Болт, Hex, 1/2" - 13 x 1-3/4", Gr 5 — фото недоступно

Болт, Hex, 1/2" - 13 x 1-3/4", Gr 5 McC413-828

Артикул: McC413-828
Наличие: Под заказ
Предложений: 1
Производитель: Case IH

Цена за штуку 308 ₽

Цена с НДС

актуально на момент последнего обновления каталога

Кол-во

Введите нужное количество и нажмите «Уточнить наличие» — цена и сроки поставки обновятся.

Итого за 1 шт. 308 ₽

Купить

Доступные предложения

Склад Уфа 308 ₽ Остаток по запросу: 0 шт.

Нет в наличии

По каталогу Case IH

Название: Болт, Hex, 1/2" - 13 x 1-3/4", Gr 5
Название (EN): BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5
Номер в каталоге: 413-828
Размеры и исполнение: Thru Spacer to Clutch Hsg| 11 GA| (12.7 x 44.45 mm)| SCREW, 1/2-13 x 1-3/4" cap| (Kopfschraube 1/2" x 45 mm) Hex, 1/2"-13 x 1 3/4", G5| SCREW, 1/2-13 x 1-3/4" hex-hd. cap| 1/2 x 1-3/4 pln type 5, Diesel engine tractors| 1/2 x 1-3/4 pln type 5| Thru spacer to clutch housing| SCREW, 1/2-13 x 1-3/4 hex-hd. cap, Diesel engine tractors| 1/2 x 1-3/4 pln type 5, thru spacer to clutch hsg| BOLT, 1/2 x 1-3/4 pln type 5, thru spacer to clutch housing| SCREW, 1/2-13 x 1-3/4 hex-hd cap, crankcase to housing| SCREW, 1/2-13 x 1-3/4 hex-hd cap| CAP SCREW, 1/2 x 1-3/4" N.C. hex head| SCREW, 1/2-13 x 1-3/4 hex-hd. cap| 2 used per guard Hex, 1/2"-13 x 1 3/4", G5| Used with Ref 16| Used with Ref 5| hex-hd., 1/2" x 1-3/8"| SCREW, 1/2 x 1-3/4" cap| (Vis à tête hexagonale 12.7 x 44.4 mm gros filet) Hex, 1/2"-13 x 1 3/4", G5| carriage, (12.7 x 44.45 mm)| SCREW, 1/2-13 x 1-3/4 C-Z hex-hd. cap| SCREW, 1/2-13 x 1-3/4 hex-hd cap, platform| Not Illustrated| FF| SCREW, cap, hex-hd., 1/2-13NC x 1-3/4"| CAP SCREW, 1/2-13 N.C. x 1-3/4" hex head| SCREW, cap, hex-hd., 1/2-13 NC x 1-3/4"| V.T.H. (12.7 x 44.45 mm)| For Models 533, 633| For models 533, 633| SCREW, cap, hex-hd., 1/2-13 NC x 1-3/4" (See note)| Model E423| Model E353| SCREW, 1/2-13 x 1-3/4 hex-hd cap, for tractors with draft control| Model 323| (Replaces screw 179887) Hex, 1/2"-13 x 1 3/4", G5| BOLT, , Engine S/N 5680 and after Hex, 1/2"-13 x 1 3/4", G5| Model 423| SCREW, cap, hex-hd., 1/2-13NC x 1-3/4" (A, B, C, D only)| SCREW, cap, hex-hd., 1/2-13NC x 1-3/4" (A, B, C, D, E, F only)| Model 353| BOLT, Hex, 1/2"-13 x 1 3/4", G5| If used Hex, 1/2"-13 x 1 3/4", G5| (Replaces bolt 179887) Hex, 1/2"-13 x 1 3/4", G5| (Thru spacer to clutch housing) Hex, 1/2"-13 x 1 3/4", G5| BOLT, (Replaces bolt 180179) Hex, 1/2"-13 x 1 3/4", G5| 433V+E, 533V+E, 633V+E and 733V+E| through spacer to clutch housing Hex, 1/2"-13 x 1 3/4", G5| Used with motor assembly 1343609C2, if used Hex, 1/2"-13 x 1 3/4", G5| For models 433, 533, 633| (Replaces bolt 180179) Hex, 1/2"-13 x 1 3/4", G5| 3 used with 915 combines, 4 used with 815 combines (Replaces bolt 180179) Hex, 1/2"-13 x 1 3/4", G5| (Replaces bolt K600804), Incl. Nut Hex, 1/2"-13 x 1 3/4", G5| (Replaces bolt K600804) Hex, 1/2"-13 x 1 3/4", G5| Supports to rear axle housing (Replaces bolt K600885) Hex, 1/2"-13 x 1 3/4", G5| 3 used per bearing Hex, 1/2"-13 x 1 3/4", G5| Grapple attachment Hex, 1/2"-13 x 1 3/4", G5| Bracket to reductions (Replaces bolt K600885) Hex, 1/2"-13 x 1 3/4", G5| 825 and 825A| - hex, 1/2 NC x 2 inch| Additional part for 5-row wide models Hex, 1/2"-13 x 1 3/4", G5| 5 row wide models, additional parts Hex, 1/2"-13 x 1 3/4", G5| - hex, 5/16 NC x 1 inch| Diesel engine tractors| SCREW, 1/2-13 x 2 hex-hd cap| Diesel Hex, 1/2"-13 x 1 3/4", G5| (Not Illustrated)| SCREW, 1/2-13 x 1-3/4 hex-hd cap, Unit A| SCREW, 1/2-13 x 1-3/4 hex-hd cap, Adjustable stop screw| x 11 GA Hex, 1/2"-13 x 1 3/4", G5| Bolt .500x1 .75 Grade 5
Система техники: HITCHES, DRAWBARS & IMPLEMENT COUPLINGS, FRAMES AND BALLASTING, Drive Train, PTO DRIVE SHAFT, ENGINE, ATTACHMENTS/HEADERS, SUPERSTRUCTURE, MAIN GEARBOX & DRIVE, Driveline, Operator's Platform / Separator Case, HYDROSTATIC DRIVE, Governor, ELECTRICAL SYSTEMS, ACCESSORIES, FEEDER, THRESHING, CLUTCH, CLEANING, BALE CHAMBER, POWER TRAIN, HYDRAULIC SYSTEMS, CHASSIS, HYDRAULICS, FRAME, Decals & Attachments, CHASSIS/ATTACHMENTS, PICKING SYSTEM, PICTORIAL INDEX, ROTOR, CONCANVES & SIEVE, HYDRAULIC SYSTEM, MAIN FRAME, STEERING, CHOPPER BODY, CROP CUTTING, Threshing / Separation / Cleaning, Propulsion, CROP CONDITIONING, ATTACHMENT, FUEL SYSTEM, COMPLETE MACHINE, ELECTRICAL, BALE EJECTOR, PRODUCT FEEDING, BRAKES, SOIL PREPARATION, CHASSIS ATTACHMENTS, MISCELLANEOUS, GRAIN TANK & UNLOADER, PLATFORM, CAB, BODYWORK AND DECALS, BEATER & CLEANING FANS, BASKET, GRAIN ELEVATORS & AUGERS, Chassis, Radiator & Sheet Metal, Steering Mechanism, Drawbars & Hitches, Picker Drum

Применяется на технике

SBX530
SBX520
SBX540
385
484
485
248
DCX161
DCX131
DCX131F
460
RDX161
475
1660
8580
8590
HDX141
HDX181
HDX121
HDX161
1680
435D
445D
953
923
404
2404
1640
CPX420
420

Ещё 330

2555
420 TIER 3
RBX561
8555
B-47
8575
8576
2377
2365
2366
2388
2344
8420
8825
8825HP
433E
533E
533V
684
685
HYDRO 84
268
574
2500
464
3688
3688HC
3088
3288
784
785
278
454
2400
2826
785XL
885XL
685XL
100
140
130
485XL
585XL
715
674
615
686
HYDRO 86
HYDRO 70
666
533
833
633
733
433
F-240
431
321
165
8880
CPX610
CPX620
620
8850
FARMALL A
FARMALL AV
FARMALL B
FARMALL BN
FARMALL CUB
INTERNATIONAL
1845C
1026
21026
766
966
1840
770
FV-267D
F-267D
FU-267D
F-270
B-450
F-235
531
541
FHX300
884
885
258
584
585
238
384
F-235D
606
2606
DCX91
2577
2588
SUPER C
403
8-51
FARMALL HV
FARMALL C
503
943
F-135D
FV-135D
323
383
453
423
303
RBX552
RBX562
RB464
RB554
RB564
RBX563
8-61
8-71
8435
DHX181
DHX361
DHX211
DHX301
DHX251
DHX182
DHX212
DHX302
DHX252
DHX362
DH252
DH182
DH212
DH302
DH362
RDX181
HDX142
HDX162
HDX182
353
E353
E423
SUPER A
SUPER A-1
SUPER AV
SUPER AV-1
2504
504
FARMALL MDV
FARMALL MV
300
350
414
230
240
200
9240
9250
9260
D-301
450-SERIES
400-SERIES
SUPER M
SUPER M-TA
5088
6088
7088
625
635
61MS
72MS
2300
354
1800
2055
9310
9330
9210
9230
9270
9280
2155
D-236
9350
46
3594
2096
3394
2594
1896
8340
8480
2394
8585CE
8585
DCX101
395
895
695
288
795
695XL
795XL
895XL
995XL
495
595
2188
1666
1400
1640E
1644
2166
1818
2144
1688
1620
1670
4000
5000
733E
833E
433V
633E
633V
1294
1835C
1660E
1680E
374
7130
6130
5130
DC515
2022
2044
1822
1844
8315
SC412
8380
8312
SC414
SC416
8360
8370
8240
8220
8230
8210
DT-407
D-407
RMX790
RMX370
370 TRUE-TANDEM
330 TRUE-TANDEM
TIGER-MATE
955
950
1010
1020
900
8600
856XL
8500
1210
1212
4800
1682
736
721
725
730
501
5600
5700
8455
1838
1825
CASE IH
1825B
1620E
596
8460
3950
8465T
8455T
885N
8465
810
825
1394
DT-414
D-414
856
2856
706
2706
C-221
57
616
622
C-263
656
CONCORD
C-282
C-291
C-301
1124
C-175
544
2544
2656
C-200
C-157
806
2806
435
445
364
5140
7140
6140
1250
6150
7150
CE630
5150

Сборочные узлы

TONGUE
MAIN FRAME
CLUTCH HOUSING AND CONNECTIONS
TONGUE DRIVELINE
SWIVEL TONGUE DRIVE SHAFT

Ещё 514

CARBURETED ENGINE, CRANKCASE FRONT COVER AND IDLER GEAR
CUTTERBAR, 12 DISC, NON SHOCK HUBS
PLATFORM, MOUNTING STEP AND TOOL BOX
POWER TAKE-OFF DRIVE
POWER TAKEOFF DRIVE
DRIVE ASSEMBLY, LEFT, AUXILIARY
DIVIDER BUNDLE
P.T.O. CENTRE BEARING BOX AND BRACKET
OPERATOR'S PLATFORM
SEPARATOR CASE
HYDROSTATIC MOTOR, SINGLE SPEED
GOVERNOR, FOOT PEDAL ACCELERATOR, HEEL OPERATED, INTERNATIONAL SERIES
GOVERNOR, FOOT PEDAL ACCELERATOR, TOE OPERATED, INTERNATIONAL SERIES
1020 HEADER HARNESS, PRIOR TO JJC0215000
HARNESS - CHASSIS
HARNESS - CENTER
HARNESS, CENTER TO REAR
HARNESS, CENTER TO REAR JJC0157150-
CROP SAVER WHEEL KIT
CHARGE AND STUFFER ASSEMBLY
SAFETY STOP
DRIVE SHAFT BEARING
ROTOR DRIVE, PULLEY AND CAM
CLUTCH, CLUTCH HOUSING, CONTROLS AND CONNECTIONS
CHAFFER DRIVE HANGER LEVER AND SUPPORT, HEAVY DUTY DRIVE, EXTENDED LENGTH CLEANING SYSTEM
KNOTTER AND MOUNTING ASSEMBLY
POWER TAKEOFF DRIVE; 2365: BSN JJC0245199 / 2366: BSN JJC0177519
POWER TAKEOFF DRIVE - BSN JJC0253999
POWER TAKEOFF DRIVE, BSN JJC0270499
POWER TAKEOFF DRIVE - BSN JJC0290499
POWER TAKEOFF DRIVE, ASN JJC0270500
POWER TAKEOFF DRIVE - ASN JJC0290500
POWER TAKEOFF DRIVE; 2365: ASN JJC0245200 / 2366: ASN JJC0177520
POWER TAKEOFF DRIVE - ASN JJC0254000
KNOTTER MOUNTING AND GREASE ZERK ASSEMBLY, NON-CENTRALIZED LUBE
KNOTTER MOUNTING AND GREASE ZERK ASSEMBLY
THREADER ASSEMBLY
TRANSMISSION DRIVE AND PUMP ASSEMBLY
KNOTTER LUBE ASSEMBLY
KNOTTER LUBE ASSEMBLY, CENTRALIZED, INCLUDES PAGES 6-38 THRU 6-44
FUEL TANK
AUXILIARY PUMP MOUNTING AND DRIVE, HEADER PUMP AND REEL DRIVE
HYDROSTATIC DRIVE HOUSING
HYDRO DRIVE HOUSING, CONTROL CAM, MULTI VALVE
DRIVE TRAIN, CLUTCH HOUSING AND CONNECTIONS
DRIVE TRAIN, CLUTCH HOUSING AND TRANSMISSION BRAKE HOUSING
HYDRO DRIVE HOUSING, CONTROL CAM, MULTI-VALVE
DRIVE TRAIN, HYDROSTATIC HOUSING, COVERS, DRIVE PLATE, HYD. PUMPS, MULT. CONTROL VALVE & CONNECTIONS
DRIVE TRAIN, CLUTCH HOUSING, CONTROLS AND CONNECTIONS
DRIVE TRAIN, CLUTCH AND CLUTCH HOUSING
DRIVE TRAIN, TRANS. SERVICE UNITS & CHASSIS GASKET SET UNIT, HYDROSTATIC TRANS. W/540 RPM PTO, BASIC
PLATFORM STEPS, RAILS AND TOOL BOX ASSEMBLY
REAR AXLE
CLUTCH CONTROLS & HOUSING
PICK-UP REEL, FOR DETACHABLE FEEDER PLATFORM
ROTOR DRIVE PULLEY AND CAM, EXTENDED LENGTH CLEANING SYSTEM
HYDRAULIC CIRCUIT, MODELS WITH 403900R93 ROLLOVER CYLINDER
HYDRAULIC CIRCUIT, MODELS WITH 85153C91 ROLLOVER CYLINDER
HYDRAULIC HEADER DRIVE ASSEMBLY - REAR (S.N. CFH0155001 THRU CFH0155299)
HYDRAULIC AND HYDROSTATIC PUMP MOUNTING
HYDRAULIC HEADER DRIVE ASSEMBLY - REAR (S.N. CFH0155300 AND LATER)
PUMP, AUXILIARY - MOUNTING AND DRIVE
HEADER DRIVE HYDRAULIC ASSEMBLY, REAR
CHASSIS, CLUTCH HOUSING, CONTROLS AND CONNECTIONS
FRAME, FIXED DRAWBAR AND SWINGING DRAWBAR, CUB LO-BOY TRACTORS
BALE ROLLER CHUTE KIT-CONTINUED
HEADER PIVOT SUPPORT, FOR 1600 COMBINES
FRAME, TWO POINT FAST HITCH, 666 TRACTORS ONLY
CASE COUPLER - SIDE LEVER, JAF0041368 - JAF0179684
FRAME, TWO POINT HITCH
FRAME, TWO POINT HITCH, 766 AND 966 TRACTORS WITH DRAFT CONTROL
COUPLER, HYDRAULIC, JAF0041711 -
CASE COUPLER
MANURE FORK, GRAPPLE AND LOADER ATTACHMENT BAR
DISKS AND BEARINGS
PLATES, FLOOR - GUARDS, DRIVE LINE
DRUM DRIVE - GEARBOX COUPLERS AND SUPPORT
GEARBOX - DRUM NUMBER 1 (4 ROW NARROW), DRUM NUMBER 2 (5 ROW NARROW AND 5 ROW WIDE)
GEARBOX - DRUM NUMBER 2 (5 ROW NARROW)
GEARBOX - DRUM NUMBER 2 (5 ROW NARROW), DRUM NUMBER 1 (4 ROW NARROW)
GEARBOX - DRUM NUMBER 3
GEARBOX - DRUM NUMBER 4
GEARBOX - DRUM NUMBER 3 (4 ROW NARROW), DRUM NUMBER 4 (5 ROW NARROW AND 5 ROW WIDE)
GEARBOX - DRUM NUMBER 4 (5 ROW NARROW), DRUM NUMBER 3 (4 ROW NARROW)
GEARBOX - DRUM NUMBER 2, 6 ROW NARROW
GEARBOX
GEARBOX - DRUM NUMBER 4 (5 ROW NARROW)
GEARBOX - DRUM NUMBER 3, 6 ROW WIDE AND DRUM NUMBER 2, 4 ROW WIDE
FEEDER - HOUSING AND ADAPTER
GEARBOX - DRUM NUMBER 4, 6 ROW WIDE AND 6 ROW NARROW, DRUM NUMBER 3, 4 ROW WIDE
FEEDER - SUPPORTS AND LIFT BRACKET
DRUM DRIVE
FEEDER - HOUSING AND ADAPTER ASN JJC0268800
FEEDER - HOUSING AND ADAPTER - ASN JJC0290300
FIELD TRACKER® - SUPPORT, HEADER PIVOT
DRUM LIFT SUPPORT
FIELD TRACKER® - SUPPORT, HEADER PIVOT BSN JJC0268799
FIELD TRACKER® - SUPPORT, HEADER PIVOT - BSN JJC0253999
FIELD TRACKER® - SUPPORT, HEADER PIVOT - BSN JJC0174399
FIELD TRACKER® - SUPPORT, HEADER PIVOT - BSN JJC0290299
FIELD TRACKER® - SUPPORT, HEADER PIVOT; 2365: BSN JJC0245199 / 2366: BSN JJC0177519
FIELD TRACKER® - SUPPORT, HEADER PIVOT - ASN JJC0174400
FIELD TRACKER® - SUPPORT, HEADER PIVOT; 2365: ASN JJC0245200 / 2366: ASN JJC0177520
FIELD TRACKER® - SUPPORT, HEADER PIVOT - ASN JJC0254000
FIELD TRACKER® - SUPPORT, HEADER PIVOT - ASN JJC0290300
FIELD TRACKER® - SUPPORT, HEADER PIVOT ASN JJC0268800
ROTOR DRIVE - GEARBOX MOUNTING
ROTOR DRIVE - GEARBOX MOUNTING - BSN HAJ0295001
ROTOR DRIVE - MOUNTING - ASN JJC0290800
ROTOR DRIVE - MOUNTING - ASN JJC0273000
ROTOR DRIVE - PULLEY AND CAM
ROTOR DRIVE - GEARBOX MOUNTING - ASN HAJ0295001
ROTOR DRIVE - PULLEY AND CAM - BSN JJC0273000
ROTOR DRIVE - PULLEY AND CAM - BSN JJC0290800
CHAFFER - DRIVE HANGER - ASN JJC0252950
CHAFFER - DRIVE HANGER; 2365: ASN JJC0245150 / 2366: ASN JJC0177400
SUPPORTS, MAIN FRAME AND CAB AND PLATFORM
SUPPORTS, MAIN FRAME, CAB AND PLATFORM
PLATFORM MOUNTING STEP AND TOOLBOX, MACHINE NOT FITTED W/CAB
CYLINDER HEAD AND MANIFOLDS
INJECTION SYSTEM, C. A. V.
HYDRAULIC SYSTEM, HYDRAULIC REMOTE CONTROL, FOR TRACTORS W/REAR HYDRAULIC MANIFOLD
HEADLIGHTS - SIDE LIGHTS - REAR RED LIGHTS, LICENSE PLATE
PICK-UP REEL, FEEDER PLATFORMS 12' & 14', ARMS, SUPPORTS, SHIELDS
ATTACHMENT LIFT
STEERING
HYDRAULIC SYSTEM, FRONT POWER TAKE-OFF, INTERNATIONAL SERIES
PLATFORM, MOUNTING STEP AND TOOLBOX
PLATFORM, MOUNTING STEP AND TOOLBOX - MACHINE NOT FITTED, WITH CAB
PLATFORM, MOUNTING STEP AND TOOLBOX, MACHINE NOT FITTED WITH CAB
PLATFORM MOUNTING STEP AND TOOLBOX
SUPERSTRUCTURE, FENDER AND OPERATOR'S PLATFORM, CARBURETED ENGINE TRACTORS
SUPERSTRUCTURE, FENDER AND OPERATOR'S PLATFORM, DIESEL ENGINE TRACTORS
CAB INSULATORS - DE-LUXE CAB
CAB INSULATORS, DE-LUXE CAB
PLATFORM, MOUNTING STEP AND TOOLBOX, MACHINES NOT FITTED W/ISO MOUNTED CAB
SUPERSTRUCTURE, SAFETY FRAME, UPPER, AND FENDERS
CUTTERHEAD & POWER TAKE OFF, SHEARBOLT
HYDRAULIC SYSTEM, HYDRAULIC DRAFT OR LIFT CONTROL
CUTTERBAR
ROLLS CUTTERBAR
HYDRAULIC SYSTEM, CYLINDER BLOCK & HEAD, PISTONS, RODS, REGULATOR AND CHECK VALVES & CONNECTIONS
CLUTCH AND CLUTCH HOUSING, FOR HYDROSTATIC GROUND DRIVE
GRAIN PAN
HYDRAULIC DIAGRAM, FULL LEVELING, FOR HYDROSTATIC GROUND DRIVE
CHASSIS, REAR AXLE, FARMALL "HV" ONLY
HYDRAULIC SYSTEM, CYL. BLOCK & HEAD, PISTONS, RODS, REGULATOR & CHECK VALVES & CONNECTIONS
HYDRAULIC SYSTEM, HYDRAULIC REMOTE CONTROL, FOR TRACTORS WITH REAR HYDRAULIC MANIFOLD
SINGLE CLUTCH HOUSING AND CONNECTIONS, 323/383/423/453/E383/E423/E453
HYDRAULIC MOTOR ASSY, FOR HYDROSTATIC GROUND DRIVE
HYDRAULIC DIAGRAM, FOR HYDROSTATIC GROUND DRIVE
DOUBLE CLUTCH HOUSING AND CONNECTIONS, 323/383/423/453/E383/E423/E453
DIA KIT, AUTOMATIC HITCH, CABLE PULL
DIA KIT, CROP SAVER WHEEL
PROPULSION SPEED VARIATOR
MAIN DRIVE ASSEMBLY
FLYWHEEL HOUSING
STUFFER, FRAME AND SUPPORT ASSEMBLIES
DECK, RH, PRIOR TO PIN K01 2002
DECK, RH, 18 FT, FROM PIN K01 2002
DECK, RH, 21, 25, 30, & 36 FT, FROM PIN K01 2002
DECK, LH, PRIOR TO PIN K01 2002
DECK, LH, 18 FT, FROM PIN K01 2002
DECK, LH, 21, 25, 30, & 36 FT, FROM PIN K01 2002
HYDRAULIC DECK SHIFT, DOUBLE SWATH, 25 & 30FT
DECK, RH, DHX182
DECK, RH, DHX212 TO DHX362
DECK, LH, DHX182
DECK, LH, DHX212 TO DHX362
HYDRAULIC DECK SHIFT, DOUBLE SWATH
CROSS AUGER, 25 & 30 FT, PRIOR TO PIN Y8ZB00545
CROSS AUGER, 36 FT, PRIOR TO PIN Y8ZB00545
CUTTERBAR, 14 DISC, NON SHOCK HUBS, BPIN Y7B667799
CROP DIVIDER
WIDE ADJUSTABLE FRONT AXLE
ATTACHMENTS, ELECTRALL, SPECIAL, GENERATOR AND EXCITER
SINGLE CLUTCH HOUSING AND CONNECTIONS
HYDRAULIC SYSTEM, CYLINDER BLOCK & HEAD, PISTONS, RODS, REGULATOR & CHECK VALVES & CONNECTIONS
DOUBLE CLUTCH HOUSING AND CONNECTIONS
CHASSIS, REAR AXLE, "MV" AND "MDV" TRACTORS
REAR AXLE, 323/383/423/453/E383/E423/E453
FRONT AXLE, 323/383/423/453/E383/E423/E453
SEPARATOR CASE FOR 321
CHASSIS, SEAT & SUPPORTS, FOR TRACTOR EQUIPPED W/FLAT SPRING MOUNTED OR DELUXE CUSHION SEAT
SEPARATOR CASE FOR 431
CRANKCASE FRONT COVER AND IDLER GEAR, 414 SER. NOS. CH813F - CH1568G, 420 SER. NOS. CH1372F - 2820G
GUIDE WHEEL AXLE
ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLE ATTACHMENT, SPECIAL, FARMALL 200 & 230 TRACTORS
FRONT AXLE
THROTTLE CONTROLS, ROPS MODELS
CLUTCH HOUSING ADAPTER
WATER PUMP, ALL MACHINES WITH ENGINE SERIAL NUMBERS PRIOR TO 5680
CHASSIS, REAR AXLE, (FOR ALL HI-CLEAR TRACTORS)
CHASSIS, REAR AXLE, SUPER "MV" AND "MDV"
ATTACHMENTS, FAST-HITCH W/TRACTION CONTROL, FARMALL 230 TRACT ORS, DRAWBAR, SOCKET BEAMS & BAIL
ATTACHMENTS, DRAWBAR AND BAIL
ATTACHMENTS, BAIL & CONNECTIONS, FARMALL AND INTERNATIONAL 240 TRACTORS
HYDRAULIC TRAILER BRAKE, 383/423/453
ATTACHMENTS, SIDE PLATES, LATERAL SWING LIMITER AND SHAFT, FARMALL AND INTERNATIONAL 240 TRACTORS
ATTACHMENTS, FAST-HITCH WITH TRACTION CONTROL, SPECIAL, DRAWBAR, SOCKET BEAMS & BAIL
ATTACHMENTS, POWER TAKE-OFF, SPECIAL, TRANSMISSION DRIVEN TYPE
PUMP, AUXILIARY - MOUNTING
PACKAGER HYDRAULIC PUMP SYSTEM
C-221 ENGINE, 3-9/16 X 3-11/16, CRANKCASE AND RELATED PARTS
C-221 ENGINE, 3-9/16 X 3-11/16, CRANKCASE FRONT COVER AND IDLER GEAR
PULLEYS, BLADES AND SPINDLES
PULLEYS, BLADES AND SPINDLES, 245 AND 255 TRACTORS
CHASSIS, RADIATOR GRILLE
ENGINE HARNESS
GROUND SPEED SENSOR
FIELD TRACKER, 1020 HEADER HARNESS
CENTER TO REAR HARNESS
ALTERNATOR-GENERATOR MOUNTING BRACKETS / ENGINE SUPPORT / GLOW PLUGS & CABLES
MOUNTING BRACKETS AND WHEELS, 245 AND 255 TRACTORS
TWISTER BASE PLATE, DRIVE FRAME AND BALE COUNTER, FOR NO. 46 -W BALER
HYDRAULIC TRAILER BRAKE
STEERING WHEEL AND ADJUSTABLE COLUMN
STEERING WHEEL AND COLUMN
HAY CONDITIONER ASSEMBLY, UPPER ROLL & TENSIONER
TAILGATE LATCH ASSEMBLY
FINGER MOUNTING ASSEMBLY
PULLEYS, BLADES AND SPINDLES, 275 TRACTOR
MOUNTING BRACKETS AND WHEELS, 275 TRACTOR
LIFT AND MOUNTING BRACKETS, 275 TRACTOR
BATTERY AND BATTERY CABLES
POWER TAKEOFF DRIVE, - JHF0032175
POWER TAKE-OFF DRIVE (CONT'D)
CLUTCH HOUSING
POWER TAKEOFF DRIVE (CONT'D)
POWER TAKEOFF DRIVE, HCC0020001 -, Y4C621136 -
CLUTCH
POWER TAKE OFF DRIVE
PUMP MOUNTING
KNOTTER MOUNTING ASSEMBLY
POWER TAKEOFF DRIVE (CON'T)
POWER TAKEOFF DRIVE, (CONT)
DIFFERENTIAL, BEARING CARRIER, CAGE, SIDE GEAR AND SHAFT
HYDROSTATIC MOTOR, SINGLE-SPEED, - JJC0100000
DIFFERENTIAL, BEARING CARRIER, CAGE, SIDE GEAR AND SHAFT, PRIOR TO TRANSMISSION SERIAL NO. 16260432
DIFFERENTIAL, BEARING CARRIER, CAGE, SIDE GEAR AND SHAFT, TRANSMISSION SERIAL NO. 16260432 AND AFTER
HYDROSTATIC MOTOR (CONT'D)
HYDROSTATIC MOTOR ASSEMBLY, SINGLE SPEED, CORN, GRAIN AND RICE, P.I.N. JJC0047918 & AFTER (CONT'D)
HYDROSTATIC MOTOR, SINGLE-SPEED, SERIAL NUMBER - JJC0114001
HYDROSTATIC MOTOR, SINGLE-SPEED, SERIAL NUMBER JJC0114001 -
MFD DRIVE TRAIN
HYDROSTATIC MOTOR, TWO-SPEED, SERIAL NUMBER JJC0114001 -
HYDROSTATIC DRIVE, FIXED SINGLE SPEED
HYDROSTATIC DRIVE, VARIABLE TWO SPEED
KNOTTER MOUNTING
FINAL DRIVE HOUSING SUPPORT AND BRACKETS, LOW PROFILE SPECIAL
KNOTTER LUBE ASSEMBLY, CENTRALIZED
HYDROSTATIC MOTOR, 1640E
TANDEM PUMP MOUNTING
HYDROSTATIC MOTOR, 1660E AND 1680E, SINGLE SPEED
HYDROSTATIC MOTOR, PRIOR TO P.I.N. JJC0096001
HYDROSTATIC MOTOR, PRIOR TO P.I.N. JJC0097001 (CONT'D)
FRONT END WEIGHT ATTACHMENT
HYDROSTATIC MOTOR, P.I.N. JJC0096001 AND AFTER
HYDROSTATIC MOTOR (CON'T)
DOUBLE CLUTCH HOUSING & CONNECTIONS
HYDROSTATIC MOTOR, TWO SPEED
HYDROSTATIC MOTOR, P.I.N. JJC0097001 AND AFTER (CONT'D)
HYDROSTATIC MOTOR, SINGLE SPEED, CORN AND GRAIN COMBINE
HYDROSTATIC MOTOR, SINGLE SPEED, 128120C97 (CONT'D)
HYDROSTATIC MOTOR, (CONT)
HYDROSTATIC MOTOR, SINGLE SPEED, PRIOR TO P.I.N. JJC0041567 (CONT'D)
HYDROSTATIC MOTOR, SINGLE SPEED, 1958081C1 (CONT'D)
HYDROSTATIC MOTOR, SINGLE SPEED, PRIOR TO P.I.N. JJC0044502 (CONT'D)
HYDROSTATIC MOTOR ASSEMBLY, TWO SPEED
HYDROSTATIC MOTOR, SINGLE SPEED, P.I.N. JJC0041567 & AFTER, MODLS W CROSS FLOW CLEANING SYS (CONT'D)
HYDROSTATIC MOTOR, SINGLE SPEED, P.I.N. JJC004502 AND AFTER (CONT'D)
HYDROSTATIC MOTOR, TWO SPEED, MOTOR BLOCK (CONT'D)
HYDROSTATIC MOTOR, TWO SPEED, PRIOR TO P.I.N. JJC0044502 (CONT'D)
CROSS AUGER, 25, 30 & 36 FT, PRIOR TO PIN C20 2003
CROSS AUGER, 25, 30 & 36 FT, FROM PIN C20 2003
30 FT CROSS AUGER, 36 FT MODEL, PRIOR TO PIN C20 2003
30 FT CROSS AUGER, 36 FT MODEL, FROM PIN C20 2003
GEARBOX, DRUM NUMBER 2, 6 ROW NARROW
GEARBOX - DRUM NUMBER 3, 6 ROW WIDE
GEARBOX, DRUM NUMBER 3, 6 ROW WIDE
GEARBOX, DRUM NUMBER 4, 6 ROW WIDE AND 6 ROW NARROW
GEARBOX - DRUM NUMBER 4, 6 ROW WIDE AND 6 ROW NARROW
DRIVER ASSEMBLY ROTOR GEARBOX, MOUNTING
ROTOR, GEARBOX, MOUNT
BRAKE CONTROLS
MASTER BRAKES
TONGUE AND FRAME ASSEMBLY
MASTER BRAKES, USED WITH 1975664C1 WHEEL BRAKE ACTUATOR
MASTER BRAKES, USED WITH WHEEL BRAKE ACTUATOR, ITEM 60
FLOTATION ASSEMBLY - RIGHT (SC412)
MASTER BRAKES, USED WITH WHEEL BRAKE ACTUATOR, ITEM 40
HEADER FRAME AND FLOTATION ASSEMBLY RIGHT
TONGUE AND FRAME ASSEMBLY, SWIVEL
FLOTATION ASSEMBLY, RIGHT
MASTER BRAKES, USED WITH WHEEL BRAKE ACTUATOR WITH SUPPORT
TONGUE AND FRAME ASSEMBLY, STANDARD
HEADER FRAME AND FLOTATION ASSEMBLY, RIGHT, 12 FOOT
FLOTATION ASSEMBLY - RIGHT (SC414)
HEADER FRAME AND FLOTATION ASSEMBLY, RIGHT, 14 FOOT
STRUT AND HUB ASSEMBLY, RIGHT
SUPPORTS, ENGINE SUPPORT, 815 AND 915 COMBINES / ALTERNATOR-GENERATOR BRACE
ALL PURPOSE NON FOLDING FRONT MAIN DISK GANG PARTS
ALL PURPOSE NON FOLDING REAR MAIN DISK GANG PARTS
SPIKE TOOTH HARROW
9 INCH RIGID MAIN GANG PARTS 2006 AND PRIOR UNITS
9 INCH RIGID MAIN GANG PARTS 2007 AND AFTER MODELS
FINISHING FOLDING LH AND RH FRONT WING DISK GANG PARTS SERIAL NUMBER JFH0034091 AND PRIOR
FINISHING FOLDING REAR MAIN DISK GANG PARTS SERIAL NUMBER JFH0034091 AND PRIOR
FINISHING FOLDING LH REAR WING DISK GANG PARTS SERIAL NUMBER JFH0034091 AND PRIOR
7-1/2 INCH MAIN GANG SCRAPER PARTS - SERIAL NUMBER JFH0043969 AND PRIOR
FINISHING FOLDING RH REAR WING DISK GANG PARTS SERIAL NUMBER JFH0034091 AND PRIOR
9 INCH RIGID WING GANG PARTS 2006 AND PRIOR UNITS
7-1/2 INCH WING GANG SCRAPER PARTS - SERIAL NUMBER JFH0043969 AND PRIOR
ALL-PURPOSE FOLDING FRONT MAIN DISK GANG PARTS
ALL-PURPOSE FOLDING LH AND RH FRONT WING DISK GANG PARTS
ALL-PURPOSE FOLDING REAR MAIN DISK GANG PARTS
ALL-PURPOSE FOLDING LH REAR WING DISK GANG PARTS
ALL-PURPOSE FOLDING RH REAR WING DISK GANG PARTS
BLOWER PUMP HYDRAULIC SYSTEM, 12 ROW NARROW - VERTICAL FOLD
BLOWER PUMP HYDRAULIC SYSTEM, 12 ROW NARROW, VERTICAL FOLD
BLOWER PUMP HYDRAULIC SYSTEM, 12 AND 16 ROW NARROW, FRONT FOLD, 12 ROW WIDE, FRONT FOLD
BLOWER PUMP HYDRAULIC SYSTEM, 12 AND 16 ROW NARROW, FRONT FOLD
REEL DRIVE MOTOR SYSTEM
HYDRAULIC DRIVE ASSEMBLY - FRONT
HYDRAULIC DRIVE ASSEMBLY, SC414D, FRONT
TONGUE AND HYDRAULIC DRIVE ASSEMBLY, OLD STYLE
REEL DRIVE MOTOR HYDRAULIC SYSTEM
HYDRAULICS, CHARGING PUMP, OIL FILTER AND INLET FILTER
CHARGING PUMP
HEADER LIFT PUMP, MOUNTING AND DRIVE, PRIOR TO P.I.N. JJC0096043
HEADER LIFT PUMP, MOUNTING AND DRIVE, PRIOR TO SERIAL NO. JJC0097103
HEADER LIFT PUMP, MOUNTING AND DRIVE, SERIAL NO. JJC0097103 THROUGH SERIAL NO. JJC0097189
HEADER LIFT PUMP, SERIAL NUMBER - JJC0114000
HEADER LIFT PUMP, MOUNTING AND DRIVE, P.I.N. JJC0096043 THROUGH JJC0096094
HEADER LIFT PUMP, MOUNTING AND DRIVE, PRIOR TO P.I.N. JJC0102897
TONGUE AND HYDRAULIC DRIVE ASSEMBLY, NEW STYLE
HEADER LIFT PUMP, SERIAL NUMBER JJC0114001 - JJC0114164
HEADER LIFT PUMP, MOUNTING AND DRIVE, P.I.N. JJC0102897 - JJC0103799
AUXILIARY PUMP, MOUNTING AND DRIVE, HEADER LIFT AND REEL DRIVE, SERIAL NUMBER JJC0114165 -
HEADER LIFT PUMP, - JJC0100027
HEADER LIFT PUMP MOUNTING AND DRIVE, PRIOR TO P.I.N. JJC0115352
HEADER LIFT PUMP, JJC0100028 - JJC0100279
HEADER LIFT PUMP MOUNTING & DRIVE, P.I.N. JJC0115352 THROUGH JJC0117060
BLOWER PUMP HYDRAULIC SYSTEM, CYCLO AIR TRAILING, 12 ROW NARROW
AUXILIARY PUMP DRIVE, JJC0100280 -
AUXILIARY PUMP MOUNTING & DRIVE, HEADER PUMP & REEL, P.I.N. JJC0117060 & AFTER
BLOWER PUMP HYDRAULIC SYSTEM
BLOWER PUMP HYDRAULIC SYSTEM, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES
BLOWER PUMP HYDRAULIC SYSTEM, 12 ROW NARROW, VERTICAL FOLD, 11 ROW & 15 ROW SOLID ROW CROP
HYDRAULIC DRIVE ASSEMBLY, SC416D, FRONT
HYDRAULIC PUMP MOUNTING, WITH SLIDE ADJUSTABLE SUPPORT PARTS
DRAFT SENSING VALVE AND PIPES- SENSODRAULIC
OIL COOLER AND CONNECTIONS
HYDRAULIC PUMP MOUNTING
HEADER LIFT PUMP MOUNTING AND DRIVE
TONGUE AND HYDROSTATIC DRIVE ASSEMBLY, FRONT
AUXILIARY HYDRAULIC PUMP MOUNTING
BLOWER PUMP HYDRAULIC SYSTEM, 12 ROW NARROW - VERTICAL FOLD, 6/11 ROW & 8/15 ROW SOLID ROW CROP
AUXILIARY PUMP, DRIVE AND MOUNTING
HYDRAULIC PUMP, MOUNTING
BLOWER PUMP HYDRAULIC SYSTEM, RESERVOIR TO PUMP & PUMP MOUNTING PARTS
AUXILIARY PUMP DRIVE
PUMP AUXILIARY, MOUNTING AND DRIVE
THREE-POINT LINKAGE, 1210Q, 1212Q, 1210SK AND 1212SK TRACTORS FOR EUROPE ONLY
TRANSPORT CHAIN AND HOSE SUPPORTS
DRAWBAR, WITH HITCH
MAIN FRAME, WITH CENTER SUPPORT ON FRONT FRAME
SEPARATOR DRIVE
ROTOR DRIVE
FENDERS, FRAME PLATFORMS AND ROPS ATTACHMENT, WITH REINFORCED FULL FENDERS
WHEELS, CASTERS AND WHEEL LOCKS
CAB AND FOUR POST ROPS FRAME, FRONT AND REAR MOUNTS
FRONT AND REAR PLATFORM MOUNTS, PLATFORM, CAB OR FOUR POST ROPS FRAME
FRONT AND REAR PLATFORM MOUNTS, PLATFORM, CAB OR FOUR POST ROPS FRAMES
WING FRAME AXLE AND DEPTH CONTROL, NON LEVEL MODELS, SINGLE & DOUBLE FOLD PRIMARY WING
WING FRAME AXLE AND DEPTH CONTROL, NON LEVEL LIFT MODELS, DOUBLE FOLD SECONDARY WING, 45 FOOT WIDE
PICKUP LIFT KIT (HYDRAULIC), (HK50446 PICKUP LIFT KIT
WING LIFT, NON LEVEL LIFT MODELS, SINGLE FOLD, 25 FOOT THROUGH 31 FOOT WIDE
CAB AND 4 POST ROPS FRAME, FRONT AND REAR MOUNTS
CASE COUPLER, PRIOR TO P. I. N. JAF0183047
REAR COUNTERWEIGHT AND SWING OUT DOOR
REAR COUNTERWEIGHT AND SWING OUT DOOR, DIESEL MODELS
SHOE CHAFFER HANGER AND SUPPORT
GRAIN TANK UNLOADER BELT DRIVE, WITHOUT STRAW CHOPPER
PEG TOOTH MULCHER
REAR COUNTERWEIGHT AND SWING OUT DOOR, GASOLINE MODELS
GRAIN TANK UNLOADER BELT DRIVE, WITH STRAW CHOPPER
STRAW CHOPPER DRIVE
BALE ROLLER CHUTE KIT, (CON'T)
MANURE FORK & GRAPPLE
GRAIN TANK UNLOADER CONTROL
DISK AND GANG
DISC OPENER AND GAUGE WHEEL, STEEL, CYCLO AIR AND PLATE PLANTERS
DISC OPENER AND GAUGE WHEEL, NYLON, WITH LEFT HAND LEADING DISC OPENER, ON R.H. SIDE OF PLANTER
DISC OPENER AND GAUGE WHEEL, NYLON, WITH RIGHT HAND LEADING DISC OPENER, ON L.H. SIDE OF PLANTER
PICKUP LIFT KIT, HYDRAULIC, HK50446 PICKUP LIFT KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY
BALE ROLLER CHUTE ASSEMBLY, (CON'T)
TRASH GUARD (DISK SCRAPER) - CUSHION GANG, 7-1/2 & 9 INCH
CASE COUPLER, PRIOR TO P.I.N. JAF0183047
FENDERS AND FRAME PLATFORMS, 885, 885G AND 885H TRACTORS WITH REINFORCED FULL FENDERS
FENDERS, FRAME PLATFORMS AND SAFETY FRAME, 885 NARROW TRACTORS
STANDARD REAR FENDERS AND MOUNTINGS, TRACTORS WITHOUT CAB
LIQUID FERTILIZER APPLICATOR, RIDGE TILLAGE ATTACHMENT CYCLO AIR & PLATE TRAILING PLANTERS
MANURE FORK AND GRAPPLE
ARMS, SUPPORTS, FOR - 3.070 M -
ARMS, SUPPORTS, FOR - 3.68, 4.29, 4.89 M
REEL DRIVE AND SUPPORT ARMS (CONT'D)
TWO POST ROLL OVER PROTECTIVE STRUCTURE - FOLDING, NORTH AMERICA ONLY
UNLOADER CONTROL
PLATFORM MOUNTING STEP AND TOOL BOX, VERSION WITHOUT CAB
SUPPORTS, MAIN FRAME, CAB, PLATFORM, AND MAST
FIELD TRACKER, HEADER PIVOT SUPPORT
FEEDER REVERSER, WITHOUT ROCK TRAP
DRIVE WHEEL MECHANICAL CLUTCH PARTS, 12/23 SOLID ROW CROP - FRONT FOLD
REEL DRIVE
FEEDER DRIVE WITH ROCK TRAP, (CON'T)
GEARBOX DRUM NUMBER 2, 4 ROW WIDE, DRUM NUMBER 2, 5 ROW NARROW)
FEEDER DRIVE WITHOUT ROCK TRAP, (CON'T)
GEARBOX, DRUM NUMBER 3, 4 ROW WIDE, DRUM NUMBER 4, 5 ROW NARROW
REEL DRIVE, 5 BAT REEL
REEL DRIVE, 6 BAT PICK-UP REEL
DRUM DRIVE GEARBOX COUPLERS & SUPPORT
DRUM DRIVE GEARBOX COUPLERS AND SUPPORT
FEEDER - HOUSING AND ADAPTER, JJC0268800 -, HCC0020001 -, Y4C621136 -
FIELD TRACKER - SUPPORT, HEADER PIVOT, - JJC0268799, - JHF0032175
DRUM HANGER ASSEMBLY, 5 ROW NARROW, PRIOR TO P.I.N. JJC0155439
FIELD TRACKER - SUPPORT, HEADER PIVOT, JJC0268800 -, HCC0020001 -, Y4C621136 -
DRUM HANGER ASSEMBLY, 4 ROW WIDE, PRIOR TO P.I.N. JJC0155439
TOOLBAR ASSEMBLY, WITH AMBER REFLECTOR ONLY - ITEM 19
ROTOR DRIVE MOUNTING
ROTOR DRIVE PULLEY AND CAM, - JJC0026710
ROTOR DRIVE PULLEY AND CAM
ROTOR DRIVE PULLEY AND CAM, JJC0026711 -
ROTOR DRIVE, PRIOR TO P.I.N. JJC0024223
ROTOR DRIVE, MOUNTING
ROTOR DRIVE, PRIOR TO P.I.N. JJC0026711
ROTOR DRIVE PULLEY AND CAM, PRIOR TO P.I.N. JJC0028498
CHAFFER DRIVE HANGER LEVER AND SUPPORT, STANDARD DRIVE, GRILLE STANDARD
ROTOR DRIVE - MOUNTING, HCC0020502 -, Y4C621136 -
ROTOR DRIVE PULLEY AND CAM, P.I.N. JJC0028498 AND AFTER
ROTOR DRIVE, PULLEY AND CAM, PRIOR TO P.I.N. JJC0026711
ROTOR DRIVE, P.I.N. JJC0024223 AND AFTER
ROTOR DRIVE, P.I.N. JJC0026711 & AFTER
ROTOR DRIVE, PULLEY AND CAM, P.I.N. JJC0026711 AND AFTER
SHAKER SHAFT AND AUGER DRIVE
CHAFFER DRIVE HANGER LEVER AND SUPPORT
CHAFFER DRIVE HANGER LEVER AND SUPPORT, STANDARD DRIVE,PRIOR TO P.I.N. JJC0039550
CHAFFER DRIVE HANGER LEVER AND SUPPORT, HEAVY DUTY DRIVE, P.I.N. JJC0039550 AND AFTER
SLOW SPEED FAN DRIVE, SERIAL NUMBER - JJC0114634
SLOW SPEED FAN DRIVE
BASKET PIVOT SUPPORT
SLOW SPEED FAN, DRIVE
ENGINE RAILS, COMBINES WITH D-414 ENGINES AND SERIAL NUMBERS PRIOR TO 18001
DISK OPENER AND GAUGE WHEEL, ALL RIGID, VERTICAL FOLD, AND FRONT FOLD PLANTERS
DISC OPENER & GAUGE WHEEL, W/LEFT-HAND LEADING DISC (ON RIGHT HAND SIDE OF PLANTER)
DISK OPENER AND GAUGE WHEEL
DISC OPENER & GAUGE WHEEL, W/RIGHT-HAND LEADING DISC (ON LEFT HAND SIDE OF PLANTER)
DISC OPENER AND GAUGE WHEEL, WITH LEFT-HAND LEADING DISC OPENER, ON R.H. SIDE OF PLANTER
DISC OPENER AND GAUGE WHEEL, WITH RIGHT-HAND LEADING DISC OPENER, ON L.H. SIDE OF PLANTER
GRAIN ELEVATOR DRIVE
TAILINGS ELEVATOR DRIVE
UNLOADER CONTROL, CLUTCH CONTROLS
MAIN FRAME AND PLATFORM SUPPORT
OPERATORS PLATFORM
UNLOADER, CLUTCH CONTROL
LIQUID FERTILIZER PISTON PUMP SYSTEM, PUMP MOUNTING AND
CAB AND PLATFORM SUPPORT
MAIN FRAME AND CAB AND PLATFORM SUPPORTS
OPERATORS PLATFORM (CONT'D)
CHASSIS, RADIATOR AND SHEET METAL, CLUTCH HOUSING AND COVERS
CRANKCASE FRONT COVER AND IDLER GEAR
ENGINE SUPPORTS
WIRE NEEDLES AND NEEDLE PITMAN
POWER TRAIN, MAIN DRIVE GEAR BOX
CRANKCASE FRONT COVER AND IDLER GEAR, 403 AND 615 COMBINES
CRANKCASE FRONT COVER AND IDLER GEAR, 50 FORAGE HARVESTERS
POWER TRAIN, REAR AXLE, FARMALL HI-CLEAR TRACTORS
FLYWHEEL HOUSING, 50 FORAGE HARVESTERS
WING FRAMES WITH ROCKSHAFTS & WHEEL GANGS, 3612 - 4412, 3 & 4 RANK, RIGHT HAND WING SHOWN
FRAME EXTENSIONS OPTIONS
CARBURETED ENGINES, CRANKCASE FRONT COVER AND IDLER GEAR
SMOOTH FEED ROLL
CRANKCASE FRONT COVER AND IDLER GEAR, 453 AND 715 COMBINES
COVER, CLAMP & GRILL
CRANKCASE FRONT COVER AND IDLER GEAR, 3400A AND 3514 TRACTORS
CRANKCASE FRONT COVER AND IDLER GEAR, 375 WINDROWERS
CRANKCASE FRONT COVER AND IDLER GEAR, 454, 464, 2400A, 2400B & 2405B TRACTORS
HYDRAULICS SYSTEM, HYDRAULIC MOTOR ASSY, SUNDSTRAND, FOR
HYDRAULICS SYSTEM, HYDRAULIC DRAFT CONTROL, FARMALL TRACTORS WITH SERIAL NO. 14292 AND ABOVE
HYDRAULICS, HYDRAULIC DRAFT CONTROL, FARMALL TRACTORS WITH SERIAL NO. 44855 AND ABOVE
HYDRAULICS, DRAFT CONTROL, INTERNATIONAL TRACTORS WITH SERIAL NO.14030 AND BELOW
HYDRAULICS SYSTEM, HYDRAULIC DRAFT CONTROL, INTERNATIONAL TRACTORS WITH SERIAL NO. 15787 AND ABOVE
HYDRAULICS SYSTEM, HYDRAULIC REMOTE CONTROL, TRACTORS WITH REAR HYDRAULIC MANIFOLD
HYDRAULICS, HYDRAULIC REMOTE CONTROL, TRACTORS WITH REAR HYDRAULIC MANIFOLD
CRANKCASE FRONT COVER AND IDLER GEAR, 544, 2544 TRACTORS AND 8000 FORK LIFTS
CRANKCASE FRONT COVER AND IDLER GEAR, 574, 674, 2500A, 2500B, 2505B, 2510B AND 2514B TRACTORS
STEERING MECHANISM, FRONT AXLE AND CONNECTIONS, INTERNATIONAL TRACTORS WITH ALL WHEEL DRIVE
DRAWBARS AND HITCHES, TWO POINT FAST HITCH
DRAWBARS AND HITCHES
DRAWBARS AND HITCHES, TWO POINT HITCH
PICKER DRUM, SPINDLE MOISTENERS
BATTERY,CABLES AND MOUNTING
GEARBOX, ROTOR, MOUNTING PARTS; (VAR) 425200005, 425200015, 425200055, 425200065, 425200075, 425200095, 425200105, 425200686, 425200696, 425200726, 425200736, 425200746, 425200756, 425200766, 425400085, 425400716
CLEANING FAN DRIVE SPEED CONTROL
ROTOR, GEARBOX, MOUNT; (Prod Date) after 01-MAR-2015; (VAR) 425400127, 425400137, 425400147, 425400157, 425400167, 425400177, 425400187, 425400197, 425400287
GEARBOX, ROTOR, MOUNTING PARTS; (VAR) 425400336, 425400346, 425400356, 425400366, 425400376, 425400386, 425400396, 425400406, 425400416, 425400796, 425400806, 425700006, 425700016, 425700026, 425700036, 425700046, 425700056, 425700066, 425700076, 425700086, 425700096, 425700106
LIQUID FERTILIZER COULTER RIGHT SIDE BEFORE SERIAL NUMBER YCS0028601
LIQUID FERTILIZER COULTER LEFT SIDE BEFORE SERIAL NUMBER YCS0028601
TANDEM GEAR PUMP
ROTOR GEARBOX SUPPORT
GEARBOX, ROTOR, MOUNTING PARTS; (VAR) 425700176, 425700186, 425700196, 425700206, 425700226, 425700236, 425700246, 425700266, 425700276
BATTERY - BOX
GEARBOX, ROTOR, MOUNTING PARTS
ROTOR, GEARBOX, MOUNT; (VAR) 425400607, 425400657, 425400687, 425400697, 425400777, 425400787, 425400797, 425400807, 425400817, 425400827, 425400837, 425400847, 425400857, 425400867, 425400877, 425400887, 425400897, 425400907, 425400987

Заменён на

9707516
72187217

Данные каталога производителя. Связанные номера показаны так, как их указывает производитель; перед заказом замены уточните совместимость у менеджера.