Болт, Hex, 5/8" - 11 x 3-3/4", Gr 5 — фото недоступно

Болт, Hex, 5/8" - 11 x 3-3/4", Gr 5 McC413-1060

Артикул: McC413-1060
Наличие: Под заказ
Предложений: 1
Производитель: Case IH

Цена за штуку 403 ₽

Цена с НДС

актуально на момент последнего обновления каталога

Кол-во

Введите нужное количество и нажмите «Уточнить наличие» — цена и сроки поставки обновятся.

Итого за 1 шт. 403 ₽

Купить

Доступные предложения

Склад Уфа 403 ₽ Остаток по запросу: 0 шт.

Нет в наличии

По каталогу Case IH

Название: Болт, Hex, 5/8" - 11 x 3-3/4", Gr 5
Название (EN): BOLT,Hex, 5/8" - 11 x 3-3/4", Gr 5
Номер в каталоге: 413-1060
Размеры и исполнение: 5/8 UNC X 3-3/4 HEX HD| 5/8-11 X 3-3/4 C| 5/8 X 3-3/4 HEX HD, Course Threads| V.T.H. 15.87 x 95.24 mm, grain conveyor, Course Threads| SCREW, 5/8-11 x 3-3/4 hex-hd cap, Course Threads| hex, 5/8-11 x 3-3/4| 5/8-11 x 3-3/4 C| hex. hd., 5/8" x 3-3/4", Course Threads| grain conveyor, Course Threads| hex, 5/8"-11 x 3-3/4"| SCREW, 5/8-11 x 3-3/4 hex-hd cap| SCREW, 5/8-11 x 3-3/4 hex-hd cap, engine frt cover to channel mounting, Course Threads| 5/8 x 3-3/4 pln type 5| SCREW, 5/8-11 x 3-3/4 hex-hd cap engine frt cover to channel mounting, Course Threads| 5/8 UNC X 3-3/4 HEX HD, Course Threads| 5/8 UNC X 3-3/4 HEX HE, Course Threads| SCREW, HEX-HD. CAP 5/8 X 3-3/4, 574, Course Threads| SCREW, HEX-HD. CAP 5/8 X 3-3/4, 2500, Course Threads| SCREW HEX HD CAP 5/8-11 X 3-3/4, Course Threads| SCREW, HEX HD CAP 5/8 x 3-3/4, Course Threads| bolt hex head, 5/8 x 3-3/4, grade 5 ZND| SCREW, HEX HD CAP 5/8- 11 x 3-3/4, Course Threads| SCREW, HEX-HD. CAP 5/8 X 3-3/4, Course Threads| SCREW, hex hd 5/8 X 3-3/4, Course Threads| Course Threads| SCREW, hex hd cap 5/8-11 X 3-3/4| SCREW, HEX HD CAP 5/8-11 X 3-3/4, Course Threads| - hex, 5/8 NC x 3-3/4 inch| 5/8 x 3-3/4| 5/8 x 3-3/4 pln type 5, Course Threads| SCREW, 5/8-11 x 3-3/4 hex-hd. cap| SCREW, 5/8-11 x 3-3/4 znd hex-hd cap| 5/8 x 3-3/4 type 5| SCREW, 5/8 x 3-3/4 znd hex-hd cap| SCREW, 5/8-11 x 3-3/4 znd hex-hd. cap| SCREW, 5/8 x 3-3/4 hex-hd cap| SCREW, Course Threads| SCREW, cap, hex-hd., 5/8-11NC x 3-3/4" (S/N 171176 up)| SCREW, cap, hex-hd., 5/8-11NC x 3-1/2" (S/N 171176 up), Course Threads| SCREW, cap, hex-hd., 5/8-11 NC x 3-3/4", Course Threads| SCREW, cap, hex-hd., 5/8-11 NC x 3-1/2" (A), Course Threads| 5/8 X 3-3/4 TYPE 5| SCREW, cap, hex-hd., 5/8-11NC x 3-3/4" (note C), Course Threads| - hex, 5/8 x 3-3/4 inch| - hex, 5/8 NC x 3-3/4 inch, if used| SCREW, cap, hex-hd, 5/9-11NC x 3-3/4", Course Threads| SCREW, cap, hex-hd, 5/8-11NC x 3-3/4", Course Threads| BOLT, 5/8 x 3-3/4 znd type 5| NC| HEX HD 5/8 x 3-3/4| hex hd. 5/8" x 3-3/4", Course Threads| hex, 5/8 NC x 3-3/4 inch| HEX HD 5/8 X 3-3/4, Course Threads| hex-hd., 5/8" x 3-3/4", Course Threads| 5/8 NC X 3-3/4 GD 5, ZP| BOLT - hex, 5/8 NC x 3-3/4 inch| hex, brackets to reduction housing, 5/8 NC x 3-3/4 inch, used with 1210 and 1212 tractors (Replaces bolt K601324)| hex, supports to reduction housing, 5/8 NC x 3-3/4 inch (Replaces bolt K601324)| hex, front, 5/8 NC x 3-3/4 inch (Replaces bolt K601324)| - hex, 5/8 NC x 3-3/4 inch, 6 ft secondary wing, double fold, 9 ft wing, vertical fold| BOLT hex, 5/8 NC x 3-3/4 inch| BOLT hex, 5/8 NC x 3-3/4 inch, used on 23 foot through 27 foot wide plows| - hex, 5/8 NC x 3-3/4 inch (Replaces bolt K601324)| 5/8 x 3/4 inch, Course Threads| 5/8 x 3/4 in., Course Threads| BOLT 5/8 x 3-3/4| - hex, 5/8 NC x 3-3/4 inch (Replaces bolt 271730)| BOLT hex, 5/8 NC x 3-3/4 in.| BOLT 5/8 x 3-3/4 in| BOLT 5/8 x 3-3/4 inch| SCREW, 5/8-11 x 3-3/4 C-Z hex-hd cap| SCREW, 5/8-11 x 3-3/4 C-Z hex-hd cap (use as required)| 3/4-10 x 1-3/4 hex-hd, Course Threads| SCREW, 5/8-11 x 3-3/4 hex-hd. cap, Course Threads| 5/8 X 3-3/4" BOLT| 5/8 x 3-3/4"| SCREW, 5/8-11 x 3-3/4 znd hed-hd cap| hex. hd. 5/8" x 3-3/4", Course Threads
Система техники: FRAME, Driveline, Accessories & Attachments / Miscellaneous, FEEDER, BRAKES, ATTACHMENTS/HEADERS, BALE CHAMBER, CHASSIS, PLATFORM, CAB, BODYWORK AND DECALS, Drive Train, COMPLETE MACHINE, CROP STORAGE/UNLOADING, GRAIN TANK & UNLOADER, HYDRAULICS, Power, SUPERSTRUCTURE, Suspension, HYDRAULIC SYSTEM, Mounted Equipment, ENGINE, FRAMES AND BALLASTING, WHEELS, POWER TRAIN, SOIL PREPARATION, CHASSIS/ATTACHMENTS, MISCELLANEOUS, PICKING SYSTEM, Controls, Steering Mechanism, Accessories & Attachments, Basket & Air System

Применяется на технике

385
484
485
248
8580
8590
238
384
943
1026
21026
525
8575
8576
B275
531
541
8840
8850
8825
8825HP
1566
1568
1586
3688
3688HC
3088
3288
886
986

Ещё 165

1086
786
1486
784
785
278
258
584
585
574
2500
474
4400
4450
454
2400
674
785XL
885XL
685XL
485XL
585XL
1660
2366
2344
2388
2365
2377
3488
3788
3388
3588
2826
HYDRO 186
766
HYDRO 100
966
1066
1466
1468
5088
5488
5288
1470
1480
915
815
1460
1440
1680
1456
21456
4390
4390T
715
6590
6590TA
6590T
FARMALL C
SUPER C
1420
350
300
8585
8585CE
8830
8820
425
1680E
2055
230
200
TIGER-MATE
374
2300
354
330 TRUE-TANDEM
RMX370
370 TRUE-TANDEM
340
RMX340
SC414
SC416
SC412
625
3594
3394
276
527B
MRX690
1640
8750
8930
8940
8950
8910
8920
7230
7240
7250
7210
7220
7130
7140
7150
7110
7120
2577
2588
5130
4300
6591T
6591TA
1210
1212
146
5600
5700
770
900
5800
885
885N
685
2022
2044
1400
1620
1644
1666
1688
1640E
2188
2166
2144
DT-414
D-414
1020
1670
4700
428
435
445
153
6500
856
2856
706
2706
100
806
2806
756
2756
544
2544
440
1256
21256
275
375
616
622
364
5140

Сборочные узлы

AUTOMATIC HITCH
HITCH AND JACK ASSEMBLY
MISCELLANEOUS, REAR WHEEL WEIGHTS
CONVEYOR CHAINS
BRAKES, BRAKES AND CONNECTIONS

Ещё 160

PANEL ASSEMBLY - HAY CONDITIONER (LEFT)
PANEL ASSEMBLY - HAY CONDITIONER (RIGHT)
KNOTTER DRIVE & CAM ASSY., 700123341 KNOTTER DRIVE & CAM ASSY. COMPLETE, S.N. CFH0113001-CFH0117286
KNOTTER DRIVE & CAM ASSEMBLY, 700134466 KNOTTER DRIVE & CAM ASSY. COMPLETE, S.N. CFH0117287 & LATER
DRIVE AND CAM ASSEMBLY, PRODUCTION KNOTTER
DRIVE AND CAM ASSEMBLY
DRIVE AND CAM ASSEMBLY, REPLACEMENT KNOTTER
CHASSIS, FRONT AXLE
FEED CONVEYOR CHAINS FOR 825 PLATFORMS
CAB FRAME ASSEMBLY
DRIVE TRAIN, REAR DRIVE AXLE
FRAME, FRONT FRAME CHANNELS
AUTOMATIC HITCH, ATTACHMENT
FRAME, FRONT CHANNELS
THREE POSITION DRAWBAR
STUB EXTENSION WING - USED ON 26 FOOT 3 INCH, THROUGH 35 FOOT 3 INCH MACHINES
STUB EXTENSION WING - USED ON 26 FOOT 3 INCH MACHINE
HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE
GRAIN TANK UNLOADER, BELT DRIVE
FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0253999
FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0174399
FEEDER REVERSER, WITH ROCK TRAP BSN JJC0268799
FEEDER REVERSER, WITH ROCK TRAP - BSN JJC0290299
FEEDER REVERSER, WITH ROCK TRAP; 2365: BSN JJC0245199 / 2366: BSN JJC0177519
UNLOADER, BELT DRIVE
HYDRAULICS, DRAFT SENSING, TRACTOR WITH CATEGORY II, THREE POINT HITCH
HYDRAULICS, HYDRAULIC DRAFT CONTROL
HYDRAULIC, HYDRAULIC DRAFT CONTROL, 1586 TRACTOR WITH SERIAL NO. 2100 AND ABOVE
HYDRAULICS, DRAFT CONTROL, FARMALL TRACTORS W/ S/N 13354 & BELOW, INT'L TRACTORS W/S/N 7664 & BELOW
HYDRAULIC, DRAFT SENSING
HYDRAULICS, DRAFT SENSING
HYDRAULICS, CYLINDER STORAGE HOOK
HYDRAULICS, HYDRAULIC DRAFT CONTROL, 3088, 3288 AND 3688HC TRACTORS
HYDRAULICS, HYDRAULIC DRAFT CONTROL, 3688 TRACTORS
POWER, ENGINE RAILS
POWER, ENGINE RAILS, SERIAL NO. 1500 AND BELOW
POWER, ENGINE RAILS, SERIAL NO. 1501 AND ABOVE
POWER, CRANKCASE OIL PAN, GASKET, OIL DRAIN AND ENGINE MOUNTINGS, DIESEL ENGINES
POWER, ENGINE RAILS, S/N 6540 AND ABOVE
POWER, ENGINE RAILS, S/N 6289 AND ABOVE
GRAIN TANK UNLOADER BELT DRIVE
SUPERSTRUCTURE, TRACTOR CAB AND CONNECTIONS
SUPERSTRUCTURE, CUSTOM TRACTOR CAB AND CONNECTIONS
FRAME AND ENGINE MOUNTS
SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, ADJUSTABLE AXLE
HYDRAULIC SYSTEM, CYL. BLOCK & HEAD, PISTONS, RODS, REGULATOR & CHECK VALVES & CONNECTIONS
HYDRAULIC SYSTEM, TOUCH-CONTROL ROCKSHAFT, 3-ARM ROCKSHAFT ARMS, BEARINGS, OPERATING LINK & BRACE
HYDRAULIC SYSTEM, TOUCH-CONTROL ROCKSHAFT, 4-ARM ROCKSHAFT ARMS, BEARINGS, OPERATING LINK & BRACE
HYDRAULIC SYSTEM,TOUCH-CONTROL, 3-ARM, ROCKSHAFT, ROCKSHAFT ARMS, BEARINGS,OPERATING LINK AND BRACE
HYDRAULIC SYSTEM,TOUCH-CONTROL, 4-ARM, ROCKSHAFT, ROCKSHAFT ARMS,BEARINGS,OPERATING LINK AND BRACE
FEEDER JACKSHAFT DRIVE
CHASSIS, CLUTCH CONTROLS AND TORQUE AMPLIFIER CONTROLS
TONGUE, HITCH, JACK AND SAFETY CHAIN ASSEMBLIES
SWAYBAR MOUNTING ASSEMBLY, LEFT
SWAYBAR MOUNTING ASSEMBLY, RIGHT
SWAYBAR ASSEMBLY, LEFT
SWAYBAR ASSEMBLY, RIGHT
ENGINE RAILS AND SUPPORTS, DTI466C DIESEL ENGINE
ENGINE RAILS AND SUPPORTS, DTI-466C DIESEL ENGINE
ENGINE SUPPORTS
ENGINE RAILS AND SUPPORTS, DT466B ENGINE
HYDRAULIC SYSTEM, TOUCH-CONTROL SYSTEM, FARMALL 200 TRACTORS, ROCKSHAFT AND SUPPORTS, 3 ARM
FEEDER, FEEDER JACKSHAFT DRIVE
FEEDER, FEEDER REVERSER, MACHINES WITH OUT ROCK TRAP
DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2
DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2
54-1/2 THROUGH 60-1/2 DOUBLE FOLD MAIN FRAME AND TRUSSES
FRONT AXLE
PIVOT STABILIZING WHEEL 2008 AND AFTER UNITS
GAUGE WHEEL PARTS 2008 AND AFTER UNITS
GAUGE WHEEL PARTS 2009 AND AFTER UNITS 19 THROUGH 34 FOOT ONLY
GAUGE WHEEL PARTS 2009 AND AFTER - 37 FOOT ONLY
PANEL ASSEMBLY, HAY CONDITIONER, LEFT
PANEL ASSEMBLY, HAY CONDITIONER, RIGHT
TRANSMISSION HOUSING
KNOTTER DRIVE AND CAM ASSEMBLY, 700123341 KNOTTER ASSEMBLY COMPLETE, INCLUDES PAGES 6-6 THRU 6-13
DRIVE AND CAM ASSEMBLY , CENTRALIZED LUBE
REAR WHEEL WEIGHT ATTACHMENT
WEIGHTS, REAR WHEEL
SHANKS
SHANK ASSEMBLY
TONGUE AND TONGUE HYDRAULIC ASSEMBLIES
THREE POINT HITCH HYDRAULICS
UNLOADER, BELT DRIVE, 2.5 BU/SEC
UNLOADER, BELT DRIVE, 2.5 BU/SEC- 5130
6 FOOT WING FRAME
FRAME, RADIATOR SUPPORT AND ENGINE MOUNTS
FRONT WING LIFT HINGE, FLAT FOLD, RIGID
FENDERS, FRAME PLATFORMS AND ROPS ATTACHMENT, 1210, 1210 FOUR-WHEEL DRIVE AND 1212 TRACTORS
REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, RIGID
FRONT WING LIFT HINGE, FLAT FOLD, FLOATING
REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, FLOATING
FRONT SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, RIGID
REAR SECONDARY WING LIFT HINGE, LOW TRANSPORT, DOUBLE FOLD, RIGID
FRONT SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, FLOATING
REAR SECONDARY WING LIFT HINGE, LOW TRANSPORT, DOUBLE FOLD, FLOATING
FRONT SECONDARY WING LIFT HINGE, STANDARD TRANSPORT, DOUBLE FOLD, RIGID
REAR SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, STANDARD TRANSPORT, DOUBLE FOLD, RIGID
FRONT & REAR SECONDARY WING LIFT HINGES & CYLINDER MOUNTING, STD TRANSPORT, DOUBLE FOLD, FLOATING
CAB FLOOR AND MOUNTING, 1210Q, 1210Q FOUR-WHEEL DRIVE AND 1212Q TRACTORS FOR EUROPE ONLY
CAB FLOOR AND MOUNTING, SEKURA CAB, TRACTORS FOR EUROPE ONLY
CASTER WHEEL MOUNTING
BEAM AND SHANK WITH GAUGE WHEELS
WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE
WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE
WING LIFT INGES - FRONT, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE
WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE
SECONDARY WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE
SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE
SECONDARY WING LIFT HINGES - FRONT, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE
SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE
GAUGE WHEEL MOUNTING - SLIDE ADJUSTING, MOUNTED FORWARD ON FRONT BEAM, ALL DIRECT MOUNTED MODELS
LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, LEVEL LIFT MODELS, FLAT FOLD
FRONT FURROW WHEEL AND LEVELING SCREW, 1975 AND AFTER
COU-TILL ATTACHMENT, CYCLO AIR & PLATE TRAILING, ALL ROW SIZES
FRONT WING LIFT HINGE, FLAT FOLD - RIGID, 19 FOOT THROUGH 23
REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD -
FRONT WING LIFT HINGE, FLAT FOLD - FLOATING, 25 FOOT AND 27
FRONT SECONDARY WING LIFT HINGE, DOUBLE FOLD - RIGID, 43
CAB FLOOR AND MOUNTINGS, 885Q, 885QH AND 885SK TRACTORS
REAR SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING
FRONT AND REAR SECONDARY WING LIFT HINGES, AND CYLINDER
CASTER WHEEL MOUNTING, 12 FOOT WING VERTICAL FOLD, 6 FOOT
LEVEL LIFT HITCH, BRACES AND BEAMS, FLAT FOLD
AUTOMATIC HITCH - 485XL : -767, 585XL : -3335
AUTOMATIC HITCH, 685 : -13595 885 : -3401
AUTOMATIC HITCH, 685 : 18001-, 885 : 18001-
FEEDER REVERSER, WITH ROCK TRAP
DRUM ROTOR AND DRIVE CAMS
CROSS AUGER DRIVE
FEEDER REVERSER, WITHOUT ROCK TRAP
FEEDER REVERSER, WITH ROCK TRAP, - JJC0268799, - JHF0032175
ENGINE RAILS, COMBINES WITH D-414 ENGINES AND SERIAL NUMBERS PRIOR TO 18001
MAIN FRAME SUPPORTS
GRAIN TANK UNLOADER BELT DRIVE, SERIAL NUMBER - JJC0114000
GRAIN TANK UNLOADER BELT DRIVE, SERIAL NUMBER JJC0114001 -
GRAIN TANK UNLOADER BELT DRIVE, JJC0100028 -
GRAIN TANK UNLOADER BELT DRIVE, PRIOR TO P.I.N. JJC0115352
GRAIN TANK UNLOADER, BELT DRIVE, P.I.N. JJC0102897 & AFTER, AND MODELS WITH EXTENDED LENGTH CLEANING SYSTEM
GRAIN TANK UNLOADER BELT DRIVE, P.I.N. JJC0097103 AND AFTER
GRAIN TANK UNLOADER BELT DRIVE, P.I.N. JJC0096043 AND AFTER
GRAIN TANK UNLOADER BELT DRIVE, P.I.N. JJC0115352 AND AFTER
MAIN FRAME ROCKSHAFT AND DEPTH CONTROL MACHINES WITH AXLE PIVOT THRU AXLE TUBE
TRAILER HITCH ATTACHMENT
TOOLING EQUIPMENT, VIBRA SHANK TOOLING, 1970 TO 1976, FOR UNITS F, G, M, N, R, S, T AND V
HITCH
POWER TRAIN, DIFFERENTIAL LOCK
POWER TRAIN, FINAL DRIVE, COUNTERSHAFT AND CARRIER, TRACTORS WITH COTTON PICKER
SPRING CUSHION HITCH
HYDRAULIC SYSTEM, DRAFT CONTROL
HYDRAULICS SYSTEM, HYDRAULIC CYLINDER STORAGE HOOK
HYDRAULICS SYSTEM, DRAFT SENSING
TRAILER HITCH ATTACHMENT, WHEN ORDERED
CONTROLS, BRAKES
CONTROLS, PLATFORM DRIVE CONTROL
STEERING MECHANISM, ADJUSTABLE WIDE TREAD FRONT AXLE, INTERNATIONAL TRACTORS
PARTS ACCESSORIES AND ATTACHMENTS, TRACTOR CAB AND CONNECTIONS, EXCEL CABS
BASKET AND AIR SYSTEM, BASKET SUPPORTS
UNLOADER BELT DRIVE ASSY (CONT.); (VAR) 425200005, 425200015, 425200686, 425200696
UNLOADER BELT DRIVE ASSY

Заменён на

16445

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.