Болт, Hex, 5/16" - 18 x 3/4", Gr 5 — фото недоступно

Болт, Hex, 5/16" - 18 x 3/4", Gr 5 McC413-512

Артикул: McC413-512
Наличие: Под заказ
Предложений: 1
Производитель: Case IH

Цена за штуку 69 ₽

Цена с НДС

актуально на момент последнего обновления каталога

Кол-во

Введите нужное количество и нажмите «Уточнить наличие» — цена и сроки поставки обновятся.

Итого за 1 шт. 69 ₽

Купить

Доступные предложения

Склад Уфа 69 ₽ Остаток по запросу: 0 шт.

Нет в наличии

По каталогу Case IH

Название: Болт, Hex, 5/16" - 18 x 3/4", Gr 5
Название (EN): BOLT,Hex, 5/16" - 18 x 3/4", Gr 5
Номер в каталоге: 413-512
Размеры и исполнение: 2 REQUIRED FAST SPEED - 4 REQUIRED SLOW SPEED| - hex, 5/16 x 3/4 inch| Model 844XL| Model 845XL| C Hex, 5/16"-18 x 3/4", G5, Full Thd| (Vis à tête hexagonale 7.9 x 19 mm gros filet (NC)) Hex, 5/16"-18 x 3/4", G5, Full Thd| 5/16 x 3/4 in| 5/16 x 29 mm| C| If Used| - hex, 5/16 NC x 3/4 inch| - JAF0040227| - JAF0276092| North American Models, JAF0238056 -| REF 12 - 20 Used For Loader Control Lock| 5/16 x 1| D100XR Backhoe Only| D100XR Backhoe Only; Used on models with Kontak or Dukes valve| Used on foot guards with weld on type nuts| See Page(s) 9A-105, REF 32| Used With 1541638C1| (Boulon à tête hexagonale 7.9 x 19 mm gros filet (NC)) Hex, 5/16"-18 x 3/4", G5, Full Thd| - hex, 5/16 NC x 3/4 inch, used with 9250 and 9260 tractors| If used| hex, 5/16 NC x 3/4 inch| - hex, 5/16 NC x 3/4 inch (Replaces bolt 180077)| - hex, 5/16 NC x 3/4 inch (Replaces bolt 5 180077)| 20719 #4210(2) 4220(2) 4230(2)| 3230| - hex, 5/16 NC x 3/4 inch, bracket to front extension| - hex, 5/16 NC x 3/4 inch, Not shown| - oil pan, hex, 5/16 NC x 3/4 inch (Replaces bolt 179816)| - hex, 5/16 NC x 3/4 inch (Replaces bolt 179816)| - hex, 5/16 NC x 3/4 inch (Replaces bolt K602803)| BOLT - hex, 5/16 NC x 3/4 inch| For models 238, 248, 395, 495| Quick coupling| hex, 5/16 NC x 3/4 inch, Pad 1| - hex, 5/16 NC x 3/4 inch (Pad 1)| BOLT - hex, 5/16 NC x 5/8 inch| Without Straw Chopper| Grain tank harness| Unloader lamp harness| - hex, 5/16 NC x 3/4 inch, pulley to pump (Replaces bolt K602803)| (Replaces bolt 179822)| BOLT - hex, 5/16 NC x 3/4 inch (Replaces bolt 179816)| (Replaces screw K602803) Hex, 5/16"-18 x 3/4", G5, Full Thd| - hex, 5/16 NC x 3/4 inch, used with all machines except 1400 cotton harvesters and 1420 combines (Replaces bolt 179816)| - hex, 5/16 NC x 3/4 inch (Use on 5000)| 12 Ft| 14 Ft| 16 Ft| - hex, 5/16 NC x 3/4 inch, anchor to compensator beam (Replaces bolt K602803)| hex, 5/16 NC x 3/4 inch, remote hydraulic cylinder attaching parts| Stirrup to platform Hex, 5/16"-18 x 3/4", G5, Full Thd| - hex, 5/16 NC x 3/4 inch, (6 used on 12 foot)| - hex, 5/16 NC x 3/4 inch, grade 5| - hex, 5/16 NC x 3/4 inch, without dump valve (Replaces bolt K602803)| - hex, 5/16 inch - 18 NC x 3/4 inch (Replaces bolt 180077)| - hex, 5/16 NC x 3/4 inch, brackets to fenders (Replaces bolt K602803)| - hex, 5/16 NC x 3/4 inch, stirrups to platforms (Replaces bolt K602803)| - hex, 5/16 NC x 3/4 inch (Replaces 140996C1)| hex, 5/16 NC x 3/4 inch, Used on D100XR backhoe only| - hex, 5/16 NC x 5/8 inch| hex, 3/8 NC x 3/4 in.| - hex, 5/16 NC x 3/4 inch, used with item 55 only, not shown| - hex, 5/16 NC x 3/4 inch, used with item 19 only| Drum Number 1 And 4| - hex, 5/16 NC x 3/4 inch, see page 9A-64, item 32| - hex, 5/16 NC x 3/4 inch, see page 9A-57| - hex, 5/16 NC x 3/4 inch, Parts list page 9A-65, drum housing, service kit| - hex, 5/16 NC x 3/4 inch, Used with 12 row narrow vertical fold units| Models 745, 844 and 845 only| - hex, 5/16 inch NC| Grain auger trough| Used with 1541638C1 trough| - hex, 5/16 NC x 3/4 inch, used with trough 1541638C1| Use with P/N 1541638C1| Used with 1541638C1| - hex, 5/16 NC x 3/4 inch, grade 2| - round head square neck, 5/16 NC x 3/4 inch
Система техники: MAIN GEARBOX & DRIVE, HITCHES, DRAWBARS & IMPLEMENT COUPLINGS, ATTACHMENTS/HEADERS, PLATFORM, CAB, BODYWORK AND DECALS, Drive Train, ENGINE, ELECTRICAL SYSTEMS, Driveline, ENGINE EQUIPMENT, IMPLEMENT POWER TAKE OFF, MAIN GEARBOX, PRODUCT FEEDING, ELECTRICAL, FUEL SYSTEM, TYING/WRAPPING, BALE EJECTOR, FEEDER, POWER TRAIN, BALE CHAMBER, MAIN FRAME, BRAKES, CHASSIS, HYDRAULIC SYSTEMS, HYDRAULICS, SHEET METAL/DECALS, SHEET METAL, CLEANING, THRESHING, Decals & Attachments, CHASSIS/ATTACHMENTS, PICKING SYSTEM, ROTOR, CONCANVES & SIEVE, BEATER & CLEANING FANS, GRAIN ELEVATORS & AUGERS, BASKET, GRAIN TANK & UNLOADER, STRAW SPREADER & CHOPPER, Power, SUPERSTRUCTURE, Accumulator, OPERATOR'S PLATFORM/CAB, CAB, CROP STORAGE/UNLOADING, RESIDUE HANDLING, ACCESSORIES, COMPLETE MACHINE, STEERING, TRACKS/STEERING, CHASSIS ATTACHMENTS, HANDLING SYSTEM, CAB & AIR CONDITIONING, SEPARATION

Применяется на технике

RBX441
RBX451
RBX561
HDX141
HDX181
HDX121
HDX161
RBX461
SBX530
SBX520
SBX540
385
485
248
1660
1845C
1840
AFS
8575
8576
844XL
845XL
8580
2555
CPX620
CPX610
8590
420
CPX420
WDX1002S

Ещё 210

WDX1202
WDX1202S
F-235
8840
FHX300
1640
1680
2388
2366
2377
2365
2344
620
8555
420 TIER 3
F-235D
8880
8870
8850
8825
8825HP
90XT
85XT
95XT
75XT
40XT
60XT
70XT
SCX100
8420
770
1044
1064
1084
1063
1083
1455
1255
1255XL
1455XL
484
8581
WDX1902
WDX2302
WD1203
WD1903
WD2303
744
844
644
844S
9240
9250
9260
9210
9230
7130
7140
7150
7210
7220
7230
7240
7250
1818
1670
1400
1800
2022
9350
9270
9280
1835C
4230
4240
4210
4220
3210
3220
3230
885
885N
8585
1825B
1825
2044
495
395
8585CE
425
9310
9330
8360
8370
D-282
7110
7120
8545
8830
238
595
258
268
695
795
1838
288
895
4000
5000
3594
2394
8380
2594
3394
D-301
SC414
625
SC416
8340
8320
8330
1822
1844
DHX181
DHX361
DHX211
DHX301
DHX251
61MS
635
2016
2015
72MS
8910
8920
8930
8940
8950
950
900
1682
1688
743
745S
845
1644
1666
856XL
2055
955
2166
2188
2144
1640E
D-236
D-310
1210
1212
2577
2588
DCX101
D-358
2155
5088
6130
6088
7088
DT-407
D-407
8820
8435
8465
5130
DT-361
D-361
1010
310
144T
1896
2096
1120
8455
1130
1140
8350
8480
8465T
8460
8455T
9150
9110
9130
9170
9180
1620
1020
540
640
740
940
840
1124
5140
6140
4130
CE630
5150
4150
6150

Сборочные узлы

MAIN DRIVE GEARBOX, 540 RPM
GEARBOX, MAIN DRIVE, 540 RPM
GEARBOX, MAIN DRIVE, 1000 RPM
WINDROW SHIELDS
SHIELDS, RH

Ещё 806

SHIELDS, LH
GEAR SHIFT MECHANISM - SPEED TRANSMISSION, 385 485 SLOW & FAST SPEED
STEERING AXLE SHIELD, STATIONARY, EXTENDED LENGTH CLEANING SYSTEM
STEERING AXLE SHIELD, STATIONARY, EXTENDED LENGTH CLEANING
RADIATOR - COOLANT RECOVERY SYSTEM
RADIATOR - OIL COOLER
COVER, AFS CONTROL CENTER
FLYWHEEL BRAKE ASSEMBLY
MANIFOLDS
CONTROL ASSEMBLY, AFS CONCORD
COLD START SYSTEM (NORTH AMERICA)
ETHER START SYSTEM
ETHER START SYSTEM - BSN Y6T011701
AIR INTAKE & EXHAUST SYSTEM
GEARBOX, MAIN DRIVE
FAN - WATER PUMP - WATER OUTLET ELBOW - THERMOSTAT AND BYPASS
OIL PUMP - OIL GAUGE AND PRESSURE GAUGE
AIR BREATHER AND EXHAUST ASSEMBLY
GEARBOX, REVERSING
FEEDER SHIELDING, SBX530
FEEDER SHIELDING, SBX540
COMBINE HARNESS, FOR 1600 COMBINES
BATTERY
ELECTRICAL WIRING AND SENSOR ASSEMBLY
HARNESS AND SENSORS, FOR 1600 COMBINES, PRIOR TO 1994
HARNESS AND SENSORS, FOR 1600 COMBINES, 1994 AND AFTER
FRONT HARNESS - INSTRUMENT CLUSTER, - JAF0286784
HARNESS AND SENSORS, FOR 2100 COMBINES, 1995 AND AFTER
FRONT HARNESS - INSTRUMENT CLUSTER, JAF0286785 -
1020 HEADER HARNESS, PRIOR TO JJC0215000
HARNESS - INSTRUMENT CLUSTER, JAF0040228 - JAF0277352
HARNESS - INSTRUMENT CLUSTER, JAF0277353 -
WINDSCREEN WASHER UNIT
ALARM, BACKUP (NORTH AMERICA)
HARNESS, LEFT HAND SIDE
BACKUP ALARM
SEED DRUM DRIVE (955 TRAILING AFS PLANTER - 1999, 12 ROW AND 16 ROW NARROW AND 12/23 SRC)
TWISTER FRAME, WIRE
HOLDING FINGER ASSEMBLY
HOLDING FINGER ASSEMBLY, STUFFER CHAMBER
OIL COOLER SYSTEM
OIL COOLER - HYDRAULIC COOLER BYPASS
TANDEM PUMP LINKAGE
LOADER CONTROLS, MODELS WITH HAND CONTROLS
LOADER CONTROLS, MODELS WITH FOOT CONTROLS
CAM ASSEMBLY
SHUTTLE AND DRIVE ASSEMBLY
AXLE - SPACERS
AXLE SPACERS
LIGHTING SYSTEM
FLYWHEEL PROTECTION, AUSTRALIA
FEEDER & HOUSING, RH, AUSTRALIA
HOUSING, LH, AUSTRALIA
BALE EJECTOR ASSEMBLY
MAIN SHIELDS ASSEMBLY-LEFT
PARKING LATCH - SEAT BARS, DUAL, - JAF0100496
PARKING LATCH - SEAT BAR, DUAL, - JAF0040227
MAIN SHIELDS ASSEMBLY-RIGHT
CONTROLS ASSEMBLY (OPERATOR'S)
DOOR ASSEMBLY
PARKING LATCH - SEAT BARS, DUAL, JAF0100497 -
PARKING LATCH - SEAT BAR, DUAL, JAF0040228 - JAF0103651
GLASS ASSEMBLY - RIGHT AND REAR
PARKING LATCH - SEAT BAR, DUAL, JAF0103652 -
SHIELDS ASSEMBLY, LEFT
SHIELDS ASSEMBLY, RIGHT
SHIELDS AND TWINE BOX ASSEMBLY - RIGHT
GLASS ASSEMBLY (RIGHT AND REAR)
CONTROLS ASSEMBLY, OPERATOR'S
WHEEL, HUB AND AXLE ASSEMBLY
CONTROL ASSEMBLY, OPERATOR'S
HEADER LIFT HYDRAULIC ASSEMBLY
HYDRAULIC BALE DENSITY ASSEMBLY
HYDRAULIC SYSTEM - COUPLER
HEADER HYDRAULIC LIFT ASSEMBLY
DRUM BAR LUBRICATION RESERVOIR SYSTEM
DRUM BAR LUBRICATION RESERVOIR SYSTEM -JJC0157275
DRUM BAR LUBRICATION RESERVOIR SYSTEM JJC0157275-
MANIFOLD VALVE AND MOUNTING
CONTROLS - LOADER (HAND OPERATED)
CONTROLS - LOADER (FOOT OPERATED)
HYDRAULIC SYSTEM - BACKHOE BOOM CYLINDER (NORTH AMERICA)
HYDRAULIC SYSTEM - BACKHOE DIPPER CYLINDER (NORTH AMERICA)
BASKET LIFT CYLINDER SYSTEM
HYDRAULIC SYSTEM - BACKHOE BOOM CYLINDER (NORTH AMERICA), D100XR
HYDRAULIC SYSTEM - BACKHOE BOOM CYLINDER (D125)
HYDRAULIC SYSTEM - BACKHOE DIPPER CYLINDER (D125)
HYDRAULIC SYSTEM BACKHOE BOOM CYLINDER NORTH AMERICA, D125 BACKHOE, WITH TUBES AT CONTROL VALVE
HYDRAULIC SYSTEM BACKHOE DIPPER CYLINDER NORTH AMERICA, D125 BACKHOE, WITH TUBES AT CONTROL VALVE
HYDRAULIC SYSTEM - BACKHOE BOOM CYLINDER (NORTH AMERICA), D125
HYDRAULIC SYSTEM - BACKHOE BOOM CYLINDER (NORTH AMERICA), D125 BACKHOE, WITH TUBES AT CONTROL VALVE
HYDRAULIC SYSTEM - BACKHOE DIPPER CYLINDER (NORTH AMERICA), D125 BACKHOE, W/TUBES AT CONTROL VALVE
HYDRAULIC SYSTEM BACKHOE BOOM CYLINDER NORTH AMERICA, D125 BACKHOE W/ TUBES AT CONTROL VALVE
HYDRAULIC SYSTEM BACKHOE DIPPER CYLINDER NORTH AMERICA, D125 BACKHOE W/ TUBES AT CONTROL VALVE
GRAIN AUGER TROUGH, EXTENDED LENGTH CLEANING SYSTEM
TAILINGS AUGER TROUGH PANEL, EXTENDED LENGTH CLEANING SYSTEM
BALE EJECTOR KIT, HK40835 COMPLETE, INCLUDES PGS 9-22 THRU 9-27 TO BE ORDERED THRU WHOLEGOODS ONLY
1044 HEADER DRIVE SHAFT
1064, 1084 HEADER DRIVE SHAFT
1063 HEADER DRIVE SHAFTS
1083 HEADER DRIVE SHAFTS
WARNING LIGHT KIT
SEAT, MOUNTING (STANDARD) - SEAT BELTS (MODELS WITHOUT EMISSIONS CERTIFIED ENGINE)
SEAT, MOUNTING (STANDARD) - SEAT BELTS (MODELS WITH EMISSIONS CERTIFED ENGINE)
SEAT, MOUNTING - SUSPENSION (MODELS WITH EMISSIONS CERTIFIED ENGINE)
SEAT, MOUNTING (DELUXE) - SEAT BELTS (MODELS WITHOUT EMISSIONS CERTIFIED ENGINE)
SEAT, MOUNTING (DELUXE) - SEAT BELTS (MODELS WITH EMISSIONS CERTIFIED ENGINE)
MULCHER ATTACHMENT, ADJUSTABLE ANGLE, UNITS BUILT PRIOR TO 1980
CHASSIS
SEAT, MOUNTING - NON-SUSPENSION (NORTH AMERICA), - JAF0040227
SEAT, MOUNTING - NON-SUSPENSION (NORTH AMERICA), JAF0040228 -
SEAT, MOUNTING - NON-SUSPENSION, 4-390 EMISSIONS CERTIFIED ENGINE
SEAT, MOUNTING - SUSPENSION (NORTH AMERICA), - JAF0040227
SEAT, MOUNTING - SUSPENSION (NORTH AMERICA), JAF0040228 - JAF0238055
SEAT, MOUNTING - SUSPENSION
REAR WINDOW AND SCREEN CANVAS (NORTH AMERICA)
SEAT, MOUNTING (STANDARD) - SEAT BELTS (NORTH AMERICA)
SEAT, MOUNTING - SUSPENSION, 4-390 EMISSIONS CERTIFIED ENGINE
CANOPY, ROPS - FRAME AND PANELS (NORTH AMERICA), JAF0040228 -
FENDERS - SUPPORT, FRONT, - JAF0040227
SPECIAL PARTS FOR GERMANY - TBG APPROVED, JAF0098065 -
SPECIAL PARTS FOR GERMANY - TBG APPROVED
FOPS/ROPS AND ROPS - PUNCHED (EUROPE)
SPECIAL PARTS FOR ITALY - DGM, BUCKET LOCKOUT
FOPS/ROPS AND ROPS - GLAZED (EUROPE)
BACKHOE - CONTROL TOWER (NORTH AMERICA)
BACKHOE - SEAT AND FOOT SHIELDS (NORTH AMERICA)
BACKHOE - SEAT MOUNTING (D100)
LIFT BRACKETS
BACKHOE - CONTROL TOWER (NORTH AMERICA) D125
BACKHOE - CONTROL TOWER (D125)
BACKHOE - SEAT AND FOOT SHIELDS (NORTH AMERICA) D125
BACKHOE - SEAT AND FOOT SHIELDS (D125)
BACKHOE SEAT AND FOOT SHIELDS NORTH AMERICA, D125 BACKHOE
BACKHOE - SEAT MOUNTING (D100, D100XR)
BACKHOE CONTROL TOWER NORTH AMERICA, D125 BACKHOE
BACKHOE - SWING TOWER AND BOOM (D100 OR D100XR)
BACKHOE - SEAT & FOOT SHIELDS (NORTH AMERICA), D125 BACKHOE
BACKHOE SEAT AND FRAME NORTH AMERICA, D125 BACKHOE
BACKHOE - SEAT & FRAME (NORTH AMERICA), D125 BACKHOE
SPECIAL PARTS FOR ITALY - BUCKET LOCKOUT; LOCK, LOADER CONTROL
BACKHOE - SEAT MOUNTING, D100, D100XR (NORTH AMERICA)
BACKHOE - SWING TOWER AND BOOM, D100, D100XR (NORTH AMERICA)
BACKHOE - CONTROL TOWER, D125 (NORTH AMERICA)
BACKHOE - SEAT AND FOOT SHIELDS, D125 (NORTH AMERICA)
TAILINGS AUGER TROUGH, EXTENDED LENGTH CLEANING SYSTEM
WIRING DIAGRAM AND ELECTRICAL EQUIPEMENT
FEEDER - SHIELDS, JACKSHAFT DRIVE
FEEDER - SHIELDS, JACKSHAFT DRIVE - BSN JJC0253999
FEEDER - SHIELDS, JACKSHAFT DRIVE; 2365: BSN JJC0245199 / 2366: BSN JJC0177519
FEEDER - SHIELDS, JACKSHAFT DRIVE - BSN JJC0174399
FEEDER - SHIELDS, JACKSHAFT DRIVE - ASN JJC0254000
FEEDER - SHIELDS, JACKSHAFT DRIVE ASN JJC0268800
FEEDER - SHIELDS, JACKSHAFT DRIVE; 2365: ASN JJC0245200 / 2366: ASN JJC0177520
DRUM ROTOR SUPPORTS AND SHAFT
DOFFER
MOISTENER STAND
PLANT COMPRESSOR - BSN JJC0250100
PLANT COMPRESSOR - ASN JJC0250100
PLANT COMPRESSOR
PLANT COMPRESSOR - BSN JJC0249565
PLANT COMPRESSOR - BTW JJC0249565 & JJC0249826
PLANT COMPRESSOR - ASN JFG010001
DRUM HOUSING
ROTOR DRIVE - MOUNTING
SIDE SHEETS
HOODSHEETS AND SUPPORTS
HOOD SHEET SUPPORTS AND SIDE SHEETS
CLEANING FAN - DRIVE SPEED CONTROL
GRAIN AUGER TROUGH
TAILINGS AUGER TROUGH
TAILINGS AUGER TROUGH PANEL AND GATE - MODELS WITH STRAW SPREADER
BASKET, RIGHT HAND SIDE
BASKET DOOR
BASKET DOOR - COVERS AND SHIELDS - BSN JFG010001
BASKET DOOR, COVERS AND SHIELDS
BASKET, RIGHT HAND DECAL PANEL
GRAIN TANK EXTENSIONS
SHIELDS, ENGINE AND RADIATOR - REAR ACCESS DOOR AND SUPPORTS
STRAW CHOPPER - HOUSING, GEAR
HYDRAULIC TRAILER BRAKE - 385 / 485
HYDRAULIC TRAILER BRAKE - 484
CAMSHAFT AND RELATED PARTS
CRANKCASE SIDE COVER
CRANKCASE AND RELATED PARTS
LUBRICATING OIL PUMP
BOSTROM SUSPENSION SEAT - DE-LUXE, LOW BACK
SAFETY CAB
HEATER FEED AND RETURN PIPES, SEKURA ROOF HEATER
BALE WEIGHT KIT, (CON'T), BALER S.N. CFH0026001 THRU CFH0026652
BALE WEIGHT KIT, (CON'T)
BALE WEIGHT KIT, (CON'T), BALER S.N. CFH0026653 AND LATER
AIR CONDITIONER/HEATER & PLUMBING
GENERATOR, PULLEYS AND SUPPORTS
HEADLIGHTS - SIDE LIGHTS - REAR RED LIGHTS, LICENSE PLATE
TONGUE & JACK
STRAW CHOPPER GEAR HOUSING
GENERATOR - PULLEYS AND SUPPORTS - VOLTAGE REGULATOR
GEARBOX
DIA KIT, HYDRAULIC HITCH
CLUTCH (FERODO)
FOOT BRAKE , 664/744/844, IF SO EQUIPPED
BRAKE LINES , 744/844/844S, IF SO EQUIPPED
SHIFTER MECHANISM, TRANSMISSION COVER
RADIATOR MOUNTING, 9240 TRACTOR
RADIATOR MOUNTING, 9250 AND 9260 TRACTOR
RADIATOR AND ATTACHING PARTS, 9250 AND 9260 TRACTORS, PRIOR TO P.I.N. JEE0033501
ETHER STARTING SYSTEM
AIR INDUCTION SYSTEM, 9240 TRACTOR
AIR INDUCTION SYSTEM, 9250 AND 9260 TRACTOR
ETHER STARTING SYSTEM, USED WITH 9240 TRACTOR
RADIATOR, DIESEL MODELS
RADIATOR AND FAN SHROUD
RADIATOR AND FAN SHROUD, 2022 COTTON PICKER
RADIATOR MOUNTING
RADIATOR, HOSES, SHROUD AND OIL COOLER
EXHAUST SYSTEM
EXHAUST SYSTEM, MUFFLER SUPPORT, REF. TWO, IS BOLTED TO FRONT FRAME
EXHUAST SYSTEM, MUFFLER SUPPORT IS WELDED TO FRONT FRAME
WATER PUMP CARRIER, COOLANT MANIFOLD AND CONNECTIONS
OIL BATH AIR CLEANER, 4210, 4220, 4230, WITHOUT CAB
OIL BATH AIR CLEANER, 3230, WITHOUT CAB
AIR CLEANER
AIR CLEANER AND MOUNTING PARTS
RADIATOR AND ENGINE SHIELDS
TONGUE, DRIVE SHAFT, MOUNTING AND SHIELD ASSEMBLIES
RADIATOR & MOUNTING PARTS, GASOLINE MODELS, BEFORE P.I.N. JAF0096438
RADIATOR AND FAN SHROUD, 2044 COTTON PICKER
CYLINDER BLOCK, SIDE COVER AND FLYWHEEL HOUSING
CAMSHAFT
OIL PUMP
RADIATOR & MOUNTING PARTS, GASOLINE MODELS, P.I.N. JAF0096438 AND AFTER
RADIATOR SCREENS
REEL AND DRAPER DRIVE ASSEMBLIES
ENGINE SHROUD, GASOLINE MODELS
CHAINBOX, AUGER DRIVE ASSEMBLY
OIL PAN AND GASKET, 403 AND 615 COMBINES
OIL PAN AND GASKET, ALL MACHINES EXCEPT 403 AND 615 COMBINES
OIL COOLER AND SUPPORT
CYLINDER BLOCK AND COVERS
GEARBOX ASSEMBLY (700119392 GEARBOX ASSEMBLY COMPLETE)
ENGINE MOUNTING
AUGER DRIVE CHAINBOX ASSEMBLY, 12 FOOT
AUGER DRIVE CHAINBOX ASSEMBLY, 14 FOOT
OIL BATH AIR CLEANER
RADIATOR, HOSES, AND OIL COOLER
CYLINDER BLOCK AND RELATED PARTS (3 CYL) 238, 248, 395, 495
CYLINDER BLOCK AND RELATED PARTS / CYLINDER BLOCK SIDE COVER / FLYWHEEL HOUSING
CYLINDER BLOCK AND RELATED PARTS (4 CYL) 258, 595
EXHAUST SYSTEM, GASOLINE MODELS
CAMSHAFT 258, 595
ENGINE OIL FILTER AND LINES, GASOLINE MODELS ONLY
FAN AND FAN BELT, D-239 DIESEL ENGINE
THERMOSTAT AND WATER PUMP, D-239 DIESEL ENGINE
CYLINDER HEAD, D-239 DIESEL ENGINE
CAMSHAFT, D-239 DIESEL ENGINE
CRANKCASE ASSEMBLY, D-239 DIESEL ENGINE
TANK HOUSING, LIFT ARM & SHAFT, LOCKING & LEVERS SYSTEM, TRAINERS, OIL FILTER
TANK HOUSING, COVER, LIFT ARM & SHAFT, OIL FILTER, CONTROL LEVERS & LINKAGE
REAR LIGHT, FARMALL F-235 & F-235-D
QUICK COUPLING, SELF SEALING COUPLING
CAMSHAFT, VALVE LEVER SHAFT
CRANKCASE - 3144742R92
TIMING GEAR COVER AND INJECTION PUMP DRIVE, 504BDT DIESEL ENGINE
THROTTLE CONTROLS, ENGINE ATTACHING PARTS
THROTTLE CABLE BRACKETS, USED WITH 9240 TRACTOR
FUEL TANK AND FUEL LINES
SICKLE AND GUARD ASSEMBLY, RANGE GUARD, 12 FOOT
SICKLE AND GUARD ASSEMBLIES
FUEL TANK AND PIPING, WITHOUT CAB
SICKLE AND GUARD ASSEMBLY, RANGE GUARD, 14 FOOT
SICKLE AND GUARD ASSEMBLIES, 12 FOOT
CRANKCASE FRONT COVER AND IDLER GEAR / OIL PAN AND GASKET
SICKLE AND GUARD ASSEMBLIES, 14 FOOT
HOLDDOWN AND GUARD ASSEMBLY, RANGE GUARD, 14 FOOT
THROTTLE CONTROL
DIESEL ENGINE CONTROLS, MODELS WITHOUT CROSSOVER SHAFT
HOLDDOWN AND GUARD ASSEMBLY, RANGE GUARD, 16 FOOT
THROTTLE CONTROLS, ENGINE ATTACHMENT
GASOLINE ENGINE CONTROLS, PRIOR TO P.I.N. JAF0037367
HOLDDOWN AND GUARD ASSEMBLY, RANGE GUARD, 18 FOOT
HOLDDOWN & GUARD ASSEMBLY, RANGE GUARD
GASOLINE ENGINE CONTROLS, P.I.N. JAF0037367 AND AFTER
FUEL LINES AND FUEL FILTER, DTI-466C DIESEL ENGINE, P.I.N. JJC0044001 AND AFTER
ENGINE CONTROLS, THROTTLE BALL JOINT TO INSIDE OF LEVER
ENGINE CONTROLS, THROTTLE BALL JOINT TO OUTSIDE OF LEVER
FOOT ACCELERATOR, VERSION WITH CAB
FUEL TANK AND FUEL LINES, TRACTOR WITHOUT CAB
FUEL INJECTION SYSTEM, D-239 DIESEL ENGINE
ADJUSTABLE HOLDDOWN, MODEL 8320 ONLY
FUEL TANK AND PIPING
ADJUSTABLE HOLDDOWN, MODEL 8330 ONLY
ADJUSTABLE HOLDDOWN (700117849 ADJUSTABLE HOLDDOWN COMPLETE)
THROTTLE CONTROLS
FOOT ACCELERATOR VERSION WITH CAB
THROTTLE CONTROLS, 1844 COTTON PICKER
FUEL TANK AND LINES
ELECTRICAL ADAPTION, WINDROW, WDX901, 1101 & 1701
MOWER DECK
OIL COOLER SYSTEM AND FAN SHROUD
HYDRAULIC HOLDDOWN, RAKE-UP
COMPACTOR AUGER DRIVE MOTOR SUPPLY AND RETURN LINES
MOWER DECK, 245 AND 255 TRACTORS
ENGINE HOOD, RADIATOR GRILLE
SEAT "BOSTROM"
LIGHTS AND HARNESS, CROWN TOP FENDERS
LIGHTS AND HARNESS, FLAT TOP FENDERS
TRANSMISSION HARNESS
TRANSMISSION HARNESS, TRANSMISSION S/N AJB0001514 THROUGH AJB0041224
TRANSMISSION HARNESS, TRANSMISSION S/N AJB0041225 THROUGH AJB0044914
ENGINE HARNESS, 9250 AND 9260 TRACTOR
TRANSMISSION HARNESS, TRANSMISSION S/N AJB0044915 AND AFTER
ENGINE HARNESS
ENGINE HARNESS, PRIOR TO P.I.N. JJC0103800
CHASSIS WIRING, 4000 WINDROWER
LIGHTING SYSTEM, 6 ROW WIDE, ENDWISE TRANSPORT
TRANSMISSION HARNESS POWER SHIFT TRANSMISSION P.I.N. JCB0028400 & AFTER
CENTER HARNESS, JJC0100280 -
CENTER HARNESS, P.I.N. JJC0117060 AND AFTER
CENTER HARNESS, SERIAL NUMBER JJC0114165 -
CHASSIS WIRING, 5000 WINDROWER
LIGHTING SYSTEM, ALL CYCLO AIR SEMI-MOUNTED EXCEPT 6 ROW NARROW, ALL CYCLO AIR VERTICAL FOLDING
LIGHTING SYSTEM, 8 ROW NARROW, ENDWISE TRANSPORT
SHAFT SPEED MONITOR CONTROL HARNESS, COMBINES WITH STRAW CHOPPER PRIOR TO P.I.N. JJC0117060
SHAFT SPEED MONITOR CONTROL HARNESS, COMBINES WITHOUT STRAW CHOPPER PRIOR TO P.I.N. JJC0117060
RIGHT HAND CONSOLE HARNESS
CHASSIS HARNESS
CONSOLE HARNESS, RIGHT-HAND CONSOLE
SHAFT SPEED MONITOR CONTROL, WITH STRAW CHOPPER, - JJC0100279
HORN AND MOUNTING
HARNESS, FRONT
CONSOLE HARNESS, RIGHT HAND SIDE, (CONT)
INSTRUMENT HARNESS AND CLUSTER
SHAFT SPEED MONITOR CONTROL, WITHOUT STRAW CHOPPER, - JJC0100279
SHAFT SPEED MONITOR CONTROL,WITH STRAW CHOPPER, SERIAL NUMBER - JJC0114164
SHAFT SPEED MONITOR CONTROL, WITHOUT STRAW CHOPPER, SERIAL NUMBER - JJC0114165
CONTROLLER HARNESS
HARNESS, REAR
CONSOLE HARNESS, RIGHT-HAND SIDE, PRIOR TO P.I.N. JJC0103800 (CONT'D)
CLAMPS
FIELD TRACKER, COMBINE HARNESS
FIELD TRACKER, HARNESS AND SENSORS
FIELD TRACKER, 1020 HEADER HARNESS
TRANSMISSION HARNESS, TRANSMISSION SERIAL NUMBER AJB0001514 THROUGH AJB0041224
CONSOLE HARNESS, LEFT-HAND
BATTERY AND BATTERY CABLES
CENTER HARNESS
FRONT HARNESS AND GAUGES, DIESEL MODELS ONLY
SEED FLOW II MONITOR SYSTEM, PRIOR TO MONITOR SERIAL NUMBER 0303-30376, CYCLO AIR & PLATE PLANTERS
SEED FLOW II MONITOR SYSTEM
FRONT HARNESS AND INSTRUMENT CLUSTER P.I.N. JAF0037367 AND AFTER
TRANSMISSION HARNESS, TRANSMISSION SERIAL NUMBER AJB0041225 THROUGH AJB0044914
CONSOLE HARNESS, RIGHT-HAND SIDE, P.I.N. JJC0103800 AND AFTER (CONT'D)
FRONT HARNESS AND GAUGES, GASOLINE MODELS ONLY
TRANSMISSION HARNESS, TRANSMISSION SERIAL NUMBER AJB0044915 AND AFTER
FRONT HARNESS AND INSTRUMENT CLUSTER, PRIOR TO P.I.N. JAF0096778
SEED FLOW II MONITOR SYSTEM, MONITOR SERIAL NUMBER 0303-30376 & AFTER CYCLO AIR & PLATE PLANTERS
FRONT HARNESS AND INSTRUMENT CLUSTER, P.I.N. JAF0096778 AND AFTER
SHAFT SPEED MONITOR CONTROL HARNESS, COMBINES WITH STRAW CHOPPER
GRAIN TANK HARNESS, UNLOADER LAMP HARNESS
REAR HARNESS AND BATTERY, PRIOR TO P.I.N. JAF0037682
REAR HARNESS, DIESEL MODELS
REAR HARNESS, GASOLINE MODELS
REAR HARNESS
CENTER TO REAR HARNESS
BATTERY AND CABLES, DIESEL MODELS
GRAIN TANK HARNESS
REAR HARNESS AND BATTERY, GASOLINE MODELS, PRIOR TO P.I.N. JAF0096778
REAR HARNESS AND BATTERY, GASOLINE MODELS, P.I.N. JAF0096778 AND AFTER
SEED FLOW II MONITOR SYSTEM, ALL RIGID, VERTICAL FOLD, FRONT FOLD AND PARALLEL FRONT FOLD PLANTERS
SHAFT SPEED MONITOR CONTROL HARNESS, COMBINES WITHOUT STRAW CHOPPER
CONSOLE HARNESS, LEFT-HAND SIDE
UNLOADER LAMP HARNESS
ENGINE HEATING COMPONENTS, DIESEL MODELS ONLY, DIESEL OR GASOLINE MODELS
LEFT-HAND SIDE HARNESS
WORK LAMPS AND WIRING
LEFTHAND, SIDE HARNESS
LEFT HAND, SIDE HARNESS
HARNESS, LEFT
BATTERY COVER, BATTERY AND CABLES
SYSTEM MONITOR, 1822 COTTON PICKER
SYSTEM MONITOR
FIELD TRACKER, SENSOR POTENTIOMETER MOUNTING
FIELD TRACKER SENSOR POTENTIOMETER MOUNTING
SHAFT SPEED MONITOR CONTROL, COMBINE WITH STRAW CHOPPER
SHAFT SPEED MONITOR CONTROL, COMBINE WITHOUT STRAW CHOPPER
OIL PAN AND GASKET
SHAFT SPEED MONITOR CONTROL, COMBINE WITH STRAW CHOPPER, PRIOR TO P.I.N. JJC0103800
SHAFT SPEED MONITOR CONTROL, COMBINE WITHOUT STRAW CHOPPER, PRIOR TO P.I.N. JJC0103800
SHAFT SPEED MONITOR CONTROL, COMBINE WITH STRAW CHOPPER, PRIOR TO P.I.N. JJC0096095
SHAFT SPEED MONITOR CONTROL, COMBINE WITHOUT STRAW CHOPPER, PRIOR TO P.I.N. JJC0096095
FIELD TRACKER, PONTENTIMETER MOUNTING
FIELD TRACKER, POTENTIOMETER MOUNTING
MOWER DECK, 275 TRACTOR
CRANKCASE & RELATED PARTS/706 & 756 TRACTORS/95 COTTON HARVESTERS/715 COMBINES/782 COTTON PICKERS
CRANKCASE AND RELATED PARTS, 616 AND 622 COTTON PICKERS
CRANKCASE AND RELATED PARTS, 686 AND HYDRO 86 TRACTORS
HYDRAULIC OIL COOLER, PRIOR TO TRACTOR PIN JJA0064978
HYDRAULIC OIL COOLER
HYDRAULIC OIL COOLER, TRACTOR PIN JJA0064978 AND AFTER
HYDRAULIC OIL COOLER, TRACTOR P.I.N. JJA0064978 AND AFTER
STEERING SUPPORT AND WHEEL
HYDRAULIC OIL COOLER, P.I.N. JJA0027701 AND AFTER
STEERABLE AXLE CONTROLS, POTENTIOMETER MOUNTING AND LINKAGE
SHORT BLOCK ENGINE, CLIPS, SERVICE KITS
HYDROSTATIC STEERING PUMP AND RESERVOIR
FUEL FEED PUMP AND CONNECTIONS, 616 AND 622 COTTON PICKERS
OIL PUMP AND FILTER, 706, 756, 686 & HYDRO 86 TRACTORS, 95 COTTON HARVESTERS & 782 COTTON PICKERS
OIL COOLER, FILTER AND PUMP, 616 AND 622 COTTON PICKERS
LUBRICATING OIL PUMP AND FILTER, 715 COMBINES
THERMOSTAT & WATER PUMP, 706 & 756 TRACTORS S/N 52-P-728 & AFTER, 95/715/782/686 & HYDRO 86
FLYWHEEL HOUSING, 95 COTTON HARVESTERS, 686 & HYDRO 86 TRACTORS, 782 COTTON PICKERS
FINGER MOUNTING ASSEMBLY
HYDROSTATIC POWER STEERING SYSTEM, 1210Q, 1210Q 4WD, 1210SK, 1212Q & 1212SK TRACTORS FOR EUROPE ONLY
HAY CONDITIONER SHIELD ASSEMBLIES, (S.N. CFH0032001 THRU CFH0032226)
EJECTOR AND MOUNTING ASSEMBLY
STEERING AXLE SHIELD, STATIONARY
GEARBOX, STEP-UP
CLUTCH HOUSING TOP COVER
CLUTCH HOUSING TOP COVER, WITHOUT CAB
CLUTCH HOUSING, TOP COVER
CLUTCH HOUSING TOP COVER VERSION WITH CAB, 2 POWER SHIFT SPEED, CREEP SPEED, FORWARD/REVERSE CONTROL
CLUTCH HOUSING TOP COVER, WITH CAB
TRANSMISSION HOUSING
CYLINDER HEAD AND RELATED PARTS / ENGINE BLOCK HEATER
CLUTCH
CONTROLS, FORWARD AND REVERSE
OIL COOLER HYDRAULIC SYSTEM
PROPULSION SPEED CONTROL
TRANSMISSION ASSEMBLY, RANGE SELECTOR VALVE, WITH STEEL ENCASED SOLENOID COILS (CONT'D)
TRANSMISSION, RANGE SELECTOR VALVE, WITH STEEL ENCASED SOLENOID COILS
OIL COOLER AND SUPPORTS
LOADER CONTROLS, USED ON MODELS WITH HAND CONTROLS
TWO SPEED VARIABLE DRIVE
INCHING PEDAL
CREEPER SHIFT CONTROL, INTERNAL
SPACER CAM ASSEMBLY
LOADER CONTROLS, USED ON MODELS WITH FOOT CONTROLS
FUEL INJECTION PUMP AND CONNECTIONS, 786, 886, 3088 AND 3288 TRACTORS
LOADER CONTROLS, PRIOR TO P.I.N. JAF0037367
OIL PUMP PIPING AND FILTER, 826, 2826, 786 AND 886 TRACTORS, 1400 COTTON HARVESTERS
CREEPER SHIFT CONTROL - INTERNAL
OIL PUMP AND FILTER, 1420 COMBINES, 3088 AND 3288 TRACTORS
FINGER GUIDE ASSEMBLY (TWINE)
LOADER CONTROLS USED ON MODELS WITH HAND CONTROLS, P.I.N. JAF0037367 AND AFTER
PROPULSION CONTROL
BEVEL GEAR CASE AND PROPELLER SHAFT
TANDEM PUMP LINKAGE, PRIOR TO P.I.N. JAF0037367
TRANSMISSION SHIFT CONTROLS
TANDEM PUMP LINKAGE, P.I.N. JAF0037367 THROUGH JAF0037681
TANDEM PUMP LINKAGE, P.I.N. JAF0037682 AND AFTER
FORWARD AND REVERSE PUMP CONTROL LEVERS AND LINKAGE
GEAR CASE ASSEMBLY, CHOPPER DRIVE
HOLDDOWN ASSY, SWATHMASTER
HOLDDOWN ASSY, RAKE-UP
BRAKE PEDAL SYSTEM
BRAKE PEDAL SYSTEM, P.I.N. JJA0028200 AND AFTER
PARKING BRAKE, FOR GREAT BRITAIN
PARKING BRAKE
MASTER BRAKE CONTROLS
PARKING LATCH AND SEAT BARS - USED ON MODELS WITH DUAL SEAT BARS AND TWO PULLEYS PER SIDE
PARKING LATCH AND SEAT BARS
BRAKE PEDAL
BRAKE PEDAL SYSTEM, PRIOR TO P.I.N. JJA0027701
PARKING LATCH AND SEAT BARS (CONT'D)
BRAKE PEDAL SYSTEM, P.I.N. JJA0027701 AND AFTER
BRAKE SYSTEM
SEAT BARS AND PARKING BRAKE CONTROL, EUROPEAN MODELS, P.I.N. JAF0140357 AND AFTER
MASTER BRAKES
MAIN SHIELDS ASSEMBLY, LEFT
PARKING LATCH AND SEAT BARS USED ON MODELS WITH DUAL SEAT BARS AND ONE PULLEY PER SIDE
SHIELDS ASSEMBLY, TOP AND FRONT
SHIELDS AND TWINE BOX ASSEMBLY - LEFT
MAIN SHIELDS ASSEMBLY, RIGHT
DIVIDER AND DEFLECTOR ASSEMBLIES, 21 FOOT
DIVIDER AND DEFLECTOR ASSEMBLIES, 25 AND 30 FOOT
SHIELDS AND WIRE BOX ASSEMBLY - LEFT
BRAKE MECHANISM, 885 HIGHWAY TRACTORS
HAND BRAKE
TONGUE SHIELDS AND LATCH SUPPORT ASSEMBLIES, LEFT, SERIAL NUMBER CFH0124001 THROUGH CFH0124137
PARKING LATCH AND SEAT BARS, NORTH AMERICA
TONGUE SHIELDS AND LATCH SUPPORT ASSEMBLIES, LEFT, SERIAL NUMBER CFH0124401 AND LATER
MESH WRAP, BOX ASSEMBLY, SERIAL NUMBER CFH0073272 AND LATER
MESH WRAP, ROLLER ASSEMBLY, SERIAL NUMBER CFH0073272 AND LATER
WINDROW FORMING SHIELDS
WHEEL ASSEMBLY
PARKING LATCH AND SEAT BARS, EUROPE
PULLEY DRIVE, SHAKER
BELT DRIVE - JACKSHAFT, FAN
SHAKER SHAFT DRIVE
DRIVE ASSEMBLY, CLEANING FAN JACKSHAFT
JACKSHAFT, FAN, DRIVE
CONVEYOR CHUTES, TRIPLE CENTER TELESCOPING, 6 ROW NARROW NO. 3F, 4R, 4F, 5R
CONVEYOR CHUTES - TRIPLE CENTER TELESCOPING, 6 ROW NARROW NO. 3F, 4R, 4F, 5R
BLOWER DIRECT DRIVE HYDRAULIC SYSTEM, ALL RIGID PLANTERS, 8 ROW WIDE, VERTICAL FOLD
PTO HYDRAULICS
HYDRAULICS, GEAR, PISTON PUMP AND HYDRAULIC LINES, WITH HITCH
HYDRAULIC PUMP AND LINES, WITH HITCH, PRIOR TO TRANSMISSION SERIAL NO. 16283224
HYDRAULIC PUMP AND LINES, WITH HITCH, TRANSMISSION SERIAL NO. 16283224 AND AFTER
HYDRAULICS, GEAR, PISTON PUMP AND HYDRAULIC LINES, WITHOUT HITCH
HYDRAULIC SYSTEM, OIL COOLER AND MOUNTING
HYDRAULIC PUMP AND LINES, WITHOUT HITCH, PRIOR TO TRANSMISSION SERIAL NO. 16283224
HYDRAULIC PUMP AND LINES, WITHOUT HITCH, TRANSMISSION SERIAL NO. 16283224 AND AFTER
HYDRAULIC PUMP AND LINES, WITHOUT HITCH, TRANSMISSION SERIAL NO.16283224 AND AFTER
BLOWER DIRECT DRIVE HYDRAULIC SYSTEM, 6 AND 8 ROW
CRANKCASE AND RELATED PARTS, 806 AND 2806 TRACTORS W/ENGINE S/N PIOR TO 22699
TONGUE AND HYDRAULIC DRIVE ASSEMBLY, OLD STYLE
HYDRAULIC COUPLERS AND LINES, 9250 TRACTOR
DRAFT CONTROL
CRANKCASE AND RELATED PARTS, 1206 & 21206 TRACTORS, 806 & 2806 TRACTORS W/ENGINE S/N 22699 & AFTER
HYDRAULIC OIL COOLER AND MOUNTING
BLOWER DIRECT DRIVE HYDRAULIC SYSTEM, CYCLO AIR PLANTERS , 4, 6 AND 8 ROW
THREE POINT HITCH HYDRAULICS, MANUAL CONTROLLED, 9250 TRACTOR
THREE POINT HITCH HYDRAULICS, LIFT CYLINDERS AND LINES, ELECTRONIC CONTROLLED, 9250 TRACTOR
DRIVE/GAUGE WHEEL LIFT HYDRAULIC SYSTEM, 12 ROW NARROW - PARALLEL FRONT FOLD
HYDROSTATIC DRIVE HYDRAULIC CIRCUIT SUPPLY & RETURN LINES, DIESEL MODELS
REMOTE HYDRAULIC CYLINDER ATTACHING PARTS
HYDROSTATIC DRIVE HYDRAULIC CIRCUIT SUPPLY & RETURN LINES GASOLINE MODELS PRIOR TO P.I.N. JAF0095713
REEL PUMP DRIVE, P.I.N. JJC0034860 THROUGH JJC0097170
REEL PUMP DRIVE, PRIOR TO SERIAL NO. JJC0034860 & SERIAL NO. JJC0097171 THROUGH JJC0097189
REEL PUMP DRIVE, P.I.N. JJC0035901 THROUGH JJC0096070
REEL PUMP DRIVE, P.I.N. JJC0039130 THROUGH JJC0103066
REEL PUMP DRIVE, PRIOR TO P.I.N. JJC0035901, AND, P.I.N. JJC0096071 THROUGH JJC0096094
REEL PUMP DRIVE, PRIOR TO P.I.N. JJC0039130, P.I.N. JJC010367 THROUGH JJC0103799
HYDROSTATIC DRIVE HYDRAULIC CIRCUIT SUPPLY & RETURN LINES GASOLINE MODELS W/P.I.N. JAF0095713 &AFTER
HYDRAULIC SYSTEM
OIL COOLER
REEL PUMP DRIVE, PRIOR TO S/N JJC0046598, AND, P.I.N. JJC0115001 THROUGH JJC0117059
REEL PUMP DRIVE, P.I.N. JJC0046598 THROUGH JJC0115000
REEL DRIVE PUMP, SERIAL NUMBER JJC0047701 - JJC0114000
REEL DRIVE PUMP, JJC0040501 - JJC0100150
REEL DRIVE PUMP, - JJC0040500, JJC0100151-JJC0100279
AUXILIARY CONTROLS AND VALVE MOUNTING
UNIT LIFT CONTROLS
LOADER LIFT HYDRAULIC CIRCUIT
LOADER BUCKET HYDRAULIC CIRCUIT
CONTROLS, LOADER
CONTROLS, AUXILIARY
DRUM BAR LUBRICATION RESERVOIR SYSTEM RESERVOIR WITH TWO LOWER PORTS
DRUM BAR LUBRICATION RESERVOIR SYSTEM RESERVOIR WITH ONE LOWER PORT
VALVE MOUNTING
LOADER CONTROLS
HEIGHT CONTROL VALVES AND BRUSH UNIT LIFT SYSTEM
THREE POINT HITCH HYDRAULICS, MANUAL CONTROLLED
THREE POINT HITCH HYDRAULICS, LIFT CYLINDERS AND LINES, ELECTRONIC CONTROLLED
HEADER DRIVE SYSTEM
HEADER AND REEL DRIVE, OIL COOLER TO PUMP SYSTEM
HEADER AND REEL DRIVE, SELECTOR VALVE SYSTEM
REEL PUMP DRIVE, DRIVE AND CONNECTIONS
REEL PUMP DRIVE
GRAIN TANK UPPER EXTENSIONS, LOW HP
STRAWCHOPPER - HOUSING, GEAR
6 BAT REEL, STEEL TINES, HART CARTER
END DELIVERY DEFLECTOR KIT, HK60566 END DELIVERY DEFLECTOR KIT COMPLETE, 21 FOOT ONLY
REEL OR PICKUP DRIVE
6 BAT REEL, 52 INCH REEL WITH STEEL TINES, HART CARTER
MAIN DRIVE GEAR BOX ASSEMBLY
CHASSIS AND COVERS
REAR AXLE HOUSING AND COVERS
6 BAT REEL, SINGLE ECCENTRIC, PLASTIC TINES, 15.0, 17.5 AND 20.0 HEADER, HART CARTER
6 BAT REEL, DOUBLE ECCENTRIC, PLASTIC TINES, 20.0, 22.5, 25.0 AND 30.0 FOOT HEADER, HART CARTER
HYDRAULIC OIL TANK COVER WITH TOP HINGED ACCESS DOOR
HYDRAULIC OIL TANK COVER
FOOTBOARD
FENDERS, FRAME PLATFORMS AND ROPS ATTACHMENT, 1210, 1210 FOUR-WHEEL DRIVE AND 1212 TRACTORS
STANDARD AIR SUSPENSION SEAT, MOUNTING PLATE AND SLIDES
ROW MARKER, CYCLO AIR AND PLATE PLANTERS, 6 ROW NARROW AND 4 ROW
WINDSCREEN
ROW MARKER, CYCLO AIR HORIZONTAL FOLDING, 12 ROW NARROW
CAB DOOR AND LATCH, WITH RETURN SPRING AT LATCH LEVER, REF. 44
WINDSCREEN REAR
CAB DOOR AND LATCH WITH RETURN SPRING AT LATCH LEVER, REF. 44, PRIOR TO P.I.N. JEE0033501
CAB DOOR AND LATCH WITH STOP BOLT AT LATCH LEVER, REF. 44, PRIOR TO P.I.N. JEE0033501
ROW MARKER, CYCLO AIR HORIZONTAL FOLDING, 12 ROW WIDE & 16 ROW NARROW
STANDARD AIR SUSPENSION SEAT, MOUNTING PLATE AND SLIDES, PRIOR TO TRACTOR PIN JJA0061559
DELUXE AIR SUSPENSION SEAT, SWIVEL PLATE AND SLIDES
CAB DOOR AND LATCH, WITH STOP BOLT AT LATCH LEVER, REF. 44
STANDARD AIR SUSPENSION SEAT - MOUNT PLATE & SLIDES, PRIOR TO TRACTOR S/N JJA0061559
CLOTH SEAT, AIR SUSPENSION, SWIVEL AND SLIDES
STANDARD AIR SUSPENSION SEAT, MOUNTING PLATE AND SLIDES, TRACTOR PIN JJA0061559 AND AFTER
STANDARD AIR SUSPENSION SEAT - MOUNT PLATE & SLIDES, TRACTOR S/N JJA0061559 & AFTER
VINYL SEAT, MECHANICAL SUSPENSION, ROPS UNITS (CONT'D)
HEATER FEED AND RETURN PIPES
AIR SUSPENSION SEAT, SWIVEL AND SLIDES, PRIOR TO SERIAL NUMBER JJA0028200
AIR SUSPENSION SEAT, SWIVEL AND SLIDES, PRIOR TO P.I.N. JJA0028200
AIR SUSPENSION SEAT, SWIVEL AND SLIDES, P.I.N. JJA00228200 AND AFTER
GRAIN FEED INDICATOR AND SHIFTER
MAIN FRAME AND COVERS
DISK HILLER, 13 INCH
FAN SHROUD, CYCLO AIR PLANTERS
AVADEX HOPPER
AVADEX DRIVE, PRIOR TO 1981 SEASON
AIR CONDITIONER PLUMBING, CONDENSER, RECEIVER-DRIER, PRIOR TO P.I.N. JEE0031850
HEATER PLUMBING
AVADEX DRIVE, 1981 SEASON AND AFTER
SEED MODULE CUTOFF WHEEL, CYCLO AIR PLANTERS
HEATER LINES, 9240 TRACTOR, PRIOR TO P.I.N. JCB0028400
HEATER LINES, 9250 AND 9260 TRACTORS, PRIOR P.I.N. JCB0028400
STABILIZER, THREE POINT HITCH, NOT FOR UK
AIR CONDITIONING, CONDENSER AND RECEIVER DRIER
OPERATOR SEAT, MOUNTING, TOOLBOX
STABILIZER, THREE POINT HITCH
SEED HOPPER, CYCLO AIR PLANTERS, SEED GROWERS SPECIAL, PLATE PLANTERS
AIR CONDITIONING, CONDENSER AND RECIEVER-DRIER, PRIOR TO TRACTOR PIN JJA0064978
AIR CONDITIONING, CONDENSER AND RECEIVER-DRIER, PRIOR TO TRACTOR P.I.N. JJA0064978
BALE ROLLER CHUTE KIT, (CON'T)
SEAT MOUNTING AND SEAT BELT
STRAW SPREADER
AIR CONDITIONING, CONDENSER AND RECEIVER-DRIER
CLEANING FAN SHIELDS
STANDARD SEAT MOUNTING & SEAT BELTS PRIOR TO P.I.N. JAF0222205
FRONT WHEELS, BALLAST WEIGHTS AND FRONT FENDERS
LIGHT KIT (WARNING), (HK50456 WARNING LIGHT KIT COMPLETE-TO
PLATE PLANTING UNIT, CYCLO AIR PLANTERS, SEED GROWERS SPECIAL PLATE PLANTERS
FOLDING GRAIN TANK EXTENSIONS
DISC OPENER AND GAUGE WHEEL, STEEL, CYCLO AIR AND PLATE PLANTERS
DISC OPENER AND GAUGE WHEEL, NYLON, WITH LEFT HAND LEADING DISC OPENER, ON R.H. SIDE OF PLANTER
DISC OPENER AND GAUGE WHEEL, NYLON, WITH RIGHT HAND LEADING DISC OPENER, ON L.H. SIDE OF PLANTER
STANDARD SEAT MOUNTING AND SEAT BELTS, P.I.N. JAF0222205 AND AFTER
DELUXE SEAT MOUNTING AND SEAT BELTS, PRIOR TO P.I.N. JAF0222205
PRESS WHEEL AND COVERING DISC
PRESS WHEEL AND COVERING DISC, PLATE TYPE UNIT PLANTER WITH PRESS WHEEL DRIVE ROW UNITS
DELUXE SEAT MOUNTING AND SEAT BELTS, P.I.N. JAF0222205 AND AFTER
FOPS/ROPS AND ROPS - GLAZED, EUROPEAN MODELS
SEAT
ADJUSTABLE HOLDDOWN
FOPS/ROPS AND ROPS, GLAZED, EUROPE
LIQUID FERTILIZER SQUEEZE PUMP ASSEMBLY, CYCLO AIR & PLATE TRAILING ALL ROW SIZES
FENDERS AND FRAME PLATFORMS, 885, 885G AND 885H TRACTORS WITH REINFORCED FULL FENDERS
FERTILIZER DISC OPENERS, CYCLO AIR AND PLATE TRAILING, ALL ROW SIZES
GRANULAR CHEMICAL HOPPER AND SUPPORT, CYCLO AIR & PLATE PLANTERS
LIGHT KIT, WARNING, HK50456 LIGHT KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY
LIGHT KIT, WARNING, HK50456 WARNING LIGHT KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY
STANDARD SEAT MOUNTING AND SEAT BELTS PRIOR TO P.I.N. JAF0037367
STANDARD SEAT MOUNTING AND SEAT BELTS P.I.N. JAF0037367 AND AFTER
CAB DOOR AND LATCH
BACKHOE SEAT AND MOUNTING PARTS, USED ON D100 OR D100XR BACKHOE ONLY
OPERATORS CAB MOUNTING AND RAILS
BACKHOE SWING TOWER AND BOOM, D100 OR D100XR BACKHOE
VINYL SEAT, MECHANICAL SUSPENSION (CONT'D)
VINYL SEAT, MECHANICAL SUSPENSION
MESH WRAP BOX ASSEMBLY, SERIAL NUMBER CFH0084501 THROUGH CFH0084545
MESH WRAP KIT, BOX ASSEMBLY, SERIAL NUMBER CFH0073001 THROUGH CFH0073137
MESH WRAP KIT, BOX ASSEMBLY, SERIAL NUMBER CFH0073138 THROUGH CFH0073271
MESH WRAP KIT, BOX ASSEMBLY, SERIAL NUMBER CFH0073272 AND LATER
HYDRAULIC DRIVE AND CONTROL ASSEMBLY - FRONT, (RADIAL PISTON PUMP)
MESH WRAP KIT, ROLLER ASSEMBLY, SERIAL NUMBER CFH0073011 THROUGH CFH0073271
MESH WRAP KIT, ROLLER ASSEMBLY, SERIAL NUMBER CFH0073272 AND LATER
MESH WRAP ROLLER ASSEMBLY, SERIAL NUMBER CFH0073011 THROUGH CFH0073271
OPERATORS SEAT
HEATER PLUMBING, CAB
AIR CONDITIONING, CONDENSER, RECEIVER-DRIER AND PLUMBING
AIR CONDITIONING, COMPRESSOR MOUNTING AND DRIVE
REEL DRIVE
6 BAT REEL, STEEL TINES OR REAR MOUNTED PLASTIC TINES
DRUM DRIVE
FIELD TRACKER, HEADER DRIVE SHAFTS
PLANT LIFTER
ELECTRIC CLUTCH, 12 ROW NARROW - PARALLEL FRONT FOLD
6 BAT REEL, 52 INCH REEL WITH STEEL TINES
HEIGHT CONTROL, BRUSH ROLL UNIT
HEADER MOUNTING
BOLL AUGER AND TROUGH
CROSS AUGER AND KICKER, AUGER HOUSING
BOLL BOX AND CYLINDER
FEEDER, FEEDER DRIVE AND FAN GEAR HOUSING
CROSS AUGER AND KICKER, SHIELDS AND SUPPORTS
FEEDER AND CLEANING FAN GEAR CASE
6 BAT REEL, SINGLE ECCENTRIC, PLASTIC TINES, 15, 16-1/2, 17-1/2 AND 20 FOOT HEADER (HART-CARTER)
CROSS AUGER AND KICKER, TWO ROW
CROSS AUGER AND KICKER, FOUR ROW
CROSS AUGER EXTENSION
HEIGHT CONTROL
6 BAT REEL, DOUBLE ECCENTRIC, PLASTIC TINES, 20, 22-1/2, 25 AND 30 FOOT HEADER (HART-CARTER)
DRUM ROTOR AND DRIVE CAMS
MOISTENER STAND ASSEMBLY AND SUPPORT
PLANT COMPRESSOR, WITHOUT DEEP CONTOUR POCKETS
PLANT COMPRESSOR, WITH DEEP CONTOUR POCKETS
HEIGHT CONTROL LINKAGE, 2022 COTTON PICKER
HEIGHT CONTROL LINKAGE, 2044 COTTON PICKER
DRUM HOUSING, 2022 COTTON PICKER
ROTOR DRIVE MOUNTING
ROTOR DRIVE
ROTOR DRIVE, MOUNTING
ROTOR DRIVE (CONT'D)
ROTOR DRIVE, MOUNTING (CONT'D)
ROTOR DRIVE, (CONT)
CONVEYOR
ROTOR DRIVE, P.I.N. JJC0026711 & AFTER, (CONT'D)
ROTOR DRIVE, P.I.N. JJC0024223 AND AFTER, (CONT)
FAN PULLEY LINKAGE, USED WITH 8 INCH DIAMETER IDLER PULLEY
ROTOR DRIVE GEAR HOUSING, 1315328C4
AIR SYSTEM
REAR FAN PULLEY LINKAGE
SEED DRUM DRIVE, AFS PLANTER, 12 ROW AND 16 ROW NARROW AND 12/23 SRC
CLEANING FAN, SHORT LENGTH CLEANING SYSTEM
CLEANING FAN, HOUSING, - JJC0100460
FAN SHIELDS, SERIAL NUMBER - JJC0114634
FAN SHIELDS
CLEANING FAN AND SHIELDS
CLEANING FAN HOUSING
BASKET PIVOT SUPPORT
SEED HOPPER
CLEANING FAN AND SUPPORTS
CLEANING FAN, HOUSING, MODELS WITHOUT EXTENDED LENGTH CLEANING SYSTEM
HOODSHEETS AND SUPPORTS, P.I.N. : 885001-
SIDE SHEETS, P.I.N. : -885000
SEED HOPPER, ALL RIGID AND VERTICAL FOLD, 12 AND 16 ROW NARROW, FRONT FOLD
CLEANING FAN DRIVE SPEED CONTROL
HOODSHEETS & SUPPORTS
FAN SHROUD
SIDE SHEETS, P.I.N. : 885001-
CLEANING FAN, DRIVE SPEED CONTROL
SEED HOPPER, 24 ROW NARROW, FRONT FOLD
REAR FAN PULLEY LINKAGE, USED WITH 8 INCH DIAMETER IDLER PULLEY
FAN SHROUD, ALL RIGID, VERTICAL FOLD, AND FRONT FOLD PLANTERS
FAN SHIELDS, MODELS WITHOUT EXTENDED LENGTH CLEANING SYSTEM
SEED HOPPER, ALL RIGID AND VERTICAL FOLD
SEED HOPPER, 24 ROW NARROW - FRONT FOLD, 12/23 SOLID ROW CROP - FRONT FOLD
SEED HOPPER, SEED GROWERS SPECIAL, PLATE PLANTERS
FAN SHROUD, ALL RIGID, VERTICAL FOLD, FRONT FOLD & PARALLEL FRONT FOLD PLANTERS
PLATE PLANTING UNIT, SEED GROWERS SPECIAL
SEED HOPPER, SEED GROWERS SPECIAL, ALL RIGID, VERTICAL FOLD, AND FRONT FOLD PLANTERS
SEED HOPPER, SEED GROWERS SPECIAL, ALL RIGID, VERTICAL FOLD & FRONT FOLD PLANTERS
COOLER SHROUD FOR SEED MODULE HOUSING, AFS PLANTER, 12 ROW NARROW & 16 ROW NARROW & 12/23 SRC
GRAIN AUGER TROUGH, SHORT LENGTH CLEANING SYSTEM / GRAIN AUGER AND BEARINGS
GRAIN AUGER TROUGH, - JJC0100459
GRAIN AUGER TROUGH, JJC0100460 -
GRAIN AUGER TROUGH, GRAIN AUGER AND BEARINGS
CONSOLE AND CAB SUPPORTS
TAILINGS AUGER TROUGH, SHORT SIEVE
TAILINGS AUGER TROUGH, LONG SIEVE, - JJC0100000
OPERATOR SEAT AND SUPPORTS
TAILINGS AUGER TROUGH PANEL, JJC0100460 -
TAILINGS AUGER TROUGH, JJC0100460 -
GRAIN AUGER TROUGH, MODELS WITH EXTENDED LENGTH CLEANING SYSTEM
DISK OPENER AND GAUGE WHEEL, ALL RIGID, VERTICAL FOLD, AND FRONT FOLD PLANTERS
DISC OPENER & GAUGE WHEEL, W/LEFT-HAND LEADING DISC (ON RIGHT HAND SIDE OF PLANTER)
GRAIN AUGER TROUGH, PERFORATED
DISC OPENER & GAUGE WHEEL, W/RIGHT-HAND LEADING DISC (ON LEFT HAND SIDE OF PLANTER)
PRESS WHEEL AND COVERING DISK, ALL RIGID, VERTICAL FOLD, AND FRONT FOLD PLANTERS
DISC OPENER AND GAUGE WHEEL, WITH LEFT-HAND LEADING DISC OPENER, ON R.H. SIDE OF PLANTER
PRESS WHEEL & COVERING DISC, USED W/LEFT-HAND LEADING DISC OPENER (ON RIGHT HAND SIDE OF PLANTER)
DISC OPENER AND GAUGE WHEEL, WITH RIGHT-HAND LEADING DISC OPENER, ON L.H. SIDE OF PLANTER
PRESS WHEEL & COVERING DISC, USED W/RIGHT-HAND LEADING DISC OPENER (ON LEFT HAND SIDE OF PLANTER)
PRESS WHEEL AND COVERING DISC, USED WITH LEFT-HAND LEADING DISC OPENER, ON R.H. SIDE OF PLANTER
TAILINGS AUGER TROUGH, LONG SIEVE
PRESS WHEEL AND COVERING DISC, USED WITH RIGHT-HAND LEADING DISC OPENER, ON L.H. SIDE OF PLANTER
TAILINGS AUGER TROUGH PANEL
TAILINGS AUGER TROUGH PANEL, LONG SIEVE, P.I.N. JJC0035901 AND AFTER
TAILINGS AUGER TROUGH PANEL AND GATE, MODELS WITH STRAW SPREADER
TAILINGS AUGER TROUGH, MODELS WITHOUT EXTENDED LENGTH CLEANING SYSTEM
BASKET DOOR, COVERS AND SHIELDS, 4 ROW WIDE AND 5 ROW NARROW
TAILINGS AUGER TROUGH, MODELS WITH EXTENDED LENGTH CLEANING SYSTEM
TAILINGS AUGER TROUGH PANEL, MODELS WITH EXTENDED LENGTH CLEANING SYSTEM
BASKET DOOR, COVERS AND SHIELDS, 4 ROW WIDE AND 5 ROW NARROW, PRIOR TO P.I.N. JJC0156230
BASKET DOOR, COVERS AND SHIELDS, 4 ROW WIDE AND 5 ROW NARROW, P.I.N. JJC0156230 AND AFTER
TAILINGS AUGER TROUGH, PANEL
BASKET DOOR, COVERS AND SHIELDS, 5 ROW WIDE, PRIOR TO P.I.N. JJC0156230
BASKET DOOR, COVERS AND SHIELDS, 5 ROW WIDE, P.I.N. JJC0156230 AND AFTER
BASKET HAND RAIL, 2022 COTTON PICKER
ROW MARKER, 6 ROW NARROW, 6/11 ROW SOLID ROW CROP
ROW MARKER, 4 ROW WIDE AND 4 ROW NARROW - RIGID, 6 ROW
ROW MARKER, RIGID FRAME PLANTER, 6 ROW NARROW & 11 ROW SOLID ROW CROP
ROW MARKER, 4 ROW WIDE AND 4 ROW NARROW, RIGID, 6 ROW NARROW, RIGID
OPERATORS PLATFORM
GRAIN TANK, EXTENSIONS
HANDRAILS
ENGINE AND RADIATOR SHIELDS, FRONT ACCESS DOOR AND SUPPORTS
ENGINE AND RADIATOR SHIELDS, REAR ACCESS DOOR AND SUPPORTS
LIQUID FERTILIZER SQUEEZE PUMP ASSEMBLY, ALL RIGID, VERTICAL
LIQUID FERTILIZER PISTON PUMP SYSTEM, PUMP MOUNTING AND
STRAW CHOPPER GEAR HOUSING (CONT'D)
SEAT, GRAMMER
GRANULAR CHEMICAL HOPPER AND SUPPORT
DOUBLE DISC OPENERS, SUPPORTS AND TUBES, LIQUID AND DRY FERTILIZER
DOUBLE DISC OPENERS, SCRAPERS AND DISCS, LIQUID AND DRY FERTILIZER
STRAW CHOPPER, GEAR HOUSING
SEAT, SABLE, 2500/7
GRANULAR CHEMICAL HOPPER AND SUPPORT, ALL RIGID, VERTICAL
STRAW CHOPPER GEAR HOUSING, (CONT)
STRAW CHOPPER GEAR HOUSING, (CONT'D)
STRAW CHOPPER, GEAR HOUSING (CONT'D)
SEAT, KLEPP
GRANULAR CHEMICAL HOPPER AND SUPPORT, ALL RIGID, VERTICAL FOLD, AND FRONT FOLD PLANTERS
SMV EMBLEM, ALL RIGID, VERTICAL FOLD AND FRONT FOLD PLANTERS
MECHANICAL SUSPENSION SEAT, CUSHIONS AND SLIDES
AIR SUSPENSION SEAT, CUSHIONS AND SLIDES
OPERATORS CAB
0101908 GEARBOX PARTS
CHOPPING UNIT GEARBOX; (VAR) 722761116
CHOPPING UNIT GEARBOX; (VAR) 722761106
HIGH SPEED CHOPPING UNIT GEARBOX; (VAR) 425140046
HIGH SPEED CHOPPING UNIT GEARBOX; (VAR) 425140036
CHOPPING UNIT GEARBOX
HIGH SPEED CHOPPING UNIT GEARBOX
BRAKE PEDAL SYSTEM, PRIOR TO P.I.N. JJA0028200
CHOPPING UNIT, GEARBOX; (Prod Date) after 01-MAR-2015; (VAR) 425063047, 722761117, 722761267
PULLEY, DRIVE, SHAKER; (Prod Date) after 01-MAR-2015; (VAR) 425400107, 425400117, 425400127, 425400137, 425400147, 425400157, 425400167, 425400177, 425400187, 425400197, 425400207, 425400217, 425400287
JACKSHAFT, FAN, DRIVE; (Prod Date) after 01-MAR-2015; (VAR) 425400107, 425400117, 425400207, 425400217
JACKSHAFT, FAN, DRIVE; (Prod Date) after 01-MAR-2015; (VAR) 425400127, 425400137, 425400147, 425400157, 425400167, 425400177, 425400187, 425400197, 425400287
GEARBOX, STRAW CHOPPER / FLAIL
CLEANING FAN JACKSHAFT DRIVE ASSY
DIA KIT, CHOPPER BODY ASSY; (Prod Date) after 01-MAR-2015
PULLEY, DRIVE, SHAKER; (VAR) 425400607, 425400657, 425400687, 425400697, 425400777, 425400787, 425400797, 425400807, 425400817, 425400827, 425400837, 425400847, 425400857, 425400867, 425400877, 425400887, 425400897, 425400907, 425400987
PULLEY, JACKSHAFT, FAN; (VAR) 425400607, 425400657, 425400687, 425400697, 425400777, 425400787, 425400797, 425400807, 425400817, 425400827, 425400837, 425400847, 425400857, 425400867, 425400877, 425400887, 425400897, 425400907, 425400987

Заменён на

87872
72187196

Номера других производителей — совместимость не проверена

13-512

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.