Болт, Hex, 5/8" - 11 x 2", Gr 5 — фото недоступно

Болт, Hex, 5/8" - 11 x 2", Gr 5 McC413-1032

Артикул: McC413-1032
Наличие: Под заказ
Предложений: 1
Производитель: Case IH

Цена за штуку 375 ₽

Цена с НДС

актуально на момент последнего обновления каталога

Кол-во

Введите нужное количество и нажмите «Уточнить наличие» — цена и сроки поставки обновятся.

Итого за 1 шт. 375 ₽

Купить

Доступные предложения

Склад Уфа 375 ₽ Остаток по запросу: 0 шт.

Нет в наличии

По каталогу Case IH

Название: Болт, Hex, 5/8" - 11 x 2", Gr 5
Название (EN): BOLT,Hex, 5/8" - 11 x 2", Gr 5
Номер в каталоге: 413-1032
Размеры и исполнение: 5/8-11 x 2, hex head| SCREW, 5/8-11 x 2 HEX HD CAP| 5/8-11 X 2 HEX HD CAP| SCREW, 5/8-11 x 2 hex-hd cap| HEX. HD., 5/8 X 2| HEX., 5/8 UNC X 2 0| HEX., 5/8 UNC X 2| HEX. HD 5/8" X 2"| HEX., 5/8 UNC X 2 -28 ROW-| HEX., 5/8 UNC X 2 -24 ROW-| Capscrew| HEX. HD 15.87 X 50.80 MM| SCREW, 5/8 x 2 hex-hd cap| hexagonal head, 5/8"x 2"| hexagonal head, 5/8" x 2"| C Hex, 5/8"-11 x 2", G5| 5/8 x 2 type 5| 5/8 x 2 pln type 5, 6388| 5/8 x 2 pln type 5, 6588 w/o cam sway limiting system using 1-3/4 IPTO shaft| 5/8 x 2 pln type 5, 6788 w/o cam sway limiting system using 1-3/4 IPTO shaft| 5/8 x 2 pln type 5| 5/8 x 2 pln type 5, 3388| 5/8 x 2 pln type 5, 3588 w/o cam sway limiting system using 1-3/4 IPTO shaft| 5/8 x 2 pln type 5, 3788 w/o cam sway limiting system using 1-3/4 IPTO shaft| 5/8 x 2 pln type 5, 3588| 5/8 x 2 pln type 5, 3588 w/cam sway limiting system using 1-3/4 IPTO shaft| 5/8 x 2 pln type 5, 3788 w/cam sway limiting system using 1-3/4 IPTO shaft| SCREW, 5/8-11 x 2 znd hex-hd cap| SCREW, 5/8-11 x 2 hex-hd. cap| 5/8-11 x 2" cap| BOLT, 5/8 x 50 mm, for ref. 8| 5/8-11 x 2 hex head| BOLT, 5/6 X 2 PLN TYPE S| BOLT, 5/8 X 2 PLN TYPE S| 5/8 X 2 PLN TYPE 5| BOLT 5/8 X 2 PLN| BOLT 5/8 X 2 PLN TYPE 5| 51 MM| 51 mm| 5/8-11 X 2 hex hd cap| SCREW, 5/8-11 x 2 hex hd cap| SCREW, 5/8-11 x 2 hex-hd cap, not part of swinging drawbar attachment| 5/8-11 X 1-5/8 hex hd cap| SCREW, 5/8-11 hex-hd cap| hex, hd., 5/8" x 2"| hex. hd., 5/8" x 2"| SCREW, 5/8 x 2" cap| hexagonal head, 15.87 x 50.80 mm| SCREW, 3/8-11 x 2 hex-hd cap| V.T.H. 15.87 x 50.80 mm| SCREW, 5/8-11 x 3 hex-hd cap| 5/8 X 2 HEX HD| 5/8-11 X 2 HEX HD| 5/8 X 2 TYPE 5| 3/8 X 2 TYPE 5| SCREW, cap, hex-hd., 5/8 - 1 INC x 2"| SCREW, hex-hd., 5/8-11NC x 2"| - hex, 5/8 NC x 2 inch| 5/8-11 X 1-3/4 C| A| SCREW, cap, hex-hd., 5/8-11NC x 2"| 5/8 x 2"| SCREW, cap, hex-hd., 5/8-11NC x 2" (Front) [A] [C]| SCREW, cap, hex-hd., 5/8-11NC x 2" [A]| SCREW, cap, hex-hd., 5/8-11NC x 2" (used on L H housing)| SCREW, cap, hex-hd., 5/8-11NC x 2" (Front)| 5/8 x 2 znd type 5| Vis tete hexagonale de fixation de la plaquette sur tirant inferieur (15,8 x 50,7") gros filet (5/8 NC x 2")| Boulon a tete hexagonale 15,9 x 50,8 mm (5/8 x 2") gros filet (NC)| 5/8" x 51 mm, model 353| 5/8" x 51 mm, model E353| 5/8" x 51 mm, model 323| 5/8" x 51 mm, model 423| SCREW, cap, hex-hd., 5/8-11 NC x 2"| NC| 5/8" x 2" hex-hd.| hex-hd., 5/8" x 2"| hex. hd. 5/8" x 2"| hex hd., fenders| hex hd. 5/8" x 2", fenders| BOLT 5/8" x 51 mm, model 323| BOLT 5/8" x 51 mm, model 353| BOLT 5/8" x 51 mm, model 423| BOLT, 51 mm, 433V+E, 533V+E and 633V+E| BOLT, 51 mm, 733V+E and 833V+E| BOLT 51 mm, for models 733, 833| 5/8-11 x 2 hex-hd| - hex, 5/8 NC x 2 inch (Replaces bolt 271723)| hex-hd. 5/8" x 2"| - hex, 5/8 NC x 2 inch, grade 5| NC, Hex.| 5/8 UNC x 2 in.| - hex, 5/8 NC x 2 inch, grade 5, Side rail| hex, 5/8 NC x 2 in, Rear axle housing to main frame rear, used with 1210Q, 1212Q, 1210Q 4WD, 1210Sk, 1212Sk and 1210Sk 4WD tractors; 1210, 1212, 1210G, 1212G, 1210 4WD and 1210G 4WD tractors with S/N 11152576 and after (Replaces bolt K601204)| If used| - hex, 5/8 NC x 2 inch (Front hinge)| hex, 5/8 NC x 2 inch (Replaces bolt K601204)| - hex, 5/8 NC x 2 inch (See Note B)| - hex head, 5/8" - 11 NC x 2"| - hex, 5/8 x 2 inch, Grade 5| - hex, 5/8" - 11 NC x 2"| - hex, 5/8 x 2 inch| hex, 5/8 NC x 2 inch, grade 5| 5/8 x 2 inch| BOLT 51 mm| 5/8 x 50 mm| BOLT, 5/8 x 2 inch| BOLT, 5/8 x 50 mm| BOLT, 51 mm| - hex, 5/8 NC x 2 inch, 4 row wide, 4 row narrow, 6 row narrow, 8 row wide rigid| - hex, 5/8 NC x 2 inch, if used| 5/8-11 x 2 hex-hd cap| SCREW, 5/8-11 x 2 hex-hd cap, 9 for carbureted, 15 for diesel engine tractors| 5/8 X 2" BOLT| SCREW, 5/8-11 x 2 C-Z hex-hd cap| SCREW, 5/8-11 x 2" C-Z hex-hd. cap| NUT, 5/8-11 C-Z hex.| SCREW, 5/8-11 x 2 C-Z hex-hd. cap| SCREW, 5/8 x 2 C-Z hex-hd. cap| 5/8 x 2 type 5, bracket to support angle| SCREW, cap, 5/8 x 2| SCREW, 5/8-11 x 2 cd-pltd hex-hd cap| SCREW, 5/8-11 x 2 cd pltd hex-hd cap| 5/8 type 5| SCREW, 5/8 x 1 x 2 C-Z hex-hd cap, for Farmall 656 tractors| SCREW, 5/8 x 1 x 2 C-Z hex-hd cap, for 756 & 856 tractors| 5/8-11 hex-hd| W/NUT, 5/8 x 2" C-Z type 2| 5/8-11 x 2 C-Z hex-hd cap| cap, hex head, 5/8"-11 x 2"| SCREW, 5/8-11 x 2 hex-hd cap, Farmall tractors with serial no. 20749 & above, International tractors with serial no. 5130 & above| SCREW, 5/8-11 x 2 hex-hd. cap, Farmall tractors with serial no. 27010 & above, International tractors with serial no. 4347 & above| SCREW, 5/8-11 X 2 ZND HEX HD CAP| SCREW, 5/8 X 2 HEX HD CAP| 5/8-11 x 2 HEX HD| SCREW, 5/8-11 X 2 HEX HD CAP
Система техники: FRAME, ENGINE, TYING/WRAPPING, IMPLEMENT POWER TAKE OFF, Driveline, Accessories & Attachments / Miscellaneous, ELECTRICAL SYSTEMS, Propulsion, Drive Train, ENGINE EQUIPMENT, FRONT AXLE SYSTEM, FEEDER, BALE CHAMBER, BRAKES, HYDRAULICS, Steering Mechanism, FRAMES AND BALLASTING, MISCELLANEOUS, SHEET METAL, CHASSIS/ATTACHMENTS, CHASSIS, COMPLETE MACHINE, CHASSIS/MOUNTED EQUIPMENT, CLUTCH, PICKING SYSTEM, PICTORIAL INDEX, FRONT AXLE, Threshing / Separation / Cleaning, SUPERSTRUCTURE, CHOPPER BODY, POWER TRAIN, Suspension, Sheet Metal, Grilles & Fenders, Mounted Equipment, REAR AXLE, Elevators, ATTACHMENT, ACCESSORIES, Assorted Packages & Sets, STEERING, REEL, PRODUCT FEEDING, SOIL PREPARATION, BASKET, Decals & Attachments, Chassis, Radiator & Sheet Metal, ATTACHMENTS/HEADERS, EJECTION, MAIN GEARBOX & DRIVE, Controls, Drawbars & Hitches, Accessories & Attachments, Hay Conditioner, Platforms

Применяется на технике

435D
445D
475
484
248
2504
504
RBX461
RBX561
SBX530
SBX520
SBX540
8555
856XL
844S
743
745S
511
770
953
KM-225
KM-280
KM-325
SM-325
KM-360
CM325
CM360
STEIGER
503
8-61

Ещё 283

8-71
431
321
8575
8576
8590
8580
FHX300
1026
21026
CX70
CX80
CX90
CX100
CX50
CX60
1456
21456
4786
4568
4586
6588
6788
6388
3488
3788
3388
3588
4366
2826
686
HYDRO 86
HYDRO 70
666
SMX91
404
2404
PATRIOT350
743XL
745XL
844XL
DX18E
DX22E
DX25E
884
885
784
785
278
258
584
585
684
685
HYDRO 84
268
574
2500
766
966
HYDRO 186
HYDRO 100
1066
1466
1468
1566
1568
664
785XL
885XL
685XL
485XL
585XL
674
454
2400
6810
6814
1042
4400
4450
2042
90XT
95XT
1845C
B275
606
2606
531
541
CPX610
620
2555
CPX620
420
CPX420
420 TIER 3
BMX184
424
2424
943
238
384
RBX453
RBX463
RB454
RB464
RBX452
RBX462
RBX562
RBX563
F-267D
FU-267D
F-135D
533
833
633
733
433
FV-267D
FV-135D
533V
433E
533E
1460
240
350
300
F-240
744
844
644
4000
5000
8435
5100
F-270
1290
323
383
453
423
1480
1470
1440
F-235
F-235D
353
E353
E423
724
654
553
824
527B
730C
730B
9300
530C
MRX690
200
TIGER-MATE
434
2276
2350
276
2300
354
450-SERIES
400-SERIES
733E
833E
433V
633E
633V
DHX181
DHX361
DHX211
DHX301
DHX251
RMX790
150
8585CE
8585
8545
1400
625
635
2394
2594
1255
955
880E
880F
880UE
880UF
3394
3594
5600
5700
485
501
1210
1212
4300
1822
1844
CASE IH
4900
885N
900
8500
146
4800
3800
810
825
5800
385
1594
1494
950
2155
2055
2022
2044
740
940
840
540
640
1800
400
275
375
616
622
428
435
445
544
2544
656
2656
4700
133
10
60
6000
153
163
234
210
6500
225
45
47
37
500
CONCORD
5500
LIQUID
201
C-153
1124
440
444
1256
21256
706
2706
1206
21206
806
2806
856
2856
4100
4156
430
425D
364
CE630

Сборочные узлы

HITCH
LOWER LINKS, THREE POINT HITCH, WITH OUTSIDE CHECK CHAINS, AUSTRALIAN MARKET
LOWER LINKS, THREE POINT HITCH, WITH OUTSIDE CHECK CHAINS
LOWER LINKS - THREE POINT HITCH, W/OUTSIDE CHECK CHAINS, UP TO 484/5806, UP TO 268/691
LOWER LINKS - THREE POINT HITCH, W/OUTSIDE CHECK CHAINS, 484/5807 & UP, 248/692 & UP

Ещё 363

CARBURETED ENGINE, CRANKCASE AND RELATED PARTS
ELECTRIC TWINE WRAP, RH
GEARBOX & FLYWHEEL
TONGUE AND DRIVE (PRIMARY) ASSEMBLY
SERVICE TOOLS FOR HYDRAULIC SYSTEM, GC-5510B
SERVICE TOOLS FOR HYDRAULIC SYSTEM
DRIVE ASSEMBLY (GEARBOX AND PLUNGER)
MAIN FRAME
AXLE AND PRIMARY DRIVE
PLUNGER
WARNING AND TAIL LIGHT KIT - RIGID FRAME
WARNING AND TAIL LIGHT KIT - FOLDING FRAME
PROPULSION SPEED VARIATOR, MECHANICAL VERSION
DRAFT FRAMES
AXLE ASSEMBLY, S-40
ENGINE SHAFT, DRIVE HOUSING, PUMP ADAPTOR
MAIN AXLE EXTENSION
UJ CUTTER BAR & DRIVE FOR DETACHABLE PLATFORM
CUTTER BAR & DRIVE, FOR DETACHABLE PLATFORM
KNOTTER BRAKE ASSEMBLY, S.N. CFH0113001 THRU CFH0163128
KNOTTER BRAKE ASSEMBLY, S.N. CFH0163129 AND LATER
KNOTTER BRAKE ASSEMBLY
ELECTRICAL SYSTEM
DRIVE TRAIN, HYDROSTATIC HOUSING, COVERS, DRIVE PLATE, HYD. PUMPS, MULT. CONTROL VALVE & CONNECTIONS
HYDRAULIC TRAILER BRAKE CIRCUIT
DRIVE TRAIN, REAR FRAME, COVER AND CONNECTIONS
DRIVE TRAIN, TRANSFER CASE
DRIVE TRAIN, REAR FRAME COVER AND CONNECTIONS
DRIVE TRAIN, REAR FRAME AND COVERS
DRIVE TRAIN, REAR AXLE CENTER FRAME
DRIVE TRAIN, FRONT AND REAR AXLE CENTER FRAME, 4366 TRACTOR
DRIVE TRAIN, REAR FRAME, SPACER AND COVER
HYDRAULIC TONGUE SHIFT KIT
STEERING MECHANISM
BOOM - CENTER SECTION
GRILLE GUARD KIT - 719849076
NEEDLES AND NEEDLE GUARD, WIRE BALERS
LOWER LINKS - THREE POINT HITCH - WITH OUTSIDE CHECK CHAINS
LOWER LINKS, THREE-POINT HITCH, W/OUTSIDE CHECK CHAINS
LOWER LINKS, THREE-POINT HITCH, WITH OUTSIDE CHECK CHAINS
LOWER LINKS - THREE POINT HITCH - TELESCOPIC LOWER LINKS WITH OUTSIDE CHECK CHAINS
LOWER LINKS, THREE POINT HITCH, 574 S/N 102265 & UP, 2500 S/N 100027 & UP, W/OUTSIDE CHECK CHAINS
LOWER LINK, THREE-POINT HITCH, TELESCOPIC LOWER LINKS, W/OUTSIDE CHECK CHAINS
LOWER LINKS,THREE POINT HITCH, 574 UP TO S/N 102264, 2500 UP TO S/N 100026, W/OUTSIDE CHECK CHAINS
LOWER LINKS, THREE POINT HITCH, W/OUTSIDE CHECK CHAINS, AUSTRALIAN MARKET
FRAME, SWINGING DRAWBAR, TRACTORS WITH TWO OR THREE POINT HITCH
FRAME, INDEPENDENT SWINGING DRAWBAR, WITH TWO OR THREE POINT HITCH
FRAME, THREE POINT HITCH ATTACHMENT, TRACTORS WITH DRAFT CONROL AND DRAFT SENSING
FRAME, HEAVY DUTY SWINGING DRAWBAR, PART OF FIXED NON-ADJUSTABLE DRAWBAR ATTACHMENT
FRAME, STOREAWAY SWINGING DRAWBAR
FRAME, VERTICALLY ADJUSTABLE DRAWBAR
FRAME, THREE POINT HITCH
LOWER LINKS - THREE POINT HITCH -
FRAME, TWO POINT FAST HITCH, 666 TRACTORS ONLY
FRAME, LOWER LINKS, THREE POINT HITCH WITH OUTSIDE CHECK CHAINS, SERIAL NO. 6097 AND BELOW
LOWER LINKS, THREE POINT HITCH
FRAME, SWINGING DRAWBAR, ONE PIECE
THREE POINT HITCH, LOWER LINKS, WITH OUTSIDE CHECK CHAINS, AUSTRALIAN MARKET
FRAME, FIXED NON-ADJUSTABLE DRAWBAR, TRACTORS WITH HEAVY DUTY SWINGING DRAWBAR
FRAME, SWINGING DRAWBAR, TRACTORS WITH THREE POINT HITCH
FRAME, LOWER LINK, THREE POINT HITCH WITH OUTSIDE CHECK CHAINS, SERIAL NO. 6098 AND ABOVE
LOWER LINKS, THREE POINT HITCH, WITH OUTSIDE CHECK CHAIN, AUSTRALIAN MARKET
FRAME, LOWER LINKS, THREE POINT HITCH, 33 INCH FIXED LOWER LINKS & OUTSIDE CHECK CHAINS
THREE POINT HITCH, LOWER LINKS, WITH OUTSIDE CHECK CHAINS
FRAME, LOWER LINKS, THREE POINT HITCH, 33 INCH TELESCOPIC LOWER LINKS & OUTSIDE CHECK CHAINS
FRAME, THREE POINT HITCH, 766, 966 AND HYDRO 100 TRACTORS WITH DRAFT CONTROL AND DRAFT SENSING
AUTOMATIC HITCH
TINE LEVELER ATTACHMENT
BAT REEL
ROLLING LEVELER
HINGE ASSEMBLY - FLAT-FOLD - RIGID - 18 FOOT MACHINE
HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE
SHANK ASSEMBLY - VIBRA EDGE
GANG ASSEMBLY LAYOUT - 7-1/2 INCH SPACING
GANG ASSEMBLY LAYOUT - 9 INCH SPACING
TRENCHER AUGER - MOUNTING (NORTH AMERICA)
BACKHOE FRAME - SWING TOWER, D100XR (NORTH AMERICA), WITH CESSNA VALVE
TRENCHER AUGER MOUNTING NORTH AMERICA
TRENCHER AUGER MOUNTING (NORTH AMERICA)
CHASSIS, FENDERS
CLUTCH, CLUTCH HOUSING AND COVER
CUTTER BAR & DRIVE
DRUM LIFT SUPPORT
84" MAINFRAME & BLADE
FRONT AXLE, FRONT AXLE AND LOWER BOLSTER
FRONT AXLE, FRONT AXLE AND LOWER BOLSTER, 45 TO 61 INCH NARROW TREAD AXLE
TAILINGS ELEVATOR, RETURN TO CYLINDER & GRAIN
FRONT AXLE, FRONT AXLE & LOWER BOLSTER, 49 - 69" NARROW TREAD AXLE,TRAC. W/HYDROSTATIC PWR. STEERING
SUPERSTRUCTURE, REAR FENDERS, FLAT TOP
SUPERSTRUCTURE, SAFETY FRAME, UPPER, AND FENDERS
CUTTERHEAD & POWER TAKE OFF, SHEARBOLT
1.8M SINGLE CAM WIDE PICKUP, REEL
1.8M DUAL CAM WIDE PICKUP, REEL
2M WIDE PICKUP, REEL, CURVED PICKUP TINES
2M WIDE PICKUP, REEL, STRAIGHT & CURVED PICKUP TINES
2M WIDE PICKUP, REEL, ROTOR
ADJUSTABLE FRONT AXLE FOR FARMALL F-267D & UTILITY FU-267
FRONT AXLE - V-VERSION
FRONT AXLE - E-VERSION
ADJUSTABLE FRONT AXLE FOR VINEYARD FV-267 D
FRONT AXLE "V - VERSION"
FRONT AXLE "E - VERSION"
SHEET METAL, FENDERS AND PLATFORMS FOR 48 INCH NARROW TREAD REAR AXLE
ELEVATOR DRIVE
CHASSIS, STEERING MECHANISMS, FARMALL AND INTERNATIONAL 240 TRACTORS
FRONT AXLE, STEERING KNUCKLES, ADJUSTABLE FRONT AXLE AND SUPPORTS, INTERNATIONAL TRACTORS
CHASSIS, CLUTCH HOUSING AND COVERS
REAR AXLE, FARMALL HI-CLEAR TRACTORS
DRAWBAR KIT, FOR TRACTORS EQUIPPED WITH 3-POINT HITCH
FAN AND WATER PUMP, C-258 GAS ENGINE P.I.N. 6005 THRU 10008, C-258 GAS ENGINE P.I.N. 372001 & AFTER
STUFFER, FRAME AND SUPPORT ASSEMBLIES
HYDRAULIC HOSE SUPPORT
DRAWBAR KIT (CM) FOR TRACTORS EQUIPPED WITH 3-POINT HITCH
CHASSIS, STEERING MECHANISM AND FRONT FRAME CHANNELS
FAN FOR 8-71
DRAWBAR FOR FARMALL F-267 D, UTILITY FU-267 D & VINEYARD FV-267 D, W/3-POINT HITCH
FRONT PULL HOOK, FARMALL
FAN FOR 431
DRAW BARS V-VERSION
FRONT AXLE TIE ROD WEIGHT, FARMALL, STANDARD
PLATFORM REAR AUGER DRIVE
TAILINGS ELEVATOR RETURN TO CYLINDER & GRAIN PAN FOR 8-61
FRONT PULL HOOK
FRONT AXLE TIE ROD WEIGHT
CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS
FRONT AXLE, 323/383/423/453/E383/E423/E453
CHASSIS, REAR AXLE, FOR HI-CLEAR TRACTORS
CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS, FOR TRACTORS EQUIPPED W/ADJUSTABLE TREAD AXLE
GRAIN AND TAILINGS ELEVATORS, ELEVATOR DRIVE, RICE S/N 1501 & ABOVE, GRAIN & CORN S/N 14001 & ABOVE
GRAIN AND TAILINGS ELEVATORS, ELEVATOR DRIVE, GRAIN, SERIAL NO. 1180 AND ABOVE
GRAIN AND TAILINGS ELEVATORS, ELEVATOR DRIVE, S/N 10001 AND ABOVE
DRAWBAR FOR 3-POINT HITCH
TAILINGS ELEVATOR RETURN TO CYLINDER & GRAIN PAN FOR 431
TOW HOOK, FARMALL F-235-D
FRONT AXLE
ATTACHMENTS, FAST-HITCH WITHOUT TRACTION CONTROL, FARMALL 300, SPECIAL, ROCKSHAFT & LATERNAL LINKS
DRAW BARS
ATTACHMENTS, ROCKSHAFT, SPECIAL, FOR INTERNATIONAL 300 UTILITY TRACTORS W/TWO PIECE BELLCRANK
MAIN FRAME ASSEMBLY
FRAME ASSEMBLY
MAIN FRAME WING
REAR HITCH ASSEMBLY
TIGER TINE REAR HITCH ATTACHMENT
ACS REAR HITCH ATTACHMENT
FENDERS - CHASSIS
REAR INDUSTRIAL FENDERS ATTACHMENT UP TO 2276/913
FENDERS
FENDERS, CANADIAN MARKET
CHASSIS, FENDERS, U.S.A. AND CANADIAN MARKET
ATTACHMENTS, FAST-HITCH W/O TRACTION CONTROL, FARMALL 400 & 400 DIESEL, SPECIAL, ROCKSHAFT & LINKS
FRONT AXLE - 3146900R91
REEL ARMS, STANDARD, 18 TO 36 FT, FROM PIN D28 2002
WARNING AND TAILIGHT KIT FOLDING
HYDRAULIC LIFT ADAPTOR PACKAGE, FOR 20X8, 14X10, 16X10, 10X12, 14X12, 10X14, 8X18, AND 12X14
AGRICULTURAL REAR FENDER ATTACHMENT - ATTACHMENTS
TWISTER CONTROL ASSEMBLY (WIRE)
AUXILIARY DRIVE
THREE POINT LINKAGE, 3070834R91 - HIGH CLEARANCE
THREE POINT LINKAGE, 3070831R91 - HIGH CLEARANCE
THREE POINT LINKAGE ATTACHMENT
EMERGENCY HAND BRAKE
DISC ATTACHMENT
DISC LEVELER 2007 AND PRIOR UNITS
DISC LEVELER 2008 AND AFTER UNITS
DISC LEVELER
RESIDUE MANAGER TINE FLOATING
RESIDUE MANAGER NO TILL FLOATING
REAR WHEEL FENDERS - NARROW TREAD
BLOWER PUMP HYDRAULIC SYSTEM, RESERVOIR TO PUMP & PUMP MOUNTING PARTS
FEEDER DUST FAN
FRONT BALLAST WEIGHTS (U589) (OPTIONAL EQUIPMENT)
SIDE RAILS
SIDE RAILS / SAFETY CHAIN SUPPORT
DEPTH CONTROL ROCKSHAFT, ALL TRAIL BEHIND MODELS
REAR AXLE HOUSING AND COVERS
AXLE AND MOUNTING, ALL TRAIL BEHIND MODELS
FRONT WING LIFT HINGE, FLAT FOLD, RIGID
IDLER ARMS AND SPROCKET, REAR SPINDLE CHAIN
REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, RIGID
FRONT WING LIFT HINGE, FLAT FOLD, FLOATING
ADJUSTABLE COIL TINE MULCHER
PRIMARY WING FRAME AXLES AND DEPTH CONTROL
REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, FLOATING
FRONT & REAR WING LIFT HINGES & CYLINDER MOUNTING, NARROW TRANSPORT VERTICAL FOLD, 6 & 9 FOOT WING
FRONT & REAR WING LIFT HINGES & CYLINDER MOUNTING, STANDARD TRANSPORT VERTICAL FOLD, 6 & 9 FT WING
FRONT AND REAR PRIMARY WING LIFT HINGES, AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD
FRONT SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, RIGID
REAR SECONDARY WING LIFT HINGE, LOW TRANSPORT, DOUBLE FOLD, RIGID
FRONT SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, FLOATING
HIGH-HITCH DRAWBAR AND PICK-UP HITCH, 885G TRACTORS
SECONDARY WING FRAME AXLES AND DEPTH CONTROL
REAR SECONDARY WING LIFT HINGE, LOW TRANSPORT, DOUBLE FOLD, FLOATING
FRONT SECONDARY WING LIFT HINGE, STANDARD TRANSPORT, DOUBLE FOLD, RIGID
REAR SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, STANDARD TRANSPORT, DOUBLE FOLD, RIGID
DRIVE/CARRYING WHEELS, CYCLO AIR AND PLATE TRAILING, ALL ROW SIZES
FRONT & REAR SECONDARY WING LIFT HINGES & CYLINDER MOUNTING, STD TRANSPORT, DOUBLE FOLD, FLOATING
CAB AND FOUR POST ROPS FRAME, FRONT AND REAR MOUNTS
DRIVE WHEELS, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES
WING FRAME AXLE AND DEPTH CONTROL, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE
WING FRAME AXLES AND DEPTH CONTROL, LEVEL LIFT MODELS, VERTICAL AND DOUBLE FOLD PRIMARY WING
WING FRAME AXLES AND DEPTH CONTROL, LEVEL LIFT MODELS, DOUBLE FOLD SECONDARY WING
LEVEL LIFT HITCH, NARROW TRANSPORT, BEAMS
LEVEL LIFT HITCH, LOW TRANSPORT AND STANDARD TRANSPORT, BRACES AND BEAMS
CAB AND 4 POST ROPS FRAME, FRONT AND REAR MOUNTS
TRAILING HITCH
LIFT ASSIST PARTS, USED W/ FRAME SECTION NUMBER 1, UNITS W/O SPRING CENTERED CASTER, 45' WIDE DRILL
HITCH, CONCORD TANK
LIFT ASSIST PARTS, USED W/ FRAME SECTION NUMBER 6, UNITS W/O SPRING CENTERED CASTER, 45' WIDE DRILL
LIFT ASSIST PARTS, USED W/ FRAME SECTION NUMBER SIX, UNITS W/ SPRING CENTERED CASTER, 45' WIDE DRILL
TRANSPORT ARM PARTS, USED W/ FRAME SECTION NO. 3, UNITS W/O SPRING CENTERED CASTER, 45' WIDE DRILL
TRANSPORT ARM PARTS, USED W/ FRAME SECTION NO. 4, UNITS W/O SPRING CENTERED CASTER, 45' WIDE DRILL
TRANSPORT ARM PARTS, USED WITH FRAME SECTION NUMBER TWO, 33 FOOT WIDE DRILL
GAUGE WHEEL PARTS, USED WITH FRAME SECTION NUMBER ONE, 45 FOOT WIDE DRILL
GAUGE WHEEL PARTS, USED WITH FRAME SECTION NUMBER ONE, 33 FOOT WIDE DRILL
GAUGE WHEEL PARTS, USED WITH FRAME SECTION NUMBER THREE, 45 FOOT WIDE DRILL
GAUGE WHEEL PARTS, USED WITH FRAME SECTION NUMBER TWO, 33 FOOT WIDE DRILL
TWO POINT FAST HITCH
WING FRAME AXLES AND DEPTH CONTROL WITH DUAL WHEELS
CUSHION DISK GANG, 7-1/2 INCH SPACING
MASTER CYLINDER LIFT ARM AND CART LINK, USED WITH FRAME SECTION NUMBER THREE, 45 FOOT WIDE DRILL
MASTER CYLINDER LIFT ARM AND CART LINK, USED WITH FRAME SECTION NUMBER TWO, 33 FOOT WIDE DRILL
WING FRAME AXLES AND DEPTH CONTROL WITH SINGLE WHEEL
CUSHION DISK GANG, 9 INCH SPACING
LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, LEVEL LIFT MODELS, FLAT FOLD
LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS. LEVEL LIFT MODELS, VERTICAL AND DOUBLE FOLD
TRAILING HITCH, ALL LEVEL LIFT MODELS
HART CARTER, FLOATING CUTTER BAR, COUNTER BALANCE, DRIVE AND
BASKET INTERLOCK
FRONT FURROW WHEEL, PRIOR TO 1975
LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, UNITS WITH FRONT CONNECTING HITCH TUBE
FRONT FURROW WHEEL AND LEVELING SCREW, 1975 AND AFTER
WAGON HITCH KIT, (HK50392 WAGON HITCH KIT COMPLETE)
LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, UNITS WITH CENTER HITCH TUBE
LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS
PRIMARY WING LIFT AND HINGE, 31 FOOT (9.4 M) THROUGH 34 FOOT
PRIMARY WING LIFT AND HINGE, 37 FOOT (11.4 M) THROUGH 52
FRONT WING LIFT HINGE, FLAT FOLD - RIGID, 19 FOOT THROUGH 23
REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD -
FRONT WING LIFT HINGE, FLAT FOLD - FLOATING, 25 FOOT AND 27
FOUR POST ROLL OVER PROTECTIVE STRUCTURE, NORTH AMERICA ONLY
FRONT AND REAR WING LIFT HINGES, AND CYLINDER MOUNTING
FOUR POST ROLL OVER PROTECTION STRUCTURE, LOW PROFILE, NORTH AMERICA ONLY
FRONT SECONDARY WING LIFT HINGE, DOUBLE FOLD - RIGID, 43
REAR SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING
FRONT AND REAR SECONDARY WING LIFT HINGES, AND CYLINDER
HYDRAULIC PUMP AND CLUTCH ASSEMBLY (GEAR PUMP)
REFELCTORS (REAR FENDERS)
REAR FENDERS, REFLECTORS
HYDRAULIC PUMP AND CLUTCH ASSEMBLY (RADIAL PISTON)
CASTER WHELL MOUNTING, MAIN FRAME, 12 FOOT PRIMARY WING
12 Foot Primary Wing Double Fold
CASTER WHEEL MOUNTING, 12 FOOT WING VERTICAL FOLD, 6 FOOT
LOWER LINKS - THREE POINT HITCH, 33 INCH FIXED, VERSION WITH OUTSIDE CHECK CHAINS, 258, 585
LOWER LINKS - THREE POINT HITCH, VERSION WITH OUTSIDE CHECK CHAINS, 248, 385, 485
LOWER LINKS - THREE POINT HITCH, 33 INCH FIXED, VERSION WITH OUTSIDE CHECK CHAINS
LOWER LINKS - THREE POINT HITCH - VERSION WITH OUTSIDE CHECK CHAINS 485XL
LEVEL LIFT HITCH, BRACES AND BEAMS, FLAT FOLD
LOWER LINKS - 3 POINT HITCH, 33 INCH TELESCOPIC, VERSION WITH OUTSIDE CHECK CHAINS, 248, 485, 585
LOWER LINKS - THREE POINT HITCH, 33 INCH FIXED - VERSION WITH OUTSIDE CHECK CHAINS
LOWER LINKS - 3 POINT HITCH, 33 INCH TELESCOPIC, VERSION WITH OUTSIDE CHECK CHAINS
LOWER LINKS - 3 POINT HITCH, 33 INCH TELESCOPIC - VERSION WITH OUTSIDE CHECK CHAINS
LOWER LINKS-3 POINT HITCH,33" TELESCOPIC, VERSION W/ OUTSIDE CHECK CHAINS,VERSION W/TELESCOPIC LINKS
LEVEL LIFT HITCH, BRACES AND BEAMS, VERTICAL FOLD AND DOUBLE
TELESCOPING TONGUE, PLANTERS BUILT UP TO AUG 97, 12 ROW NARROW - FRONT FOLD (THRU PIN DBC0001060)
TELESCOPING TONGUE, PLANTERS BUILT UP TO AUG 97, 16 ROW NARROW - FRONT FOLD (THRU PIN DBC0001049)
TELESCOPING TONGUE, PLANTERS BUILT UP TO AUG 97, 12 ROW WIDE - FRONT FOLD (THRU PIN DBC0001068)
TELESCOPING TONGUE, BUILT SEPT 97 & AFTER, 12 ROW NARROW - FRONT FOLD (PIN DBC0001124 - DBC0001406)
TELESCOPING TONGUE, BUILT SEPT 97 & AFTER, 16 ROW NARROW - FRONT FOLD (PIN DBC0001071 - DBC0001365)
TELESCOPING TONGUE, BUILT SEPT 97 & AFTER, 12 ROW WIDE - FRONT FOLD (PIN DBC0001277)
TELESCOPING TONGUE, 12/23 SOLID ROW CROP - FRONT FOLD
TELESCOPING TONGUE, 24 ROW NARROW - FRONT FOLD, BUILT TO AUG 97 & SEPT 97 & AFTER (THRU DBC0001422)
DRIVE/CARRYING WHEELS, 8 ROW WIDE AND 12 ROW NARROW - VERTICAL FOLD
DRIVE WHEELS, 12, 16 AND 24 ROW NARROW - FRONT FOLD, 12 ROW WIDE - FRONT FOLD
MAIN DRIVE, 12 ROW NARROW - PARALLEL FRONT FOLD
WING FRAMES AND HINGE, AFS PLANTER, 12 ROW AND 16 ROW NARROW
TELESCOPING TONGUE, 12 AND 16 ROW NARROW, FRONT FOLD
TELESCOPING TONGUE, 24 ROW NARROW, FRONT FOLD
DRIVE/CARRYING WHEEL MOUNTING, ALL RIGID PLANTERS, COMMON TO ALL RIGID MODELS
DRIVE/CARRYING WHEELS, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD
DRIVE WHEELS, 12, 16 AND 24 ROW NARROW, FRONT FOLD
BASKET PIVOT SUPPORT
HITCH AND CONNECTIONS
CHASSIS, RADIATOR AND SHEET METAL, MAIN FRAME AND TAIL WHEEL BEAM
CHASSIS, RADIATOR AND SHEET METAL, MAIN FRAME AND SUPPORTS
CHASSIS, RADIATOR AND SHEET METAL, CLUTCH HOUSING AND COVER, GEAR DRIVE TRACTORS
CHASSIS, RADIATOR AND SHEET METAL, CLUTCH HOUSING AND COVERS, GEAR DRIVE TRACTORS
MAIN FRAME ROCKSHAFT AND DEPTH CONTROL MACHINES WITH AXLE PIVOT THRU ROCKSHAFT TUBE
FRAME, HYDRAULIC FOLDING FLEX AND NON-FLEX, UNITS Z THROUGH
NO. 5 COMBINED TILLAGE HITCH, FOR 4 ROW AND 6 ROW NARROW
TRACTOR HITCH
SPRING TOOTH HARROW ATTACHMENT, FOR 4 ROW AND 6 ROW NARROW
ROCKSHAFT UNIT, 10 AND 13 FOOT
CHASSIS, RADIATOR AND SHEET METAL, MUD GUARD AND SHIELD
WING LIFT SUPPORTS
HYDRAULIC CYLINDER LIFT PARTS, 10 FOOT AND 13 FOOT
ROLLING GUIDE FIN, FLEXIBLE
HYDRAULIC COUPLERS
HITCH, SEE NOTES, FOR UNITS A, B, C, D, G, N AND Q THRU T
HITCH, SEE NOTES, FOR 6-ROW AND 8-ROW
HITCH-FOR TWO-POINT FAST HITCH
TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP FARMALL 300, 350, & 460 TRACTORS
MAIN FRAME SUPPORT, BRACKET AND CLAMP FARMALL 400, 450, 560 AND SUPER MTA TRACTOR
TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP FARMALL 504 TRACTOR
TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP FARMALL 706, 756, AND 826 TRACTORS
POWER TRAIN, CHASSIS PLATFORM DRIVE WITH ENGINE FLYWHEEL AND PTO
WHEEL AXLE
TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP FARMALL 1206, 1256 & 1456 TRACTORS
MAIN FRAME SUPPORT, BRACKET AND CLAMP FARMALL M AND SUPER M TRACTORS
POWER TRAIN, FINAL DRIVE
MAIN FRAME SUPPORT, BRACKET AND CLAMP FARMALL 766, 966 AND 1066 TRACTORS
TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP CASE 730 AND 830 TRACTOR
ROCKSHAFT, DISK GANG DEPTH CONTROL
VERTICAL LIMITER,FOR SAFETY W/2 PT FAST HITCH W/IH F706,F756,F806 PR F856 TRAC BUILT PRIOR TO 7/1972
TRACTOR MOUNTINGS, MAIN FRAME SUPPORT, BRACKET AND CLAMP DEERE 3010, 3020, 4010, AND 4020 TRACTOR
NEEDLES AND GUIDES, FOR WIRE BALER
WISCONSIN ENGINE ATTACHMENT, ENGINE AND ENGINE MOUNTING
QUICK ATTACHABLE HITCH, FOR TWO POINT FAST HITCH, 6 ROW WIDE & 8 ROW 28 TO 40 IN. SPACING
TRIP SHANK ASSEMBLY
THREE BAR HARROW
DEPTH CONTROL ROCKSHAFT, TRAIL BEHIND
AXLE AND CONNECTIONS, TRAIL BEHIND
C-FRAME LIFT HELPER SPRING, PRIOR TO SERIAL NO 5526
GRAIN HEADER, HART CARTER FLOATING CUTTER BAR, COUNTER BALANCE DRIVE & SHIELD
QUICK ATTACHABLE HITCH, FOR TWO POINT FAST HITCH
LIQUID CHEMICAL FERTILIZERS, TWO POINT HITCH
GAUGE WHEEL, 31-1/2 FT.
WING FRAME AND LIFT PARTS, BUILT PRIOR TO AUGUST 1976 SEASON
SPOUT SUPPORT ATTACHMENT
MAIN AND WING FRAME ROCKSHAFTS, BUILT PRIOR TO AUGUST, 1976 SEASON
WING LIFT HYDRAULICS, W/LEVER TYPE DIVERTER VALVE, W/DUAL HYD CONTROL, 1968 TO 69 SEASON
WING LIFT HYDRAULICS, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYDRAULIC CONTROLS, 1969 SEASON TO 1974 SEASON
WING LIFT HYD, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYD CTRL, 22'6" MODEL BUILT 1974 TO AUG 1976 SEASON
HYD CONNECTIONS,W/HYD WING LIFT,W/SINGLE CTRL HYD,22'6' MODEL BUILT PRIOR TO THE 1969 SEASON
HYD CONNECTIONS,W/HYD WING LIFT,W/DUAL CTRL HYD,22'6" MODEL BUILT PRIOR TO THE 1969 SEASON
CONTROLS AND DRIVES, PLATFORM DRIVE AND COUNTERSHAFT, WISCONSIN VH4D ENGINE, V BELT
CONTROLS AND DRIVES, PLATFORM DRIVE AND COUNTERSHAFT, WISCONSIN VG4D ENGINE V BELT, S.N. H5074 & UP
ENGINE REAR SUPPORT, 105 COMBINES
FRAME AND TANK MOUNTING
AUGER MOUNT
HAY CONDITIONER, HAY CONDITIONER LIFT MECHANISM
DEPTH CONTROL HYD. SYSTEM, WING TYPE, WITH WELDED TYPE CYLINDER, MACHINES BUILT 1980 THROUGH 1985
GRINDER AND SHELLER UNITS, MAIN DRIVE GEARS AND CASE
CONTROLS, PLATFORM DRIVE CONTROL
STEERING MECHANISM, FRONT AXLE AND LOWER BOLSTER
STEER MECH, FRT AXLE & LOWER BOLSTER, 49-69" NARROW TREAD AXLE, TRACTORS W/HYDROSTATIC POWER STEERNG
DRAWBARS AND HITCHES, VERTICALLY ADJUSTABLE DRAWBAR
DRAWBARS AND HITCHES, VERTICALLY ADJUSTABLE DRAWBARS
DRAWBARS AND HITCHES, SWINGING DRAWBAR TRACTORS WITH VERTICALLY ADJUSTABLE DRAWBARS
DRAWBARS AND HITCHES, SWINGING DRAWBAR
DRAWBARS AND HITCHES, SWINGING DRAWBAR, TRACTORS WITH TWO OR THREE POINT HITCH
DRAWBARS AND HITCHES, INDEPENDENT SWINGING DRAWBAR, TRACTORS WITH TWO OR THREE POINT HITCH
DRAWBARS AND HITCHES, SWINGING DRAWBAR, TRACTORS WITH VERTICALLY ADJUSTABLE DRAWBARS
DRAWBARS AND HITCHES, QUICK ATTACHABLE DRAWBAR, FARMALL HI-CLEAR TRACTORS
DRAWBARS AND HITCHES, TWO POINT FAST HITCH
DRAWBARS AND HITCHES, STOREAWAY SWINGING DRAWBAR, TRACTORS WITH THREE POINT FAST HITCH
DRAWBARS AND HITCHES, THREE POINT HITCH, FARMALL TRACTORS AND INTERNATIONAL ROW CROP TRACTORS
DRAWBARS AND HITCHES, THREE POINT HITCH, INTERNATIONAL TRACTORS EXCEPT ROW CROP
DRAWBARS AND HITCHES, THREE POINT HITCH
PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AIR CONDITIONER & CONNECTIONS S/N 8852 & ABOVE
PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AIR CONDITIONER & CONNECTIONS
NEEDLES AND GUIDES, FOR WIRE BALERS, UP TO 430/6557, UP TO 440/8872
HAY CONDITIONER, HAY CONDITIONER LIFT MECHANISM, FOR USE W/10-1/2 FT. PLATFORM & PICK UP REEL
PLATFORMS, REEL DRIVE

Заменён на

86505999

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.