Гайка, 3/4"-10, G5 McC425-1012

Артикул: McC425-1012
Наличие: Под заказ
Предложений: 1
Производитель: Case IH

Цена за штуку 661 ₽

Цена с НДС

актуально на момент последнего обновления каталога

Кол-во

Введите нужное количество и нажмите «Уточнить наличие» — цена и сроки поставки обновятся.

Итого за 1 шт. 661 ₽

Купить

Доступные предложения

Склад Уфа 661 ₽ Остаток по запросу: 0 шт.

Нет в наличии

По каталогу Case IH

Название: Гайка, 3/4"-10, G5
Название (EN): NUT,3/4"-10, G5
Номер в каталоге: 425-1012
Размеры и исполнение: 3/4-10 HEX| 3/4-10 HEX - LOWER FRAME TO AXLE CARRIER| 3/4-10 H| HEX. 19.05 MM| 3/4 hex| HEX., 3/8 UNC -W/651793 R2-| 3/4-10 hex| hex, 1/12 inch NC| - hex, 3/4 inch NC| 3/4-10 hex.| 3/4 pln type 5| 3/4 HEX| 3/4-10 hex, tractors with three point hitch| - hex, 3/4 inch NC, if used| 3/4 hex, 2 for units A and B| hex., 3/4"| Frame to Fenders| 3/4-10 HEX -LOWER FRAME TO AXLE CARRIER-, NOT ILLUSTRATED| 3/4-10 HEX, FRAME TO FENDERS| 3/4-10 HEX - LOWER FRAME TO AXLE CARRIER - THE FOLLOWING PARTS ARE NOT ILLUSTRATED| 3/4-10 hex, top frame to fender, not illustrated| 3/4-10 HEX, TOP FRAME TO FENDER| 3/4-10 HEX, ORDER FRAME 3113680R91, 454/8760-100569, 2400/0734-100081| 3/4"| E.H. 19.05 mm| hex., 3/4-10 NC| FOLLOWS REFERENCE NO. 37| hex., 3/4-10NC (see note A)| B| hex., 3/8-10NC| (Ecrou hexagonal 19.04 mm gros filet (NC)) 3/4"-10, G5| HEX NUT, 3/4" N.C.| (Ecrou hexagonal 19 mm gros filet (NC)) 3/4"-10, G5| hex., 3/4-10NC| 3/4-10 hex, 4 for fourth, fifth & sixth weights| hex., 3/4-10NC (B only)| - hex, 1/2 inch NC (Replaces nut 120378)| HEX NUT, 7/8" N.C.| hex., 3/4-10NC, drawbar and yoke| hex., 3/4-10 NC (A only)| hex., 3/4-10 NC (see note)| hex., 3/4-10NC [B]| hex., 3/4-10NC [A]| hex., 3/4-10NC (note A)(A, B, C, D only)| hex., 3/4-10NC (E, F, G only)| NC, Hex.| NC Hex.| Hex., NC| Hex| Hex., ZND| NC, ZND| hex., 3/4-10NC (see note B)| - hex, 3/4 inch NC (Replaces nut 220086)| hex| hexagonal, 3/4"| UNC 3/4"-10, G5| UNC, U593 (911153) 3/4"-10, G5| 3/8 UNC, U593 (911153)| hex hd. 3/4"| HEX 3/4| hex. 3/4"| hex 3/4"| - hex, 3/4 inch NC, 38 or 42 inch wheels (2nd or 3rd position)| - hex, 3/4 inch NC, 38 or 42" wheels (1st position)| - hex, 3/4 inch NC, 38 or 42" wheels (2nd or 3rd position)| - hex, 3/4 inch UNC| hex, 3/4 inch NC| 3/4 hex.| hex, 3/4"| 3/4-10| Hex.| Jam| Drawbar support to hitch plates (Replaces nut K607049) 3/4"-10, G5| - hex, 3/4 inch NC, with pto| (Replaces nut K607049) 3/4"-10, G5| - hex, 3/4 inch NC, grade 5| - hex, 3/4 inch NC, with PTO| Used with 885G and 885N tractors (Replaces nut K607049) 3/4"-10, G5| Used with 885Q, 885QH, 885Sk, 885 and 885H tractors (Replaces nut K607049) 3/4"-10, G5| - hex, 3/4 inch NC, rear weights| (3 used on 12 foot) 3/4"-10, G5| Rear| Front| - hex, 3/4 inch NC (See Note A)| Grapple attachment 3/4"-10, G5| hex, 3/4 inch NC, plated| - hex, 3/4 inch NC, pump mounting attachment| hex, 3/4 inch NC, Grapple attachment| hex, 3/4 inch NC.| - 3/4 inch UNC, special| - hex, 3/4 inch NC, 3/4 inch UNC| NUT - hex, 3/4 inch NC| - hex, 3/4 inch NC (Used on planters with fertilizer attachment)| (See Note B) 3/4"-10, G5| - hex, 3/4 inch NC (See Note B)| (Used on planters with fertilizer attachment) 3/4"-10, G5| 3/4 -10 hex.| 3/4-10 hex, w/adjustable lights| 3/4 in.| 3/4| 3/4" NUT| - hex: .75 NC Gr6 ZP| (Order 425-1012) 3/4"-10, G5| 3/7 hex.| hex, 3/4"-10| 3/4-10 hex, steel rear wheels
Система техники: FRAMES AND BALLASTING, MAIN GEARBOX & DRIVE, PRESSING - BALE FORMATION, SUPERSTRUCTURE, ATTACHMENTS/HEADERS, Driveline, PLATFORM, CAB, BODYWORK AND DECALS, EJECTION, ENGINE, Pickup, Propulsion, HYDRAULIC SYSTEMS, STEERING, BALE CHAMBER, POWER TRAIN, MAIN FRAME, Drive Train, CHASSIS, CLEANING, COMPLETE MACHINE, HYDRAULICS, CHASSIS/ATTACHMENTS, ACCESSORIES, FRAME, CHASSIS/MOUNTED EQUIPMENT, IMPLEMENT LIFT, FEEDER, STRAW SPREADER & CHOPPER, OPERATOR'S PLATFORM/CAB, CAB, Rear Frame & Driving Mechanisms, Power, ATTACHMENT, ELECTRICAL SYSTEMS, Suspension, Drawbar & Hitches, BALE EJECTOR, WHEELS, MAIN GEARBOX, HYDRAULIC SYSTEM, Miscellaneous Equipment, HYDROSTATIC DRIVE, FUEL SYSTEM, REEL, Drawbars & Hitches, PRODUCT FEEDING, RESIDUE HANDLING, CROP STORAGE/UNLOADING, SOIL PREPARATION, CHASSIS ATTACHMENTS, MISCELLANEOUS, ROTOR, CONCANVES & SIEVE, HANDLING SYSTEM, Chassis, Radiator & Sheet Metal, Steering Mechanism, Wheels & Wheel Weights

Применяется на технике

RBX561
WDX1701
WDX1101
WDX901
RDX161
RBX461
435D
445D
475
RBX451
525
8575
8576
PATRIOT350
8420
8555
8580
8590
RBX441
8840
953
8850
CPX610
CPX620
CPX420
420 TIER 3
420
620
2555
511

Ещё 366

100
140
130
8825
8825HP
1680
4400
4450
770
8880
686
HYDRO 86
HYDRO 70
666
1586
2062
2142
2152
2162
4166
4186
HYDRO 186
1456
21456
844S
743
745S
856XL
2826
1026
21026
1566
1568
886
986
1086
786
1486
1056
1056XL
956
956XL
766
HYDRO 100
966
1066
1466
1468
3488
7500
238
384
664
6588
6788
6388
3788
3388
3588
FARMALL CUB
INTERNATIONAL
5088
1840
3688
3688HC
3088
3288
1042
2042
2052
1052
WDX1002S
WDX1202S
B275
2344
2366
2365
2388
2377
844XL
845XL
385
484
485
248
DHX181
DHX361
DHX211
DHX301
DHX251
WDX1202
WDX1902
WDX2302
WD1203
WD1903
WD2303
460
DCX131
SMX91
DCX161
DCX131F
FHX300
SCX100
574
2500
884
885
684
685
HYDRO 84
268
474
674
454
2400
2504
504
946
1246
1046
RBX552
RB554
RB564
RBX563
RBX562
424
2424
606
2606
RBX442
RB444
F-135D
FV-135D
943
8480
8830
SC412
SC414
8360
8370
8320
8330
8350
8340
DHX252
RDX181
HDX3R
FARMALL C
SUPER A
SUPER A-1
SUPER AV
SUPER AV-1
F-270
FV-267D
F-267D
FU-267D
F-240
560
660
F-235
F-235D
FARMALL M
FARMALL MD
300
350
625
1055XL
955XL
8455T
8455
8465
8465T
1400
8460
B-450
340
330
FARMALL MDV
FARMALL MV
230
200
240
730C
730B
9300
530C
3850
CRUMBLER
P/T CRUMBLER
1055
955
450-SERIES
400-SERIES
9210
9230
9310
9330
8309
DC515
8315
8312
8-61
8-71
880E
880F
880UE
880UF
4000
5000
2300
354
374
2350
9380 QUADTRAC
9370 QUADTRAC
276
2155
2055
1800
434
9270
9280
2022
2044
9370
9380
9390
895
595
9350
1594
1494
2588
2577
425
5130
6130
7130
6088
7088
527B
RMX790
MRX690
5600
5700
4300
950
900
8435
596
496
780
635
1210
1212
310
9240
9250
9260
3950
501
1896
2096
3594
3394
2594
2394
1682
8820
696
146
3800
3900
885N
3204
3205
3206
736
721
725
730
5800
8930
8940
8950
8910
8920
7210
7220
7230
7240
7250
7110
7120
1010
7140
7150
1838
1294
4800
1835C
1394
4900
785
258
585
1660
2144
1640E
1666
2166
1670
1644
1640
2188
1688
1620
1822
1844
1020
616
622
3104
1206
21206
806
1256
21256
2806
706
2706
756
2756
856
2856
DRY
544
2544
656
284
184
47
37
CONCORD
186
188
1100
CUB-F17
444
2656
4156
4100
400
430
440
435
445
5140
6140
AF4077
AF4088
AF4099
4130
6150
5150
4150

Сборочные узлы

MAIN FRAME
BELT DRIVE
TAKE-UP ARM, SPRINGS & SERPENTINE ROLLER
SAFETY FRAME
TAILGATE, BELTS & CONVEYOR

Ещё 671

SICKLE DRIVE ASSEMBLY
REEL DRIVE ASSEMBLY (RIGHT)
AUXILIARY DRIVE ASSEMBLY - LEFT
AUXILIARY DRIVE ASSEMBLY - RIGHT
CAB SUPPORTS
DRIVE ASSEMBLY (PICKUP BELT TIGHTENER)
DRIVE ASSEMBLY (GEARBOX AND PLUNGER)
DRIVE ASSEMBLY (SECONDARY)
DRIVE ASSEMBLY, LEFT, AUXILIARY
DRIVE ASSEMBLY, RIGHT, AUXILIARY
DRIVE ASSEMBLY, RIGHT, AUXILIARY, S.N. CFH0139001 THRU CFH0139499
DRIVE ASSEMBLY, RIGHT, AUXILIARY, S.N. CFH0139500 AND LATER
BALE EJECTOR
ROTARY SCREEN HOOD ASSEMBLY
SCREEN ASSEMBLY
GATHERING WHEEL MOUNTING ASSEMBLY
PICKUP AUGER AND PAN ASSEMBLY
PICKUP ASSEMBLY
MAIN AXLE EXTENSION
MECHANICAL HEADER TILT
HYDRAULIC CYLINDER, TILT, 86633954
STEERING ASSEMBLY
PACKER FINGERS, TWINE BALER
CHAIN CASE, AXLE AND WHEEL ASSEMBLY
KNOTTER AND MOUNTING ASSEMBLY
CHAIN CASE AND AXLE ASSEMBLY
FAN PULLEY AND HYDROSTATIC PUMP DRIVE
KNOTTER MOUNTING AND GREASE ZERK ASSEMBLY, NON-CENTRALIZED LUBE
KNOTTER MOUNTING AND GREASE ZERK ASSEMBLY
STARWHEEL ASSEMBLY
KNOTTER LUBE ASSEMBLY
KNOTTER LUBE ASSEMBLY, CENTRALIZED, INCLUDES PAGES 6-38 THRU 6-44
HOSE SUPPORT
BALE DENSITY DOORS AND ARMS ASSEMBLY
PLATFORM SHIELDS ASSEMBLY (LOWER) (S.N. CFH0031001 THRU CFH0031380)
PLATFORM AND MOUNTING ASSEMBLIES
PLATFORM SHIELDS ASSEMBLY (LOWER) (S.N. CFH0031381 AND LATER)
DRIVE TRAIN, BELT PULLEY AND POWER TAKE-OFF
TAIL WHEEL ASSEMBLY, STANDARD
RIGHT SIDE BELT DRIVE, EXTENDED LENGTH CLEANING SYSTEM
HEADER FLOTATION AND LIFT ARM ASSEMBLY (LEFT)
HEADER FLOTATION AND LIFT ARM ASSEMBLY (RIGHT)
CYLINDER ASSEMBLY - 26 FOOT - 34 FOOT 1 INCH WING FOLD - 376048A1
CYLINDER ASSEMBLY - 22 FOOT 11 INCH WING FOLD - 381695A1
HEADER FLOTATION AND LIFT ARM ASSEMBLY, LEFT
HEADER FLOTATION AND LIFT ARM ASSEMBLY, RIGHT
HYDRAULIC HEADER ANGLE TILT ASSEMBLY
MAINFRAME - 11 FOOT LAYOUT - 18 FOOT AND 22 FOOT 11 INCH
MAIN FRAME, DISK HARROWS CODED A, B AND C
GAUGE WHEEL KIT (12 FOOT)
TAIL WHEEL REPOSITION KIT
FRAME, FIXED DRAWBAR
MAINFRAME - 12 FOOT LAYOUT - 26 FOOT 3 INCH THROUGH 35 FOOT 3 INCH
FRAME, FIXED NON-ADJUSTABLE DRAWBAR, TRACTORS WITHOUT HYDRAULIC DRAFT CONTROL
WING JOINT GROUP
FRAME AND COMPONENTS - 2162
FRAME, DRAWBAR
FRAME, HEAVY DUTY SWINGING DRAWBAR, PART OF FIXED NON- ADJUSTABLE DRAWBAR ATT
MAIN FRAME, DISK HARROW CODED D THROUGH J
FRAME, VERTICALLY ADJUSTABLE DRAWBAR
FRAME, SWINGING DRAWBAR
DRAWBAR, FRAME
DRAWBAR, FRAME, GD-5128C
GUARD ANGLE TILT KIT
FRAME, FIXED DRAWBAR, FARMALL HI-CLEAR TRACTORS
FRAME, HEAVY DUTY SWINGING DRAWBAR, PART OF FIXED NON-ADJUSTABLE DRAWBAR ATTACHMENT
FRAME, QUICK ATTACHABLE DRAWBAR, FARMALL HI-CLEAR TRACTORS
WING FLEX LINKAGE
3 FOOT WING - 18 FOOT MACHINE LAYOUT
WING BALANCE LINKAGE - 2162, BSN Y9ZN11201
FRAME, HEAVY DUTY SWINGING DRAWBAR, PART OF FIXED NON-ADJUSTABLE DRAWBAR ATT
FRAME, HAMMER STRAP
6 FOOT WING - 22 FOOT 11 INCH MACHINE LAYOUT
RIGID HITCH AND STEERING LINKAGE, IN THE FURROW PLOWS
FRAME, STOREAWAY SWINGING DRAWBAR, TRACTORS WITH THREE POINT HITCH
FRAME, SWINGING DRAWBAR, TRACTORS WITH TWO OR THREE POINT HITCH
FRAME, HAMMERSTRAP
6 FOOT WING - 26 FOOT 3 INCH MACHINE LAYOUT
FRAME, FIXED NON-ADJUSTABLE DRAWBAR, TRACTORS WITH HEAVY DUTY SWINGING DRAWBAR
FRAME, HAMMER STRAP, TRACTOR WITH ONE PIECE SWINGING DRAWBAR
9 FOOT WING - 29 FOOT 3 INCH MACHINE LAYOUT
FRAME, FIXED DRAWBAR, 766 DIESEL AND 966 HI-CLEAR TRACTORS
12 FOOT WING - 35 FOOT 3 INCH MACHINE LAYOUT
FRAME, HEAVY DUTY SWINGING DRAWBAR PART OF FIXED NON-ADJUSTABLE DRAWBAR ATT.
FRAME, FIXED NON-ADJUSTABLE DRAWBAR, TRACTORS WITHOUT HYDRUALIC DRAFT
HITCH, DISK HARROWS CODED D THROUGH J
FRAME, THREE POINT HITCH
FRAME, FAST-HITCH, CUB LO-BOY TRACTORS, BALL, DRAFT LINK, PULL BAR AND SUPPORTS
FRAME, HEAVY DUTY SWINGING DRAWBAR, WITHOUT HYDRAULIC DRAFT CONTROL, 5088 TRACTOR
MANURE FORK, GRAPPLE AND LOADER ATTACHMENT BAR
FRAME, HEAVY DUTY SWINGING DRAWBAR ATT, PART OF FIXED NON-ADJUSTABLE DRAWBAR
FRAME, FIXED DRAWBARS, NOT USED ON TRACTORS WITH FAST-HITCH
SLOW MOVING VEHICLE EMBLEM
SHANK ASSEMBLY - VIBRA CHISEL
COMBINE ADAPTER FRAME AND FLOAT BSN CCC0010466
COMBINE ADAPTER FRAME AND FLOAT ASN CCC0010467
FRAME AND FLOAT GROUP
COMBINE ADAPTER FRAME AND FLOAT BSN CCC0012342
COMBINE ADAPTER FRAME AND FLOAT ASN CCC0012343
FRAME, FAST-HITCH
ADAPTER FLOAT LINKAGE AND COMPONENTS
MECHANICAL HEADER TILT SYSTEM
CHASSIS, DRAWBAR
BELT DRIVE - JACKSHAFT, FAN
BELT DRIVE - RIGHT HAND SIDE
BELT DRIVE - RIGHT-HAND SIDE
FEEDER - COVERS
FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0253999
FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0174399
FEEDER REVERSER, WITH ROCK TRAP BSN JJC0268799
FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0290299
FEEDER REVERSER, WITH ROCK TRAP; 2365: BSN JJC0245199 / 2366: BSN JJC0177519
STRAW CHOPPER - DRIVE
SAFETY FRAME, MACHINES FITTED WITH CAB
HITCH, 18 TO 36 FT, PRIOR TO PIN D04 2003
HITCH, 18 TO 36 FT, FROM PIN D04 2003
CAB SUSPENSION
REAR FRAME & DRIVING MECHANISMS, INDEPENDENT POWER TAKE-OFF, 540 RPM, PLANETARY TYPE, REAR UNIT
REAR FRAME & DRIVING MECHANISMS, INDEPENDENT POWER TAKE-OFF, CLUTCH TYPE, REAR UNIT, CONTINUED
POWER, ENGINE MOUNTING
HITCH EXTENSION & SAFETY CHAIN
TRAILFRAME
DRAWBAR HITCH & SAFETY CHAIN
DRAWBAR, SWIVEL HITCH & SAFETY CHAIN
HITCH EXTENSION
HEADER TILT, HYDRAULIC
ATTACHMENTS, FRONT END WEIGHT ATTACHMENT
SAFETY FRAME - MACHINES FITTED WITH CAB
SUPERSTRUCTURE, FENDERS AND PLATFORMS, INTERNATIONAL TRACTORS
SUPERSTRUCTURE, DELUXE FLAT TOP FENDERS WITH ADJUSTABLE HEADLIGHTS, FARMALL TRACTORS
SUPERSTRUCTURE, PLATFORM SUPPORT
SAFETY FRAME, MACHINES FITTED W/ISO, MOUNTED CAB
SUPERSTRUCTURE, SAFETY FRAME TOP AND ROOF
SAFETY FRAME, MACHINES NOT FITTED W/ISO MOUNTED CAB
ELECTRICAL SYSTEM, ELECTRIC LIGHTING, FARMALL TRACTORS W/DELUXE FLAT TOP FENDERS
SUSPENSION, ADJUSTABLE WIDE TREAD FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS
FRONT AXLE, AXLE SUPPORT
BELT TENSION
DRAWBARS AND HITCHES
DRAWBARS AND HITCHES, SWINGING DRAWBAR, FOR TRACTORS EQUIPPED WITH FIXED DRAWBAR
DIA KIT, HYDRAULIC HITCH
MAIN AXLE, TRANSMISSION GEAR SHIFT CONTROLS
MAIN DRIVE ASSEMBLY
REEL DRIVE IDLER ARM ASSEMBLY
REEL DRIVE ASSEMBLY
DRIVE, SICKLE, ASSEMBLY
AUXILIARY DRIVE ASSEMBLY, LEFT
AUXILIARY DRIVE ASSEMBLY, RIGHT
SICKLE DRIVE & SWAYBAR ASSEMBLY
GAUGE WHEELS, PRIOR TO PIN A19 2006
CHAIN, EXTENSION
ATTACHMENTS, ELECTRALL, SPECIAL, TRANSMISSION AND DRIVE SHAFT
ATTACHMENTS, ELECTRALL, SPECIAL, GENERATOR AND EXCITER
CHASSIS, FIXED DRAWBARS, NOT USED ON TRACTORS WITH FAST-HITCH
DRAWBAR KIT (CM) FOR TRACTORS EQUIPPED WITH 3-POINT HITCH
REAR WHEEL WEIGHTS
REAR WHEEL WEIGHTS, FARMALL & STANDARD
HYDRAULIC SYSTEM, ROCKSHAFT ARMS AND EXTENSION, SPECIAL, CONVERSION PARTS FOR A1-23 HIGHWAY MOWER
DRAWBAR AND HITCHES, FIXED DRAWBAR
DRAWBAR AND HITCHES, QUICK ATTACHABLE HIGH HITCH HEAVY DUTY DRAWBAR, FARMALL HI-CLEAR TRACTORS
DRAWBAR AND HITCHES, SWINGING DRAWBAR, INTERNATIONAL TRACTORS EXCEPT HI-CLEAR WITH FIXED DRAWBAR
DRAWBARS & HITCHES, DRAWBAR, SOCKET BEAMS & BAIL, FOR ALL FARMALL 560 SERIES EXCEPT HI-CLEAR MODELS
DRAWBAR FOR 3-POINT HITCH
CHASSIS, DRAWBAR, STANDARD, "M" AND "MD"
CHASSIS, FIXED DRAWBAR, FOR TRACTORS WITHOUT FAST-HITCH
MISCELLANEOUS EQUIPMENT, FRONT END WEIGHTS, FARMALL TRACTORS
ATTACHMENTS, REAR WHEEL WEIGHTS, SPECIAL, SUPER AV AND AV-1
PICKUP, WRAPPERS AND CAM ASSEMBLY
PICKUP, WRAPPERS AND CAM ASSEMBLY, SERIAL NUMBER CFH0077006 AND LATER
PICKUP, WRAPPERS AND CAM ASSEMBLY, SERIAL NUMBER CFH0074012 AND LATER
THROTTLE CONTROL
PICKUP DRIVE ASSEMBLY (LEFT)
PICKUP DRIVE ASSEMBLY, LEFT, SERIAL NUMBER CFH0074012 AND LATER
PICKUP DRIVE ASSEMBLY, LEFT
PICKUP DRIVE ASSEMBLY, LEFT, SERIAL NUMBER CFH0077006 AND LATER
DRAWBAR, UP TO B-450/RC-7872
UPPER LINK & FLOW DIVIDER BRACKETS, WDX901/WDX1101, FROM PIN K01 2002
UPPER LINK & FLOW DIVIDER BRACKETS, WDX1701, FROM PIN K01 2002
MISCELLANEOUS EQUIPMENT, ELECTRALL GENERATOR AND EXCITER
ATTACHMENTS, POWER TAKE OFF, SPECIAL
ATTACHMENTS, SWINGING DRAWBAR, SPECIAL, FOR FARMALL 200 TRACTORS EQUIPPED WITH FAST-HITCH
ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE
ATTACHMENTS, SWINGING DRAWBAR, SPECIAL
ATTACHMENTS, FAST-HITCH WITHOUT TRACTION CONTROL (SPECIAL)
ATTACHMENTS, REAR WHEEL WEIGHTS, SPECIAL, FOR TRACTOR W/O POWER ADJUSTED REAR WHEELS OR STEEL WHEELS
ATTACHMENTS, FAST-HITCH WITH TRACTION CONTROL, SPECIAL, DRAWBAR AND BAIL
ATTACHMENTS, DRAWBAR AND BAIL
ATTACHMENTS, FAST-HITCH WITHOUT TRACTION CONTROL, FARMALL 300, SPECIAL, DRAWBAR AND YOKE
ATTACHMENTS, BAIL & CONNECTIONS, FARMALL AND INTERNATIONAL 240 TRACTORS
ATTACHMENTS, FAST-HITCH WITH TRACTION CONTROL, SPECIAL, DRAWBAR, SOCKET BEAMS & BAIL
ATTACHMENTS, POWER TAKE-OFF, SPECIAL, TRANSMISSION DRIVEN TYPE
ATTACHMENTS, FIXED DRAWBAR, SPECIAL, FARMALL 300, 350 AND 350 DIESEL
ATTACHMENTS, INDEPENDENT POWER TAKE-OFF, SPECIAL, REAR UNIT
ATTACHMENTS, SWINGING DRAWBAR, SPECIAL, FOR ALL TRACTORS EXCEPT HI-CLEAR MODELS
ATTACHMENTS, FIXED DRAWBAR, SPECIAL, FARMALL 300, 350 AND 350 DIESEL HI-CLEAR TRACTORS
ATTACHMENTS, QUICK ATTACHABLE HIGH-HITCH, HEAVY-DUTY DRAWBAR, SPECIAL, FOR HI-CLEAR TRACTORS
ATTACHMENTS, THREE POINT ADAPTER
ATTACHMENTS, SWINGING DRAWBAR, SPECIAL, FOR TRACTORS EQUIPPED W/FAST-HITCH
MAIN FRAME ASSEMBLY
FRAME ASSEMBLY
SINGLE FOLD FRAME
FRAME
DOUBLE FOLD FRAME
REAR HITCH
REAR HITCH 5 - SHANK
REAR HITCH - 7 SHANK
REAR HITCH 7 - SHANK
ATTACHMENTS, REAR WHEEL WEIGHTS, SPECIAL, FOR TRACTORS W/O POWER ADJUSTED OR STEEL REAR WHEELS
ATTACHMENTS, FIXED DRAWBAR, SPECIAL, FOR ALL TRACTORS EXCEPT HI-CLEAR MODELS
ATTACHMENTS, FIXED DRAWBAR, SPECIAL, FOR ALL HI-CLEAR MODELS
ATTACHMENTS, QUICK-ATTACHABLE, HIGH-HITCH, HEAVY-DUTY DRAWBAR, SPECIAL, FOR ALL HI-CLEAR TRACTORS
ATTACHMENTS, FAST-HITCH WITHOUT TRACTION CONTROL, FARMALL 400 & 400 DIESEL, SPECIAL, DRAWBAR & YOKE
ATTACHMENTS, ELECTRALL, SPECIAL, GENERATOR
STEERABLE AXLE MOUNTING, IF EQUIPPED
STEERABLE AXLE TURNTABLE MOUNTING, IF EQUIPPED
PIVOT ASSEMBLY, LEFT
PIVOT ASSEMBLY, RIGHT
STEERING AXLE - ADJUSTABLE, SERIAL NUMBER 764 AND ABOVE
REAR WHEEL WEIGHT ATTACHMENT
REEL ARMS, STANDARD, 18 FT TO 36FT, PRIOR TO PIN D28 2002
REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002
XK FEEDER PLATFORM TRANSPORT CARRIER C.M.
STABILISER BARS (U587), (U588),/ LINKAGE DRAWBAR (U291) (OPTIONAL EQUIPMENT)
STABILISER BARS, (U587) RIGHT HAND, (U588) LEFT HAND / LINKAGE DRAWBAR (U291), (OPTIONAL EQUIPMENT)
PICK-UP HITCH, OPTIONAL EQUIPMENT
PICK-UP HITCH (OPTIONAL EQUIPMENT)
SWINGING DRAWBAR (OPTIONAL EQUIPMENT)
UNIVERSAL DRAWBAR, OPTIONAL EQUIPMENT
PROPULSION SPEED CONTROL
ATTACHMENTS, DRAWBAR ATTACHMENT, U.S.A. AND CANADIAN MARKET ATTACHMENT, DRAWBAR, FACTORY APPLICATION
DRAWBAR ATTACHMENT
HEAVY DUTY CHECK CHAIN ATTACHMENT
KNOTTER MOUNTING ASSEMBLY
DRIVE SHAFTS AND MOUNTING
DRAWBAR ATTACHMENTS
ATTACHMENTS, DRAWBAR ATTACHMENTS, DOMESTIC AND CANADA
FAN DRIVE HOUSING, PULLEY, AND HYDROSTATIC PUMP DRIVE PLATE
FAN DRIVE HOUSING, PULLEY AND HYDROSTATIC PUMP DRIVE PLATE
FAN DRIVE HOUSING, PULLEY, AND HYDROSTATIC PUMP DRIVE PLATE PRIOR TO P.I.N. JJC133070
HEAVY DUTY CHECK CHAIN ATTACHMENT - ATTACHMENTS
DRAWBAR ATTACHMENTS, 3069521R92, 3069523R92 - ATTACHMENTS
PTO TRANSFER CASE ASSEMBLY (CONT'D)
FAN DRIVE HOUSING, PULLEY, AND HYDROSTATIC PUMP DRIVE PLATE P.I.N. JJC133070 AND AFTER
DRIVE SHAFTS & MOUNTING POWER SHIFT TRACTOR
90-7382T91 DRIVE SHAFTS & MOUNTING SYNCHROMESH TRACTOR
DRIVE SHAFTS & MOUNTING SYNCHROMESH TRACTOR
PTO TRANSFER CASE ASSEMBLY, (CONT)
REAR WHEEL WEIGHTS, SPLIT TYPE, BAR TYPE AXLE, 38 OR 42 INCH WHEELS, FIRST POSITION
REAR WHEEL WEIGHTS, SPLIT TYPE, BAR TYPE AXLE
KNOTTER TWINE FINGER AND HAY DOG ASSEMBLIES
KNOTTER LUBE ASSEMBLY, CENTRALIZED
POWER ADJUSTED REAR WHEELS
FRONT END WEIGHT ATTACHMENT
HEADER SUPPORT PIVOT AND BAR WEIGHT ASSEMBLIES
HEADER MOUNTING ASSEMBLY
HEADER MOUNTING ASSEMBLY (S.N. CFH0032001 THRU CFH0032660)
DRAWER ATTACHMENTS
HEADER MOUNTING ASSEMBLY (S.N. CFH0032661 AND LATER)
TRUSS ROD ASSEMBLY, 30 FOOT ONLY
HEADER SUPPORT LINKAGE ASSEMBLY, UPPER, SERIAL NUMBER CFH0029001 THRU CFH0029118
HEADER SUPPORT LINKAGE ASSEMBLY (UPPER)
HEADER LINKAGE MOUNTING ASSEMBLY, UPPER, SERIAL NUMBER CFH0029119 AND LATER
HEADER FLOTATION ASSEMBLY
HEADER SUPPORT FRAME AND FLOTATION ASSEMBLY
DRAWBAR ATTACHMENTS, 3070835R92, 3070844R92 - HIGH CLEARANCE
DRAWBAR ATTACHMENTS, 3070839R92, 3070841R92, 3070842R92 - HIGH CLEARANCE
FLOTATION HEADER ASSEMBLY, LEFT
FLOTATION HEADER ASSEMBLY, RIGHT
JACKSHAFT, ELEVATOR
ELEVATOR JACKSHAFT, DRIVE IDLER
ELEVATOR, JACKSHAFT, DRIVE IDLER
ELEVATOR, JACKSHAFT, DRIVE IDLER, BSN Y9G001953
AUTO RESET SHANK ASSEMBLY 2007 MODELS AND AFTER
AUTORESET SHANK ASSEMBLY
AUTO-RESET ASSEMBLY
SHANKS
MAIN FRAME AUTO-RESET ASSEMBLY
DISC MOUNT
SPRING COULTER
RIGID DISC MOUNT ASSEMBLY
PLOWING NON FOLDING FRONT MAIN DISK GANG PARTS
SPRING COULTER ASSEMBLY
LEAD SHANK ASSEMBLY
PLOWING NON FOLDING REAR MAIN DISK GANG PARTS
HYDRAULIC LEVELER BAR
SHANK ASSEMBLY
PLOWING FOLDING FRONT MAIN DISK GANG PARTS
PLOWING FOLDING LH AND RH FRONT WING DISK GANG PARTS
PLOWING FOLDING REAR MAIN DISK GANG PARTS
PLOWING FOLDING LH REAR WING DISK GANG PARTS
PLOWING FOLDING RH REAR WING DISK GANG PARTS
DEPTH CONTROL HYDRAULICS, ALL TRAILING NON WING MODELS
HYDRAULIC COUPLER CIRCUIT
HYDRAULIC COUPLER CIRCUIT, PRIOR TO P.I.N. JEE0069665
HYDRAULIC COUPLER CIRCUIT, P.I.N. JEE0069665 AND AFTER
CYLINDER ASSEMBLY - 1286452C91, 5 ID X 16 INCH STROKE
CYLINDER ASSEMBLY, 1954089C1
CYLINDER ASSEMBLY - 1954089C1, 4-1/2 ID X 34 INCH STROKE
SLAVE CARRYING WHEEL HYDRAULIC CYLINDER, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
MASTER CARRYING WHEEL HYDRAULIC CYLINDER, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
ENDWISE TRANSPORT WHEEL HYDRAULIC CYLINDER, CYCLO AIR TRAILING, 12 ROW NARROW
WING FRAME LIFT HYDRAULIC CYLINDER, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES
HYDRAULIC CYLINDER, 127700A1, WING FOLD, 24 ROW NARROW, FRONT FOLD
SLAVE CARRYING WHEEL HYDRAULIC CYLINDER, 8 ROW WIDE & 12 ROW NARROW VERTICAL FOLD
MASTER CARRYING WHEEL HYDRAULIC CYLINDER, 8 ROW WIDE & 12 ROW NARROW VERTICAL FOLD
THREADER HYDRAULIC ASSEMBLY, SERIAL NUMBER CFH0124401 AND LATER
WING FOLDING CYLINDER - 1286452C91, CYLINDER PART NUMBER IS STAMPED ON TUBE
HYDRAULIC CYLINDER - 127700A1, WING FOLD, 24 ROW NARROW - FRONT FOLD
LOAD RELIEF VALVE MOUNTING, AFS PLANTER, 12/23 SRC - RIGHT HAND SIDE
LOAD RELIEF VALVE MOUNTING, AFS PLANTER, 12/23 SRC - LEFT HAND SIDE
WING FOLDING CYLINDER 5 X 8 INCH
DRAFT CONTROL MECHANISM
TRANSPORT LIFT CYLINDER, 1286452C91, TIE-BOLT TYPE, 5 INCH ID
MODULE, AUGER
STRAWCHOPPER DRIVE
STRAW CHOPPER, STANDARD
STRAWCHOPPER, STANDARD
STRAW CHOPPER, 6 ROW FLAIL
STRAWCHOPPER, 6 ROW FLAIL
DRAWBAR AND SUPPORT FRAME, 1210, 1212, 1210G, 1212G, 1210Q, 1212Q, 1210SK AND 1212SK TRACTORS
MAIN FRAME AND BRACKETS
HITCH UPPER LINK MOUNT
HITCH UPPER LINK MOUNT - WITHOUT PTO / WITH PTO
HITCH UPPER & LOWER LINK MOUNTS
DRAWBAR AND SUPPORT FRAME, 1210, 1210G, 1210Q AND 1210SK 4WD TRACTORS WITH S/N 11158038 AND AFTER
THREE POINT HITCH UPPER AND LOWER LINK MOUNTS, PRIOR TO P.I.N. JEE0069308, 9370 AND 9380 ONLY
PICK-UP HITCH, TRACTORS FOR EUROPE ONLY
MAIN FRAME & FRONT EXTENSION, LOW TRANSPORT, DOUBLE FOLD, STANDARD TRANSPORT, VERTICAL & DOUBLE FOLD
HITCH, LOWER LINK, MOUNTS AND DRAWBAR
QUICK HITCH COUPLER,CATEGORY II, WITH STRAIGHT FRAME
QUICK HITCH COUPLER, CATEGORY II, WITH STRAIGHT FRAME
HITCH UPPER LINK MOUNT, P.I.N. JCB0028400 AND AFTER, WITHOUT PTO
ROLLER DRAWBAR, WITH HITCH
LINKAGE STABILIZERS, RIGID
QUICK HITCH COUPLER, CATEGORY II AND III, WITH OFFSET FRAME
LINKAGE STABILIZERS, TELESCOPIC, 1210G, 1210G FOUR-WHEEL DRIVE AND 1212G TRACTORS
DRAWBAR, EXTENDABLE, WITHOUT THREE POINT HITCH
ROLLER DRAWBAR, WITHOUT HITCH
DRAWBAR EXTENSIONS
SLIDING DRAWBAR
LINKAGE STABILIZERS, TELESCOPIC
SKID SHOE KIT, HK60567 SKID SHOE KIT COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY
LONG DRAWBAR KIT, WITH THREE POINT HITCH
DRAWBAR, SPECIAL WIDE SWING, WITHOUT HITCH
HAY CONDITIONER KIT, 15 FOOT ONLY, HAY CONDITIONER SERIAL NUMBER HC00300 THRU HC00334
HITCH
UNIVERSAL DRAWBAR
MAIN FRAME, PLATE MOUNTED, ALL ROW SIZES
QUICK HITCH COUPLER, CATEGORY II AND III
QUICK HITCH COUPLER P/N A137262, CATEGORY II AND III
CENTER AXLE, SINGLE WING MODELS
A137262 QUICK HITCH COUPLER, CATEGORY II AND III
MAIN FRAME AND WING FRAMES, PLATE VERTICAL FOLDING, 8 ROW WIDE
QUICK HITCH COUPLER P/N A66281, CATEGORY II AND III
A66281 QUICK HITCH COUPLER, CATEGORY II AND III
RIGID HITCH, CYCLO AIR AND PLATE TRAILING, 6 ROW NARROW AND 4 ROW
SINGLE REAR FURROW WHEEL
HITCH CRANK
FRONT WEIGHTS, REAR WEIGHTS
FOLDING HITCH, CYCLO AIR TRAILING, 6 ROW WIDE, 8 ROW, & 12 ROW NARROW PLATE TRAILING, 8 ROW NARROW
HITCH, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES
DUAL REAR FURROW WHEEL, USE ON REAR OF SINGLE, DUPLEX OR TRIPLEX
HAY CONDITIONER KIT, 15 FOOT ONLY, HAY CONDITIONER SERIAL NUMBER HC00400 AND LATER
MAIN FRAME, UPPER
WING FRAME
TRAILING HITCH ATTACHMENT
ENDWISE TRANSPORT ATTACHMENT, PLATE MOUNTED, 6 ROW WIDE & 8 ROW NARROW
FRONT & REAR WING LIFT HINGES & CYLINDER MOUNTING, NARROW TRANSPORT VERTICAL FOLD, 6 & 9 FOOT WING
WING LIFT CYLINDER MOUNTING, NARROW TRANSPORT, VERTICAL FOLD, 12 FOOT WING
PRIMARY WING FRAME, NON LEVEL LIFT MODELS, SINGLE AND DOUBLE FOLD, 33 FOOT THROUGH 45 FOOT WIDE
LAND WHEEL AND STEERING
FRONT AND REAR PRIMARY WING LIFT HINGES, AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD
PRIMARY WING LIFT CYLINDER MOUNTING, STANDARD TRANSPORT, DOUBLE FOLD
SPRING ASSEMBLY, LEFT
FEEDER HOUSING COVERS AND LIFT
SPRING ASSEMBLY, RIGHT
MAIN WHEEL
WHEELS, CASTERS AND WHEEL LOCKS
MAIN FRAME, VERTICAL FOLD AND DOUBLE FOLD, 29 FOOT THROUGH
ASSIST WHEELS
ASSIST WHEEL, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES
ROCKSHAFT, PRIOR TO 1981 SEASON
CAB MOUNTS
DRIVE/CARRYING WHEELS, CYCLO AIR AND PLATE TRAILING, ALL ROW SIZES
ROCKSHAFT, 1981 SEASON AND AFTER
AUXILIARY DRIVE/CARRYING WHEELS, CYCLO AIR TRAILING, 6 & 12 ROW NARROW PLATE TRAILING, 6 ROW NARROW
ADAPTER KIT ASSEMBLY, REEL LIFT ELECTRICAL, TRACTOR, HK60617, 8830 ADAPTER KIT COMPLETE
DRIVE/CARRYING WHEELS
GAUGE WHEEL, CRANK ADJUSTABLE
CARRYING WHEELS, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES
TRANSPORT ATTACHMENT, FOR 6 AND 8 ROW CULTIVATORS
GRAIN SEEDING TUBE HOLDER, PRIOR TO 1980 SEASON
CENTER SHANK ATTACHMENT, 6 INCH SWEEP
WING LIFT, NON LEVEL LIFT MODELS, SINGLE FOLD, 25 FOOT THROUGH 31 FOOT WIDE
WING LIFT HELPER SPRING, NON LEVEL LIFT MODELS, SINGLE FOLD MODELS, 25 FOOT THROUGH 31 FOOT WIDE
LOWER HEADER SUPPORT PIVOT ASSEMBLY
FLOATING HITCH, FRONT HITCH
FLOATING HITCH, HITCH BEAMS
CENTER SHANK ATTACHMENT, 8 INCH SWEEP, HEAVY DUTY
GANG FRAMES, NON-FOLDING, DISK HARROWS WITH PADDLE TYPE SCRAPERS
BEAM AND SHANK WITH GAUGE WHEELS
ADAPTER KIT ASSEMBLY, REEL LIFT ELECTRICAL, TRACTOR, TO BE ORDERED THRU WHOLEGOODS ONLY
MOUNTS, CAB AND FOUR POST ROPS
BEATER AND SHAKER BELT DRIVE (CONT'D)
AUGER AND KNIFE JACKSHAFT DRIVE, 15.0 FOOT HEADER
AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 15.0 FOOT HEADER
FRONT WEIGHTS
AUGER AND KNIFE JACKSHAFT DRIVE, 17.5 AND 20.0 FOOT HEADER
AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 17.5 AND 20.0 FOOT HEADER
REAR WEIGHTS
AUGER AND KNIFE JACKSHAFT DRIVE, 22.5 AND 25.0 FOOT HEADER
AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 22.5 AND 25.0 FOOT HEADER
AUGER AND KNIFE JACKSHAFT DRIVE, 30.0 FOOT HEADER, SPECIAL
AUGER JACKSHAFT DRIVE, MOUNTED ON RIGHT-HAND SIDE OF HEADER, 30.0 FOOT HEADER
CENTER SHANK ATTACHMENT, VIBRA CHISEL, 8 INCH SWEEP
SHANK ASSEMBLY, VIBRA CHISEL
GANG FRAMES, NON-FOLDING, DISK HARROWS WITH SPRING TYPE SCRAPERS
HITCH GROUP (CONT'D)
AUTOMATIC WING TRANSPORT LOCK, NON LEVEL LIFT MODELS, SINGLE & DOUBLE FOLD, 33 THROUGH 45 FOOT WIDE
AUTOMATIC WING TRANSPORT LOCK, LEVEL LIFT MODELS, VERTICAL & DOUBLE FOLD,35 THROUGH 53 FOOT WIDE
GAUGE WHEEL MOUNTING - SLIDE ADJUSTING, MOUNTED FORWARD ON FRONT BEAM, ALL DIRECT MOUNTED MODELS
GAUGE WHEEL MOUNTING, CRANK ADJUSTABLE TYPE, ALL DIRECT MOUNTED MODELS
HEADER DRIVE
MANURE FORK & GRAPPLE
THREE POINT HITCH, DIRECT MOUNTED MODELS, TWO RANK
QUICK COUPLER HITCH ADAPTER, DIRECT MOUNTED MODELS, TWO RANK
THREE POINT HITCH, DIRECT MOUNTED MODELS, THREE RANK
QUICK COUPLER HITCH ADAPTER, DIRECT MOUNTED MODELS, THREE RANK
TRACTOR HITCH, TRAIL BEHIND MODELS, 7 FOOT WIDE FRAME
TRACTOR HITCH, TRAIL BEHIND MODELS, 10 FOOT WIDE FRAME
TRACTOR HITCH, TRAIL BEHIND MODELS, 13 FOOT WIDE FRAME
SEPARATOR SIDES AND SUPPORTS
GAUGE WHEEL KIT (12 FOOT), (HK60561 GAUGE WHEEL KIT COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY)
GANG FRAMES
COLTER SHANKS AND CLAMPS
TRACTOR HITCH, NON LEVEL LIFT MODELS, SINGLE FOLD, 25 FOOT THROUGH 31 FOOT WIDE PLOWS
TRACTOR HITCH, NON LEVELS LIFT MODELS, VERTICAL AND DOUBLE FOLD, 33 FOOT THROUGH 45 FOOT WIDE
GAUGE WHEEL KIT, 12 FOOT
CUSHION CLAMP AND SHANK, REGULAR CLEARANCE - 26"
CUSHION CLAMP AND SHANK, HIGH CLEARANCE - 32", WITHOUT INNER CUSHION SPRING
CUSHION CLAMP AND SHANK, HIGH CLEARANCE - 32", WITH INNER CUSHION SPRING
CONDITIONER UPPER RUBBER ROLL, CHASSIS MOUNTED
CENTER TOOTH MOUNTING, SPRING TOOTH
TRUSS ROD KIT, 25 FOOT, 700130357 TRUSS ROD KIT COMPLETE, 25 FOOT
CENTER SHANK ATTACHMENT - 8 INCH SWEEP, HEAVY DUTY
CONDITIONER UPPER MAIN DRIVE, CHASSIS MOUNTED
TRUSS ROD KIT, 30 FOOT, 700130780 TRUSS ROD KIT COMPLETE, 30 FOOT
GAUGE WHEEL KIT, 12 FOOT, HK60561 COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY
LOWER LINKS AND STABILIZER BARS
PICK-UP HITCH, NOT NORTH AMERICA
WING LIFT HINGE
PLATFORM ATTACHMENT
LIQUID AND DRY FERTILIZER, MIN-TIL OPENER ATTACHMENT, PIVOT CYCLO AIR & PLATE TRAILING PLANTERS
MANURE FORK AND GRAPPLE
DISKS AND GANGS, USED WITH FOLDING FRAME, 1-1/8 INCH DIAMETER SQUARE ARBOR BOLT
LOWER LINKS AND HITCH BRACKETS
LINKAGE STABILIZERS AND SWAY BLOCKS, PRIOR TO P.I.N. 11519846
CENTER TOOTH / SPRING TOOTH
LINKAGE STABILIZERS AND SWAY BLOCKS, P.I.N. 11519846 AND AFTER
UNIVERSAL DRAWBAR, PRIOR TO P.I.N. 11519846
LOWER LINKS AND STABILIZER BARS AND HITCH BRACKETS
UNIVERSAL DRAWBAR, P.I.N. 11519846 AND AFTER
STABILIZER BAR, P.I.N. 11506293 AND AFTER
PICK-UP HITCH FOR UNIVERSAL DRAWBAR, NOT NORTH AMERICA
UNIVERSAL DRAWBAR, TRACTORS PRIOR TO P.I.N. 11505480
UNIVERSAL DRAWBAR, P.I.N. 11505480 AND AFTER
AUTOMATIC WING TRANSPORT LOCK, 31 FOOT (9.4 M) THROUGH 52
PRIMARY WING LIFT CYLINDER MOUNTING, DOUBLE FOLD, 43 FOOT
VIBRA CHISEL SHANK
CENTER TOOTH
GAUGE WHEEL - CRANK ADJUSTABLE
SAFETY FRAME, VERSION WITH CAB
THREE POINT HITCH, DIRECT MOUNTED
QUICK COUPLER HITCH ADAPTER, DIRECT MOUNTED
WEIGHT ATTACHMENT
CONDITIONER LIFT SUPPORT AND CHAINS
BELT DRIVE, FAN JACKSHAFT
BELT DRIVE, RH SIDE
BELT DRIVE, RIGHT-HAND SIDE
RIGID HITCH, 4 AND 6 ROW NARROW - RIGID, 4 ROW WIDE - RIGID
FOLDING HITCH, 8 ROW NARROW - RIGID, 6 ROW WIDE - RIGID
TONGUE AND HITCH, 8 ROW WIDE AND 12 ROW NARROW - VERTICAL FOLD
HITCH BRACE, MODELS WITHOUT FERTILIZER ATTACHMENT, 8 ROW WIDE & 12 ROW NARROW VERTICAL FOLD
FAN JACKSHAFT BELT DRIVE
MAIN FRAME, 8 ROW NARROW & 8 ROW WIDE, 6 ROW NARROW & 6 ROW WIDE PLANTERS BUILT PRIOR TO 1997
BELT DRIVE - FAN JACKSHAFT
CENTER MAIN AND CART WHEEL FRAMES, 12 ROW NARROW - PARALLEL FRONT FOLD
WING FRAMES & HINGE, PLANTERS BUILT UP TO AUG 97, 12 ROW NARROW - FRONT FOLD (THRU PIN DBC0001060)
WING FRAMES & HINGE, PLANTERS BUILT UP TO AUG 97, 16 ROW NARROW - FRONT FOLD (THRU PIN DBC0001049)
WING FRAMES & HINGE, PLANTERS BUILT UP TO AUG 97, 12 ROW WIDE - FRONT FOLD (THRU PIN DBC0001068)
WING FRAMES & HINGE, BUILT SEPT 97 & AFTER, 12 ROW NARROW - FRONT FOLD (PIN DBC0001124 - DBC0001406)
WING FRAMES & HINGE, BUILT SEPT 97 & AFTER, 16 ROW NARROW - FRONT FOLD (PIN DBC0001071 - DBC0001365)
WING FRAMES & HINGE, BUILT SEPT 97 & AFTER, 12 ROW WIDE - FRONT FOLD (PIN DBC0001277)
WING FRAMES AND LATCH, 12 ROW NARROW - PARALLEL FRONT FOLD
WING FRAMES & HINGE, 24 ROW NARROW - FRONT FOLD, PLANTERS BUILT UP TO AUG 97 PRIOR TO PIN DBC0001114
WING FRAMES & HINGE, 24 ROW NARROW - FRONT FOLD, BUILT SEPT 97 & AFTER (PIN DBC0001114 - DBC0001422)
TELESCOPING TONGUE, PLANTERS BUILT UP TO AUG 97, 12 ROW NARROW - FRONT FOLD (THRU PIN DBC0001060)
TELESCOPING TONGUE, PLANTERS BUILT UP TO AUG 97, 16 ROW NARROW - FRONT FOLD (THRU PIN DBC0001049)
TELESCOPING TONGUE, PLANTERS BUILT UP TO AUG 97, 12 ROW WIDE - FRONT FOLD (THRU PIN DBC0001068)
TELESCOPING TONGUE, BUILT SEPT 97 & AFTER, 12 ROW NARROW - FRONT FOLD (PIN DBC0001124 - DBC0001406)
TELESCOPING TONGUE, BUILT SEPT 97 & AFTER, 16 ROW NARROW - FRONT FOLD (PIN DBC0001071 - DBC0001365)
TELESCOPING TONGUE, BUILT SEPT 97 & AFTER, 12 ROW WIDE - FRONT FOLD (PIN DBC0001277)
TELESCOPING TONGUE, 12/23 SOLID ROW CROP - FRONT FOLD
TELESCOPING TONGUE, 24 ROW NARROW - FRONT FOLD, BUILT TO AUG 97 & SEPT 97 & AFTER (THRU DBC0001422)
FEEDER COVERS AND LIFT BRACKET
LOWER TONGUE HITCH, 12 ROW NARROW - FRONT FOLD, ALL PLANTERS BUILT TO AUG '97 AND SEPT '97 & AFTER
LOWER TONGUE HITCH, 16 ROW NARROW - FRONT FOLD, ALL PLANTERS BUILT TO AUG '97 AND SEPT '97 & AFTER
LOWER TONGUE HITCH, 12 ROW WIDE - FRONT FOLD, ALL PLANTERS BUILT TO AUG '97 AND SEPT '97 & AFTER
MAIN FRAME, 11 ROW AND 15 ROW SOLID ROW CROP
BELT DRIVE, RIGHT HAND SIDE
RIGHT-HAND SIDE BELT DRIVE
MAIN FRAME, 6/11 ROW AND 8/15 ROW SOLID ROW CROP, PLANTERS BUILT PRIOR TO 1997
RIGHT SIDE BELT DRIVE
BELT DRIVE, RIGHT SIDE
RIGHT HAND SIDE BELT DRIVE
RIGID HITCH, 4 AND 6 ROW NARROW, RIGID, 4 ROW WIDE, RIGID
BELT DRIVE - RIGHT SIDE
LOWER TONGUE HITCH, 12/23 SOLID ROW CROP - FRONT FOLD
TONGUE AND HITCH, 12 ROW NARROW - PARALLEL FRONT FOLD
FEEDER, COVERS
LOWER TONGUE HITCH, 24 ROW NARROW - FRONT FOLD, BUILT TO AUG 97 & SEPT 97 & AFTER (THRU DBC0001422)
DRAWBAR SUPPORT, 12, 16 AND 24 ROW NARROW - FRONT FOLD, 12 ROW WIDE - FRONT FOLD
ASSIST WHEELS, 8 ROW WIDE - VERTICAL FOLD
FEEDER REVERSER, WITH ROCK TRAP
FOLDING HITCH, 8 ROW NARROW, RIGID, 6 ROW WIDE, RIGID
RIGHT SIDE BELT DRIVE, (CON'T)
DRIVE/CARRYING WHEEL MOUNTING, RIGID PLANTERS, WITH THREE-PIECE BOLTED WHEEL FRAME
DRIVE/CARRYING WHEEL MOUNTING, RIGID PLANTERS, WITH ONE-PIECE WELDED WHEEL FRAME
DRIVE/CARRYING WHEELS, 8 ROW WIDE AND 12 ROW NARROW - VERTICAL FOLD
SEPARATOR JACKSHAFT DRIVE, PRIOR TO P.I.N. JJC0028498
SEPARATOR JACKSHAFT DRIVE, WITHOUT STRAW CHOPPER
FRONT CARRYING WHEELS, WHEEL FRAME MOUNTING, 8 ROW WIDE AND 12 ROW NARROW - VERTICAL FOLD
TONGUE AND HITCH, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
DRIVE WHEEL, 8 ROW WIDE AND 12 ROW NARROW - VERTICAL FOLD
HITCH BRACE, MODELS WITHOUT FERTILIZER ATTACHMENT, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
ASSIST WHEELS, 6 ROW AND 8 ROW
WING FRAMES AND HINGE, 12 AND 16 ROW NARROW, FRONT FOLD
WING FRAMES AND HINGE, 24 ROW NARROW, FRONT FOLD
1345131C1 FEEDER
LOWER TONGUE HITCH, 12 AND 16 ROW NARROW, FRONT FOLD
FEEDER
184853C1 FEEDER
1338331C1 FEEDER
LOWER TONGUE HITCH, 24 ROW NARROW, FRONT FOLD
DRAWBAR SUPPORT, 12, 16, AND 24 ROW NARROW, FRONT FOLD
FEEDER HOUSING AND TOP COVERS
ASSIST WHEELS, 8 ROW WIDE, VERTICAL FOLD
DRIVE/CARRYING WHEELS, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
FEEDER COVERS
FRONT CARRYING WHEELS, WHEEL FRAME MOUNTING, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
DRIVE WHEEL, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
FEEDER REVERSER, WITH ROCK TRAP, - JJC0268799, - JHF0032175
ROTOR DRIVE HOUSING MOUNTING, (CON'T)
FAN PULLEY LINKAGE, USED WITH 8 INCH DIAMETER IDLER PULLEY
BOLL BOX, DRIVE
REAR FAN PULLEY LINKAGE
LIQUID FERTILIZER DRIVE, 12 AND 16 ROW NARROW, FRONT FOLD
SEED, DRY FERTILIZER AND GRANULAR CHEMICAL DRIVES, 12 ROW WIDE - FRONT FOLD
LIQUID FERTILIZER DRIVE, 12 AND 16 ROW NARROW - FRONT FOLD
MODULE FRAME, FOOTBOARD, STEP AND SUPPORT STAND, 11 ROW & 15 ROW SOLID ROW CROP
MODULE FRAME, PLATFORM, STEP & SUPPORT STAND, 6/11 ROW & 8/15 ROW SOLID ROW CROP
AUGER AND KNIFE JACKSHAFT DRIVE, 15 AND 16-1/2 FOOT HEADER
AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER, 15 AND 16-1/2 FT HEADER
AUGER AND KNIFE JACKSHAFT DRIVE, 17-1/2 AND 20 FOOT HEADER
AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER) 17.5 AND 20.0 FT HEADER
AUGER AND KNIFE JACKSHAFT DRIVE, 22-1/2 AND 25 FOOT HEADER
AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER) 22 1/2 AND 25 FOOT HEADER
REAR FAN PULLEY LINKAGE, USED WITH 8 INCH DIAMETER IDLER PULLEY
AUGER AND KNIFE JACKSHAFT DRIVE, 30 FOOT HEADER
AUGER JACKSHAFT DRIVE, (MOUNTED ON RIGHT-HAND SIDE OF HEADER) 30 FOOT HEADER
LIQUID FERTILIZER APPLICATOR, MIN-TIL OPENER, 8 ROW NARROW,
LIQUID FERTILIZER APPLICATOR, MIN-TILL OPENER ATTACHMENT
ROW MARKER LIFT ARM, 24 ROW NARROW, FRONT FOLD
ROW MARKER ARM AND EXTENSION, 24 ROW NARROW, FRONT FOLD
ROW MARKER LIFT ARM, 24 ROW NARROW - FRONT FOLD, PRIOR TO
ROW MARKER LIFT ARM, 24 ROW NARROW - FRONT FOLD, P.I.N.
ROW MARKER ARM AND EXTENSION, 24 ROW NARROW - FRONT FOLD
ROW MARKER LIFT MECHANISM, 24 ROW NARROW - FRONT FOLD, PRIOR
LIQUID FERTILIZER SQUEEZE PUMP SYSTEM, 12 AND 16 ROW NARROW
STRAW CHOPPER DRIVE
LIQUID FERTILIZER PISTON PUMP SYSTEM, TANK AND SUCTION LINES
LIQUID FERTILIZER CENTRAL FILL SYSTEM, 12 ROW AND 16 ROW
LIQUID FERTILIZER TANK AND MOUNTING, 12 AND 16 ROW NARROW -
LIQUID FERTILIZER TANK AND MOUNTING, 12/23 SOLID ROW CROP -
DRY FERTILIZER FRAME CART, 8 ROW WIDE AND 12 ROW NARROW -
DRY FERTILIZER HOPPER AND MOUNTING, INNER WING, 12 AND 16
DRY FERTILIZER HOPPER AND MOUNTING, OUTER WING FRAME, 12 ROW
DRY FERTILIZER HOPPER AND MOUNTING, CENTER FRAME - 12 ROW
DRY FERTILIZER HOPPER AND MOUNTING, CENTER FRAME, 12 ROW
STRAW CHOPPER, DRIVE
LIQUID FERTILIZER SQUEEZE PUMP SYSTEM, 12 AND 16 ROW NARROW, FRONT FOLD
NO-TILL COULTER, WITH VERTICAL CUSHION SPRING, PIVOT COMPONENTS, LIQUID & FRY FERTILIZER
FERTILIZER APPLICATOR MOUNTING BAR, 12/23 SOLID ROW CROP -
LIQUID FERTILIZER CENTRAL FILL SYSTEM, 12 ROW AND 16 ROW NARROW, FRONT FOLD
LIQUID FERTILIZER TANK AND MOUNTING, 12 AND 16 ROW NARROW, FRONT FOLD
DRY FERTILIZER FRAME CART, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
DRY FERTILIZER HOPPER AND MOUNTING, INNER WING, 12 AND 16 ROW NARROW, FRONT FOLD
DRY FERTILIZER HOPPER AND MOUNTING
MIN-TILL COULTER, PIVOT, LIQUID AND DRY FERTILIZER
OPERATORS PLATFORM (CONT'D)
OPERATORS PLATFORM
OPERATORS PLATFORM, (CONT)
OPERATORS PLATFORM AND SUPPORTS, (CON'T)
CHASSIS, RADIATOR AND SHEET METAL, MAIN FRAME AND SUPPORTS
COUPLING BAR, 3104 MOWERS
CHASSIS, RADIATOR AND SHEET METAL, DELUXE FLAT TOP FENDERS AND PLATFORM, WITH ADJUSTABLE HEADLIGHTS
CHASSIS, RADIATOR & SHEET METAL, DELUXE FLAT TOP FENDERS & PLATFORM, FARMALL W/ADJUSTABLE HEADLIGHTS
CHASSIS, RADIATOR AND SHEET METAL, FENDERS AND PLATFORMS, INTERNATIONAL TRACTORS
CHASSIS, RADIATOR & SHEET METAL, INTERNATIONAL TRACTORS
CHASSIS, RADIATOR AND SHEET METAL, DELUXE FLAT TOP FENDERS WITH ADJ. HEAD LIGHTS, FARMALL TRACTORS
CHASSIS, RADIATOR & SHEET METAL,DELUXE FLAT TOP FENDERS & PLATFORM FARMALL TRACTORS W/ADJ HEADLIGHTS
DRY FERTILIZERS, DRIVE UNIT
REAR SECTIONS
CHASSIS, RADIATOR AND SHEET METAL, DELUXE FLAT TOP FENDERS, FARMALL TRACTORS
CHASSIS, RADIATOR & SHEET METAL, DELUXE FLAT TOP FENDERS, FARMALL TRACTORS W/ ADJUSTABLE HEADLIGHTS
REAR SECTIONS, STABILIZER BAR
SEMI-AUTOMATIC MARKER, CENTER SUPPORT
POWER TRAIN, PROPULSION VARIABLE SPEED DRIVE, BELT DRIVE
PACKER FINGERS AND DRIVE
SPRING CUSHION HITCH
MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 4710 AND 5010 FOUR RANK
MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 4812, 3 & 4 RANK
MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 5612 & 6012, 3 & 4 RANK
WING FRAME CASTER ASSEMBLY, FRONT
WING FRAME CASTER ASSEMBLY, BACK
CASTERS, OLD
SPRING CUSHION SHANK ASSEMBLY, EXTENDED LIFT SPRING CUSHION SHANK ASSEMBLY
SPRING CUSHION SHANK ASSEMBLY, EXTENDED LIFT SPRING CUSHION, SHANK ASSEMBLY
SOLID MOUNT SHANK ASSEMBLY
LARGE FRONT CASTER
34-B HIGH MIDDLEBUSTER BOTTOM, 10 IN., 34-C HIGH SPEED MIDDLEBUSTER BOTTOM, 10 IN., PRODUCT GRAPHICS
STEERING MECHANISM, ADJUSTABLE WIDE TREAD FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS
DRAWBARS AND HITCHES, SWINGING DRAWBAR
DRAWBARS AND HITCHES, FIXED DRAWBAR
DRAWBARS AND HITCHES, FIXED DRAWBAR, FARMALL HI-CLEAR TRACTOR
DRAWBARS AND HITCHES, DRAWBAR
DRAWBARS AND HITCHES, VERTICALLY ADJUSTABLE DRAWBAR
DRAWBARS AND HITCHES, VERTICALLY ADJUSTABLE DRAWBARS
DRAWBARS AND HITCHES, SWINGING DRAWBAR TRACTORS WITH TWO OR THREE POINT HITCH
DRAWBARS AND HITCHES, INDEPENDENT SWINGING DRAWBAR, TRACTORS WITH TWO OR THREE POINT HITCH
DRAWBARS AND HITCHES, SWINGING DRAWBAR, TRACTORS WITH VERTICALLY ADJUSTABLE DRAWBARS
DRAWBARS AND HITCHES, SWINGING DRAWBAR, TRACTORS WITH TWO OR THREE POINT HITCH
DRAWBARS AND HITCHES, QUICK ATTACHABLE DRAWBAR, FARMALL HI-CLEAR TRACTORS
DRAWBARS AND HITCHES, STOREAWAY SWINGING DRAWBAR, TRACTORS WITH THREE POINT FAST HITCH
DRAWBAR AND HITCHES, THREE POINT HITCH
DRAWBARS AND HITCHES, THREE POINT HITCH
DRAWBARS AND HITCHES, TWO POINT HITCH
PLANTER ATTACHING UNIT
WHEELS AND WHEEL WEIGHTS, STEEL REAR WHEELS, EXTENSION TIRES & LUGS 54 INCH X 12 INCH
WHEELS & WHEEL WEIGHTS, STEEL REAR WHEELS EXTENSION TIRE AND LUGS, 54 INCH X 12 INCH
PACKER FINGERS
STANDARD STRAW CHOPPER; (VAR) 722761116
STANDARD STRAW CHOPPER; (VAR) 722761106
6 ROW FLAIL STRAW CHOPPER; (VAR) 425140036, 425140046, 722761106, 722761116
JACKSHAFT, IDLER, TAILINGS ELEVATOR
STANDARD STRAW CHOPPER
6 ROW FLAIL STRAW CHOPPER
STRAW CHOPPER, ROTOR, CONCAVE
MODULE, AUGER ASSY, FRAME
MOUNT, AUGER MOTOR
JACKSHAFT, ELEVATOR; (Prod Date) after 01-MAR-2015; (VAR) 425400107, 425400117, 425400207, 425400217
STRAW CHOPPER; (Prod Date) after 01-MAR-2015; (VAR) 722761117, 722761267
JACKSHAFT, FAN, DRIVE; (Prod Date) after 01-MAR-2015; (VAR) 425400107, 425400117, 425400207, 425400217
JACKSHAFT, IDLER, TAILINGS ELEVATOR; (Prod Date) after 01-MAR-2015; (VAR) 425400127, 425400137, 425400147, 425400157, 425400167, 425400177, 425400187, 425400197, 425400287
VAR - 722761 - STRAW CHOPPER, FIXED BLADE, STANDARD DRIVE; (VAR) 722761166
TAILINGS ELEVATOR JACKSHAFT IDLER
DIA KIT, CHOPPER BODY ASSY; (Prod Date) after 01-MAR-2015
STRAW CHOPPER, FIXED BLADE, STANDARD DRIVE; (VAR) 722761166
STRAW CHOPPER; (VAR) 722761027, 722761037
JACKSHAFT, IDLER, TAILINGS ELEVATOR; (VAR) 425400607, 425400657, 425400687, 425400697, 425400777, 425400787, 425400797, 425400807, 425400817, 425400827, 425400837, 425400847, 425400857, 425400867, 425400877, 425400887, 425400897, 425400907, 425400987
STRAW CHOPPER 6 ROW FLAIL; (VAR) 425140027, 425140057

Заменён на

280954

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.