE
  • FRONT AXLE AND PIVOT, STANDARD 104 INCH WHEEL BASE
  • REAR STEERING HYDRAULICS, CYLINDERS AND CHECK VALVE
  • FRONT AXLE AND SUPPORT, MFD TRACTORS, ZF AXLE
  • REAR STEERING HYDRAULICS, CHECK VALVE AND CYLINDERS, PRIOR TO PIN 8858086
  • STEERING CYLINDER, 4 INCH (102 MM) DIAMETER X 7-29/32 INCH (201 MM) STROKE
  • REAR STEERING HYDRAULICS, CHECK VALVE AND CYLINDERS, P.I.N. 8858086 & AFTER
  • FRONT AXLE AND PIVOT, LONG 118 INCH WHEEL BASE
  • STEERING KNUCKLE AND TIE RODS
  • ADJUSTABLE FRONT AXLE, PRIOR TO P.I.N. 9905863
  • ADJUSTABLE FRONT AXLE, STD. & LONG AXLE W/ STD. WHEEL BASE, W/ 22-29/32" LONG (582MM) AXLE PIVOT PIN
  • ADJUSTABLE FRONT AXLE, STD. & LONG AXLE W/ STD. WHEEL BASE, W/ 23-1/4" LONG (591MM) AXLE PIVOT PIN
  • ADJUSTABLE FRONT AXLE, STANDARD & LONG AXLE W/110" (2 794MM) WHEEL BASE, W/ SPLIT TYPE PIVOT BUSHING
  • ADJUSTABLE FRONT AXLE, STD. & LONG AXLE W/ 110" (2 794MM) WHEEL BASE, W/ SOLID TYPE PIVOT BUSHING
  • ADJ. FRONT AXLE, STANDARD & LONG AXLE W/ 110" (2794 MM) WHEEL BASE, W/ SPLIT TYPE PIVOT BUSHING
  • ADJ. FRONT AXLE, STANDARD & LONG AXLE W/ 110" (2794 MM) WHEEL BASE, W/ SOLID TYPE PIVOT BUSHING
  • FOUR WHEEL DRIVE FRONT AXLE AND SUPPORT
  • DRIVE SHAFT ASSEMBLIES
  • DRIVE SHAFT, ENGINE TO TRANSMISSION, 9250 TRACTOR
  • DRIVE SHAFT, ENGINE TO TRANSMISSION, 9250 ROW CROP SPECIAL TRACTOR
  • DRIVE SHAFT, POWER SHIFT TRANSMISSION TRACTOR, EXCEPT ROW CROP SPECIAL
  • DRIVE SHAFT, ROW CROP SPECIAL TRACTOR
  • DRIVE SHAFT, SYNCHROSHIFT TRANSMISSION TRACTOR
  • DRUM SUPPORT ASSEMBLY, 6 ROW WIDE, BSN YHT02180
  • DRUM SUPPORT ASSY - 6 ROW WIDE
  • DRUM SUPPORT ASSEMBLY, 6 ROW NARROW, BSN YHT021800
  • STALK ROLL ADJUSTING CONTROLS, ROWS 2, 3 AND 4
  • TRANSMISSION BRAKE
  • FRONT AXLE AND RADIUS ROD, PAGE 92
  • FRONT AXLE AND RADIUS ROD SERIAL NUMBER 8172001 AND AFTER
  • G106818 LOADER LIFT CYLINDER
  • G103407 LOADER BUCKET CYLINDER
  • BUCKET TILT CYLINDER
  • LOADER LIFT CYLINDER
  • AUXILIARY CONTROL VALVE & CONTROL MOUNTING, FOR HAND OPER LOADER CONTR., FOR FOOT OPER LOADER CONTRL
  • LOADER LIFT CYLINDER P/N D136838
  • LOADER LIFT CYLINDER D136838, PRIOR TO P.I.N. JAF0096313
  • BUCKET TILT CYLINDER P/N D136128
  • BUCKET TILT CYLINDER D136128, PRIOR TO P.I.N. JAF0096313
  • BOOM DIPPER & BUCKET CYLINDERS
  • AUXILIARY CONTROL VALVE AND LINKAGE USED ON MODELS WITH FOOT OPERATED LOADER CONTROLS
  • LOADER LIFT CYLINDER USED ON MODELS PRIOR TO P.I.N. JAF0130838
  • LOADER LIFT CYLINDER, P.I.N. JAF0130838 AND AFTER
  • LOADER BUCKET TILT CYLINDER, PRIOR TO P.I.N. JAF0130838
  • HYDRAULIC CYLINDER (ELEVATOR SLEW)
  • HITCH ROCKERSHAFT, PRIOR TO P.I.N. JCB0028400
  • HITCH ROCKERSHAFT, P.I.N. JCB0028400 AND AFTER
  • HITCH ROCKERSHAFT
  • HITCH LOWER LINK, MOUNTS AND DRAWBAR, PRIOR TO P.I.N. JEE0071001
  • HITCH LOWER LINK, MOUNTS AND DRAWBAR, S/N JEE0071001 & AFTER
  • THREE POINT HITCH ROCKERSHAFTS, PRIOR TO P.I.N. JEE0069308, 9370 AND 9380 ONLY
  • THREE POINT HITCH ROCKERSHAFTS
  • 6 BAT REEL, 52 INCH REEL WITH STEEL TINES, HART CARTER
  • CENTER LINK
  • REAR FRAME PRIOR TO P.I.N. JCB0028400
  • REAR FRAME P.I.N. JCB0028400 & AFTER
  • FRAME CONNECTING LINK AND KING PIN
  • FRAME CONNECTING LINK AND KING PINS
  • REAR FRAME
  • FRAME CONNECTING LINK AND KING PINS, 9240 AND 9260 TRACTOR
  • FRAME CONNECTING LINK AND KING PINS, 9250 TRACTOR
  • FRAME CONNECTING LINK
  • FRAME CONNECTING LINK AND KING PINS, 9250 & 9250 ROW CROP SPECIAL TRACTOR
  • HITCH COMPONENTS
  • 49 INCH (1245 MM) WIDE 4-IN-1 BUCKET
  • CENTER HINGE
  • CASE COUPLER, PRIOR TO P.I.N. JAF0183047
  • DRAWBAR AND SUPPORTS, PRIOR TO P.I.N. 8860450
  • DRAWBAR AND SUPPORTS, P.I.N. 8860450 AND AFTER
  • DRAWBAR AND SUPPORTS, PRIOR TO P.I.N. 8865846
  • DRAWBAR AND SUPPORTS, P.I.N. 8865846 AND AFTER
  • DRAWBAR AND SUPPORTS, WITH HITCH, PRIOR TO P.I.N. 8860450
  • DRAWBAR AND SUPPORTS, WITH HITCH, P.I.N. 8860450 AND AFTER
  • DRAWBAR AND SUPPORTS
  • 6 BAT REEL, STEEL TINES OR REAR MOUNTED PLASTIC TINES
  • HEADER MOUNTING
  • DRUM LIFT ARM, 2022 COTTON PICKER
  • DRUM LIFT ARM, 2044 COTTON PICKER
  • DRUM HANGER ASSEMBLY, 5 ROW NARROW
  • DRUM HANGER ASSEMBLY, 5 ROW NARROW, PRIOR TO P.I.N. JJC0155439
  • DRUM HANGER ASSEMBLY, 5 ROW NARROW, P.I.N. JJC0155439 AND AFTER
  • DRUM HANGER ASSEMBLY, 5 ROW WIDE
  • DRUM HANGER ASSEMBLY, 4 ROW WIDE, PRIOR TO P.I.N. JJC0155439
  • DRUM HANGER ASSEMBLY, 4 ROW WIDE, P.I.N. JJC0155439 AND AFTER
  • DRUM HANGER ASSEMBLY, 4 ROW WIDE
  • KNIFE DRIVE BOX
  • Hydraulic Cylinder {Elevator Slew}
  • HYDRAULIC CYLINDER {Elevator Slew}
  • ROCKSHAFT ASSY; (VAR) 5NP08ZZ07, 5NP08ZZ08, 5NS08ZZ07, 5NS08ZZ08, 5SP08ZZ07, 5SP08ZZ08, 5SQ08ZZ07, 5SQ08ZZ08, 5SS08ZZ07, 5SS08ZZ08, 5ST08ZZ07, 5ST08ZZ08
  • ROCKSHAFT ASSY; (VAR) 5NU08ZZ07, 5NU08ZZ08, 5NW08ZZ07, 5NW08ZZ08, 5SU08ZZ07, 5SU08ZZ08, 5SV08ZZ07, 5SV08ZZ08, 5SW08ZZ07, 5SW08ZZ08, 5SX08ZZ07, 5SX08ZZ08
  • BOOM LIFT, PARALLEL LINKAGE, 80'/90' BOOM - (S/N Range) after YGT044001; (VAR) S22508PB, S22508PD, S22508PG, S22508PH, S22508PJ, S22508PL, S22508RB, S22508RC, S22508RD, S22508RF, S22508RG, S22508RH, S22508SB, S22508SD, S22508SG, S22508SH, S22508SJ, S22508SL, S22508TB, S22508TC, S22508TD, S22508TF, S22508TG, S22508TH
  • BOOM LIFT, PARALLEL LINKAGE, 80' / 90', BOOM - (S/N Range) before YGT044001; (VAR) S22508LB, S22508LD, S22508LG, S22508LH, S22508MB, S22508MF, S22508NB, S22508ND, S22508NG, S22508NH, S22508NJ, S22508NL
  • HANGER BRACKET NO. 1 - 6 ROW WIDE, ASN YHT021801
  • HANGER BRACKET NO. 2 - 6 ROW WIDE, ASN YHT021801
  • HANGER BRACKET NO. 3 - 6 ROW WIDE, ASN YHT021801
  • HANGER BRACKET NO. 4 - 6 ROW WIDE, ASN YHT021801
  • HANGER BRACKET NO. 5 - 6 ROW WIDE, ASN YHT021801
  • HANGER BRACKET NO. 6 - 6 ROW WIDE, ASN YHT021801
  • HANGER BRACKET NO. 1 - 5 AND 6 ROW NARROW, ASN YHT021801
  • HANGER BRACKET NO. 2 - 5 AND 6 ROW NARROW, ASN YHT021801
  • HANGER BRACKET NO. 3 - 5 AND 6 ROW NARROW, ASN YHT021801
  • HANGER BRACKET NO. 4 - 5 AND 6 ROW NARROW, ASN YHT021801
  • HANGER BRACKET NO. 5 - 5 ROW NARROW, ASN YHT021801
  • HANGER BRACKET NO. 5 - 6 ROW NARROW, ASN YHT021801
  • HANGER BRACKET NO. 1 - 6 ROW WIDE, ASN YHT021001
  • HANGER BRACKET NO. 2 - 6 ROW WIDE, ASN YHT021001
  • HANGER BRACKET NO. 3 - 6 ROW WIDE, ASN YHT021001
  • HANGER BRACKET NO. 4 - 6 ROW WIDE, ASN YHT021001
  • HANGER BRACKET NO. 5 - 6 ROW WIDE, ASN YHT021001
  • HANGER BRACKET NO. 6 - 6 ROW WIDE, ASN YHT021001
  • HANGER BRACKET NO. 1 - 5 AND 6 ROW NARROW, ASN YHT021001
  • HANGER BRACKET NO. 2 - 5 AND 6 ROW NARROW, ASN YHT021001
  • HANGER BRACKET NO. 3 - 5 AND 6 ROW NARROW, ASN YHT021001
  • HANGER BRACKET NO. 4 - 5 AND 6 ROW NARROW, ASN YHT021001
  • HANGER BRACKET NO. 5 - 6 ROW NARROW, ASN YHT021001
  • HANGER BRACKET NO. 5 - 5 ROW NARROW, ASN YHT021001
  • HANGER BRACKET NO. 1 - 6 ROW WIDE, ASN YHT021501
  • HANGER BRACKET NO. 2 - 6 ROW WIDE, ASN YHT021501
  • HANGER BRACKET NO. 3 - 6 ROW WIDE, ASN YHT021501
  • HANGER BRACKET NO. 4 - 6 ROW WIDE, ASN YHT021501
  • HANGER BRACKET NO. 5 - 6 ROW WIDE, ASN YHT021501
  • HANGER BRACKET NO. 6 - 6 ROW WIDE, ASN YHT021501
  • HANGER BRACKET NO. 1 - 5 AND 6 ROW NARROW, ASN YHT021501
  • HANGER BRACKET NO. 2 - 5 AND 6 ROW NARROW, ASN YHT021501
  • HANGER BRACKET NO. 3 - 5 AND 6 ROW NARROW, ASN YHT021501
  • HANGER BRACKET NO. 4 - 5 AND 6 ROW NARROW, ASN YHT021501
  • HANGER BRACKET NO. 5 - 5 ROW NARROW, ASN YHT021501
  • HANGER BRACKET NO. 5 - 6 ROW NARROW, ASN YHT021501
  • ROCKSHAFT ASSY; (VAR) 5NP08ZZ07, 5NP08ZZ08, 5NS08ZZ07, 5NS08ZZ08, 5SP08ZZ07, 5SP08ZZ08, 5SS08ZZ07, 5SS08ZZ08, 5ST08ZZ07, 5ST08ZZ08
  • HYDRAULIC CYLINDER (ELEVATOR SLEW); (Prod Date) after 01-OCT-2017; (VAR) 421202027, 421203027, 421994027, 462480017
  • HANGER BRACKET NO. 1 - 6 ROW WIDE,
  • HANGER BRACKET NO. 2 - 6 ROW WIDE,
  • HANGER BRACKET NO. 3 - 6 ROW WIDE,
  • HANGER BRACKET NO. 4 - 6 ROW WIDE,
  • HANGER BRACKET NO. 5 - 6 ROW WIDE,
  • HANGER BRACKET NO. 6 - 6 ROW WIDE,
  • DRUM SUPPORT ASSEMBLY, 6 ROW NARROW,
  • HANGER BRACKET NO. 1 - 5 AND 6 ROW NARROW,
  • HANGER BRACKET NO. 2 - 5 AND 6 ROW NARROW,
  • HANGER BRACKET NO. 3 - 5 AND 6 ROW NARROW,
  • HANGER BRACKET NO. 4 - 5 AND 6 ROW NARROW,
  • HANGER BRACKET NO. 5 - 6 ROW NARROW
  • HANGER BRACKET NO. 5 - 5 ROW NARROW
  • DRUM SUPPORT ASSEMBLY, 6 ROW WIDE,
  • ARTICULATION, BOOM SECTION; (Prod Date) after 01-JAN-2015; (VAR) 462300097
  • ROCKSHAFT ASSY; (VAR) 5NP08ZZ07, 5NP08ZZ08, 5NP08ZZA07, 5NP08ZZA08, 5NP08ZZD07, 5NP08ZZD08, 5NS08ZZ07, 5NS08ZZ08, 5NS08ZZA07, 5NS08ZZA08, 5NS08ZZD07, 5NS08ZZD08, 5SP08ZZ07, 5SP08ZZ08, 5SP08ZZA07, 5SP08ZZA08, 5SP08ZZD07, 5SP08ZZD08, 5SS08ZZ07, 5SS08ZZ08, 5SS08ZZA07, 5SS08ZZA08, 5SS08ZZD07, 5SS08ZZD08, 5ST08ZZ07, 5ST08ZZ08, 5ST08ZZA07, 5ST08ZZA08, 5ST08ZZD07, 5ST08ZZD08
  • ROCKSHAFT ASSY; (VAR) 5C08DB140, 5NU08ZZ07, 5NU08ZZ08, 5NU08ZZA07, 5NU08ZZA08, 5NU08ZZD07, 5NU08ZZD08, 5NW08ZZ07, 5NW08ZZ08, 5NW08ZZA07, 5NW08ZZA08, 5NW08ZZD07, 5NW08ZZD08, 5SN08GG01, 5SN08GG02, 5SN08LL01, 5SN08LL02, 5SU08ZZ07, 5SU08ZZ08, 5SU08ZZA07, 5SU08ZZA08, 5SU08ZZD07, 5SU08ZZD08, 5SV08ZZ07, 5SV08ZZ08, 5SV08ZZA07, 5SV08ZZA08, 5SV08ZZD07, 5SV08ZZD08, 5SW08ZZ07, 5SW08ZZ08, 5SW08ZZA07, 5SW08ZZA08, 5SW08ZZD07, 5SW08ZZD08, 5SX08ZZ07, 5SX08ZZ08, 5SX08ZZA07, 5SX08ZZA08, 5SX08ZZD07, 5SX08ZZD08
  • HYDRAULIC CYLINDER (ELEVATOR SLEW); (Prod Date) after 01-JAN-2020; (VAR) 462650027

Заменён на

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.

Похожие детали

McC219033 — FLANGE
McC219033
FLANGE
30 569 ₽
 McC219034 — Фонарь
McC219034
Фонарь
207 328 ₽
 McC219043 — Винт
McC219043
Винт
704 ₽
 McC219045 — UNION
McC219045
UNION
2 157 ₽
 McC219057 — NUT
McC219057
NUT
134 ₽
 McC219058 — Гидравлический насос
McC219058
Гидравлический насос
2 116 ₽
 McC219061 — HOSE
McC219061
HOSE
2 194 ₽
 McC219062 — HOSE
McC219062
HOSE
2 753 ₽