Стопорная шайба, 3/8" McC492-11038

По каталогу Case IH

Название

Стопорная шайба, 3/8"

Название (EN)

LOCK WASHER,3/8"

Номер в каталоге

492-11038

Размеры и исполнение

Starter motor| (Rondelle Grower 9.5 mm) 3/8"| if used 3/8"| mounting bolt 3/8"| (Not Shown)| for O4596AB head lamp 3/8"| KIT repair parts (Includes P/N's: 222F, 387C, 791-8S, 821-9S, 5096, 5152, 5254, 8360, 8679, 8739, 8743, 8745 and 8747)| frame to cylinder block 3/8"| (frame to cylinder block) 3/8"| Used with A170746| Use on A170746| WASHER, LOCK, 3/8"| 4WD| If used| Use with D128116| 2 used per bushing 3/8"| Used with D131916, H672900| If Used| See page(s) 9A-87, Ref 36| 4 used on 4 row wide| Not Illustrated| For use w/clamp 403585R1| To parking brake bracket| Moulding, edge - 3285 mm| 18FT & 21FT(6), 25FT(8), 30FT(9), 36FT(11)| (filter to cylinder block) 3/8"| LOCK WASHER, 3/8"| 644| (Replaces washer K19482) 3/8"| (Replaces washer 120382) 3/8"| no longer used 3/8"| Air induction system| with tandem hydraulic pump 3/8"| gasoline models 3/8"| clip to rear axle, used with 885, 885H and 885G tractors (Replaces washer K19482) 3/8"| diesel models 3/8"| cylinder block to main frame 3/8"| air induction system 3/8"| Used with 1275854C1 clamp| plate to cylinder block 3/8"| without air conditioning 3/8"| with air conditioning 3/8"| 3/8"| LOCK WASHER, , engine serial no. 517923 and after 3/8"| used with P/N 413-620 bolt 3/8"| 18 Ft & 21 Ft (6), 25 Ft (8), 30 Ft (9), 36 Ft (11)| 36 Ft| HDX20P| (brackets to frame) 3/8"| (clutch to flywheel) 3/8"| (Rondelle Grower 9.5 mm) (pour 757988R91 and 757989R91 unique) 3/8"| Self sealing coupling, Version with cab 2000| filter to cylinder block (Replaces washer K19482) 3/8"| pump to adapter plate (Replaces washer K19482) 3/8"| adapter plate to engine (Replaces washer K19482) 3/8"| bridge piece to cab, four used with 885Q and 885QH tractors, six used with 885Sk and 885LP tractors 3/8"| brackets to clutch housing, used with 885, 885H, 885G and 885N tractors (Replaces washer K19482) 3/8"| used with 1210, 1210G, 1212 and 1212G tractors (Replaces washer K19482) 3/8"| support to cab, four used with 1210Q and 1212Q tractors, six used with 1210Sk and 1212Sk tractors (Replaces washer K19482) 3/8"| cable to cylinder block, used with 885, 885H 885N and 885G tractors (Replaces washer K19482) 3/8"| charge filter mounting 3/8"| (cover to reduction) 3/8"| (cover to case) 3/8"| (pump to back plate) 3/8"| Replaces 192-111| LOCK WASHER, , Alternator mounting 3/8"| Lower front 3/8"| Ground speed sensor 3/8"| Speed sensor shield 3/8"| LOCK WASHER, , engines prior P.I.N. 11399939 3/8"| LOCK WASHER, , engines P.I.N. 11399939 and after 3/8"| not shown 3/8"| engines P.I.N. 11431342 and after 3/8"| LOCK WASHER, , starter to engine (Replaces washer K19482) 3/8"| LOCK WASHER, (Replaces washer 120382) 3/8"| LOCK WASHER, (Replaces washer K19482) 3/8"| Conveyor Lamp 3/8"| Conveyor 3/8"| LOCK WASHER, , bracket to cylinder block (Replaces washer K19482) 3/8"| LOCK WASHER, , tractors with tandem hydraulic pump (Replaces washer K19482) 3/8"| alternator mounting 3/8"| 105 ampere 3/8"| WASHER, LOCK, , Conveyor lamp 3/8"| ground speed sensor 3/8"| ground speed sensor attachment 3/8"| use with Danfoss pump 3/8"| heavy duty cast front axle 3/8"| used with 1212, 1212G, 1210Q, 1212Q, 1210Sk, 1212Sk, 1210SkG, 1212SkG and 1210Q 4WD tractors (Replaces washer K19482) 3/8"| steering to gearbox cover (Replaces washer K19482) 3/8"| valve to column, used with 885LP, 885Q, 885QH and 885Sk tractors 3/8"| column to valve, used with 885, 885G, 885H and 885N tractors (Replaces washer K19482) 3/8"| cover, used with 885, 885G, 885H and 885N tractors (Replaces washer K19482) 3/8"| use with Danfoss pumps 3/8"| used with 885Q and 885QH tractors (Replaces washer K19482) 3/8"| bracket to cylinder block (Replaces washer K19482) 3/8"| swept back cast front axle 3/8"| bracket to cylinder block 3/8"| (Replaces washer 3050221R1) 3/8"| order 425-106 3/8"| reservoir to cylinder head, used with 1210SkG and 1212SkG tractors (Replaces washer K19482) 3/8"| LOCK WASHER, , used to attach fan drive pulley to flywheel assembly (Replaces washer 120382) 3/8"| cover to body (Replaces washer K19482) 3/8"| 36 FT| used with 885Q, 885QH, 885Sk and 885LP tractors (Replaces washer K19482) 3/8"| WASHER, LOCK, , Not shown 3/8"| MFD| 50110 MFD| guard to brackets (Replaces washer K19482) 3/8"| LOCK WASHER, (Replaces washer 3050221R1) 3/8"| clutch to flywheel (Replaces washer K19482) 3/8"| bracket to clutch housing 3/8"| lever to cross shaft 3/8"| with welded bracket support plate 3/8"| used with 885, 885H, 885G and 885N tractors 3/8"| fork to cross shaft 3/8"| NC (Replaces washer K19482) 3/8"| lever to cross-shaft 3/8"| used with Ref. 13 bolt 3/8"| lever to support bracket (Replaces washer K19482) 3/8"| (Replaces washer K19482), housing 3/8"| end plate to spacer (Replaces washer K19482), housing 3/8"| valve to gearbox (Replaces washer K19482) 3/8"| sixteen used with housing K951989, K951988, K954074 and K954073; eighteen used with all other housing 3/8"| U414 (907847) 3/8"| (drop arm to shaft) 3/8"| (steering housing to gearbox cover) 3/8"| (steering box to gearbox cover) 3/8"| bracket to axle (Replaces washer K19482) 3/8"| hand lever to bracket (Replaces washer K19482) 3/8"| brackets to axle (Replaces washer K19482) 3/8"| cylinders to mounting brackets (Replaces washer K19482) 3/8"| bracket to rear axle (Replaces washer K19482) 3/8"| bracket to gearbox end plate (Replaces washer K19482) 3/8"| hand lever to bracket 3/8"| (support bracket to axle) 3/8"| return filter mounting 3/8"| connector plate to rear axle housing (Replaces washer K19482) 3/8"| Not shown| pipe to hitch bracket (Replaces washer K19482) 3/8"| pipe to control valve (Replaces washer K19482) 3/8"| pipe to relief valve (Replaces washer K19482) 3/8"| double remote 3/8"| pipe to right-hand hitch bracket, used with bolt 413-624, item 10 above (Replaces washer K19482) 3/8"| pipes to relief valve (Replaces washer K19482) 3/8"| cover and valve to axle housing (Replaces washer K19482) 3/8"| Charge filter mounting| filter to ramshaft bracket (Replaces washer K19482) 3/8"| pump to plate (Replaces washer K19482) 3/8"| connector to cylinder, used with 885, 885H and 885G tractors (Replaces washer K19482) 3/8"| connector to cylinder (Replaces washer K19482) 3/8"| ", chains to PTO housing (Replaces washer K19482) 3/8"| chain to PTO housing (Replaces washer K19482) 3/8"| cap to gear housing 3/8"| quick disconnect coupler assembly, double remote 3/8"| quick disconnect assembly, double remote 3/8"| Version w/o cab| (flywheel housing to engine) 3/8"| (clutch housing to frame) 3/8"| (dynamo fixing to cylinder block) 3/8"| 2WD tractor 3/8"| MFD tractor 3/8"| (15 used on 12 foot) 3/8"| (10 used on 12 foot) 3/8"| (17 used on 12 foot) 3/8"| (16 used on 12 foot) 3/8"| (8 used on 12 foot) 3/8"| For models 258, 595| housing to engine (Replaces washer K19482) 3/8"| (11 used on 12 foot) 3/8"| gusset to frame platform (Replaces washer K19482) 3/8"| front frame to upper frame 3/8"| 3230| windscreen to bulkhead panels (Replaces washer K19482) 3/8"| bulkheads to supports and supports to platforms (Replaces washer K19482) 3/8"| hinges to bulkhead (Replaces washer K19482) 3/8"| (used with item 16) 3/8"| (1490) 3/8"| bracket to reductions (Replaces washer K19482) 3/8"| (used with item 27) 3/8"| plate to cab floor (Replaces washer K19482) 3/8"| rubber mountings to brackets (Replaces washer K19482) 3/8"| tractor serial number 11153600 and after, bracket to rear crossmember (Replaces washer K19482) 3/8"| (6 used on 12 foot) 3/8"| bracket to rear cross beam, used with 1210Sk four-wheel drive tractors with serial number 11158600 and after (Replaces washer K19482) 3/8"| rubber mountings to brackets 3/8"| spring frame to carrier support, used with 1210, 1210 four-wheel drive and 1212 tractors 3/8"| support to support bracket, used with 1210, 1210 four-wheel drive and 1212 tractors 3/8"| U-brackets to sliding support, used with 1210G and 1212G tractors (Replaces washer K19482) 3/8"| clutch housing to main frame (Replaces washer K19482) 3/8"| (1680E) 3/8"| (4 used on 12 foot) 3/8"| brackets to toolbox, used with 1210, 1210G, 1210Sk, 1212, 1212G and 1212Sk tractors (Replaces washer K19482) 3/8"| (2 used on 12 foot) 3/8"| (48 used on 12 foot) 3/8"| stays to stub axles (Replaces washer K19482) 3/8"| anchor bracket fastening, used with 885Q, 885QH and 885Sk tractors with serial numbers prior to 11006080 3/8"| Center tooth| fenders to axle (Replaces washer K19482) 3/8"| front frame to upper frame (Replaces washer K19482) 3/8"| order 492-11038 3/8"| spring tooth 3/8"| prior to P.I.N. 1225 3/8"| support to clutch housing 3/8"| bulkheads to frame platform (Replaces washer K19482) 3/8"| stay to bulkhead (Replaces washer K19482) 3/8"| frame to support (Replaces washer K19482) 3/8"| support to bracket (Replaces washer K19482) 3/8"| support to axle housing (Replaces washer K19482) 3/8"| (Replaces washer 115093) 3/8"| see page 9A-52, item 10 3/8"| see page 9A-39 3/8"| WASHER, LOCK, , Parts list page 9A-53, drum housing, service kit 3/8"| conveyor chute, short extensions, 1844 cotton picker 3/8"| (Replaces washer 366862C1) 3/8"| NC 3/8"| 4 used on 4 row wide 3/8"| WASHER, LOCK, , 4 used on 4 row wide 3/8"| LOCK WASHER, (Replaces washer 115093) 3/8"| (Replaces washer 115093)| LOCK WASHER, , used with tube 690346C2 (Replaces washer 115093) 3/8"| (P.I.N. JJC0097190 and after) 3/8"| used with 1640 combines (Replaces washer 115093) 3/8"| used with 1822 cotton pickers (Replaces washer 115093) 3/8"| If so equipped| LOCK WASHER, , air conditioner compressor mounting 3/8"| air conditioner compressor mounting 3/8"| LOCK WASHER, , air conditioning compressor mounting 3/8"| (Not Illustrated)

Система техники

FRAMES AND BALLASTING, COMPLETE MACHINE, PLATFORM, CAB, BODYWORK AND DECALS, ATTACHMENTS/HEADERS, IMPLEMENT POWER TAKE OFF, BRAKES, Drive Train, ELECTRICAL, FRAME, HYDRAULICS, ENGINE, STEERING, MAIN GEARBOX & DRIVE, ELECTRICAL SYSTEMS, Driveline, FRONT AXLE SYSTEM, PRESSING - BALE FORMATION, Pickup, FUEL SYSTEM, YIELD MONITOR, MAIN GEARBOX, PRODUCT FEEDING, TYING/WRAPPING, HYDRAULIC SYSTEMS, BRAKES & CONTROLS, BALE EJECTOR, FEEDER, POWER TRAIN, TRACKS/STEERING, EJECTION, CLEANING, BALE CHAMBER, MAIN FRAME, WHEELS, CHASSIS, CHASSIS/ATTACHMENTS, CHASSIS/MOUNTED EQUIPMENT, Decals & Attachments, IMPLEMENT LIFT, CROP STORAGE/UNLOADING, PICKING SYSTEM, ROTOR, CONCANVES & SIEVE, BEATER & CLEANING FANS, HANDLING SYSTEM, GRAIN ELEVATORS & AUGERS, BASKET, GRAIN TANK & UNLOADER, CAB & AIR CONDITIONING, STRAW SPREADER & CHOPPER, Power, SUPERSTRUCTURE, CROP CUTTING, Accumulator, OPERATOR'S PLATFORM/CAB, RESIDUE HANDLING, BLOWER SPOUT, ACCESSORIES, CLUTCH, Cooling, CROP CONDITIONING, REEL, Gearbox, HYDROSTATIC DRIVE, Final Drive Reductions, HYDRAULIC SYSTEM, TRACKS & TRACK SUSPENSION, Drawbars & Hitches, Engine Controls & Instruments, Auxiliary Drive Units, THRESHING, Steering & Front Axle, CHASSIS ATTACHMENTS, MISCELLANEOUS, WATER SYSTEM, Suspension, SEPARATION

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.